Life Handle CLIP-ON DRINK HOLDER User manual

WARNINGS
The product is designed to hold insulated beverage
containers that operate as the manufacturer of that
container intended of approxmiately 24 oz or less
depending on size and design.
This product is not made for beverage container
materials that will eventually fail. These materials
include, but are not limited to, paper and certain
plastics/Styrofoam. The user of this product is urged
to use caution if securing a glass beverage holder as
beverage containers (bottles) made of glass may
break. Caution is urged when beverages are
extremely hot and/or when beverages are carbonat-
ed. Users are urged to use caution when using this
product to secure a beverage container that is open,
not sealed, or not sealable. User movements may
lead to spillage whether the beverage container is
sealed or not. The user is urged to carefully secure
the beverage container and closely monitor the
beverage container and the band while in use. The
user of this product uses it at their own risk. Users
should use this product as it was intended and
exercise reasonable judgment. LifeHandle does not
extend or offer any warranty or guarantee to the
beverage container product used with this product.
User voids any warranty/replacement if this product
is not used in the manner outlined in the instructions.
PARA-CORD
TOGGLES
SECURING
PEGS
DRINK
HOLDER A
ALLIGATOR
CLIP
LOOPS
BAND
MAINTENANCE AND CLEANING
Wipe clean with a damp cloth.
Spot clean with mild soap if needed.
Let air dry.
Not machine washable.
Not dishwasher-safe.
INSTRUCTION MANUAL
CLIP-ON DRINK HOLDER

Before filling up your beverage
container, firmly secure the Drink
Holder approximately a half inch
from the lid of the container. Align
rigid plastic part of the Drink Holder
with the mouth/opening of your
beverage container.
Pull the Band tightly
around beverage
container. Hook
closest loop onto to
Securing Peg. To
remove, extend the
Band so the loop is
released from the
Securing Peg.
Use the Securing Peg on the
band to retain any excess length.
Use the para-cord
toggles to adjust to
your preferred length.
Attach Clip to secure
part of your outer
garment or LifeHandle
Sling, and ensure the
material can support
the beverage weight.
ATTACHING CONTAINER:
12
3
4
DRINK HOLDER
Assembled view