Magic Chef MCSCWD27S5 User manual

1
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING YOUR
COMBO WASHER AND DRYER AND KEEP IT FOR FUTURE REFERENCE.
Model MCSCWD27W5 / MCSCWD27S5 / MCSFLW27W / MCSFLW27S /
24” Combo Washer and Dryer
24” Front Load Washer
User’s Manual
MCSCWD27G5

2
PRODUCT REGISTRATION
Thank you for purchasing a Magic Chef®product. The first step to protect your new product is to complete the product
registration on our website: www.mcappliance.com/register. The benefits of registering your product include the following:
1. Registering your product will allow us to contact you regarding a safety notification or product update.
2. Registering your product will allow for more efficient warranty service processing when warranty service is required.
3. Registering your product could act as your proof of purchase in the event of insurance loss.
Once again, thank you for purchasing a Magic Chef product.

3
CONTENTS
PRODUCT REGISTRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
INSTALLATION INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
BEFORE USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
OPERATION INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
WASH CYCLE PARAMETERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
CARE AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

4
IMPORTANT SAFETY INSTRUCTIONS
This manual contains Safety Instructions, Installation and Operating Instructions, and Troubleshooting Tips. Please
carefully read this manual before using your washing machine for instructions on how to use and maintain the
product properly. Be sure to follow the safety instructions to avoid injury or damage to the product.
Keep this manual. When passing on/selling the device to a third party, the manual must be handed over along
with the device.
Before calling for service, please make sure unit is installed and being used correctly, and read thetroubleshooting
section.
WARNING: When using your appliance, follow the precautions listed below.
NOTE: Specifications may change at any time without notice.
State of California Proposition 65 Warnings
WARNING: The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of
California to publish a list of substances known to the State of California to cause cancer, birth defects, or other
reproductive harm, and requires business to warn of potential exposure to such substances. This product contains
a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. This
appliance can cause low-level exposure to some of the substances listed, including benzene, formaldehyde, and
carbon monoxide.
1. Read all instructions before using this product.
2. This appliance is for household use only. It is not intended for commercial applications.
3. The appliance is intended for indoor use only. DO NOT use outdoors.
4. DO NOT use this appliance for other than its intended purpose.
5. Use only detergents or softeners recommended for use in this manual and keep them out of the reach of
children.
6. This machine is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they are given supervision or instruction
concerning the use of the washer by a person responsible for their safety.
7. This appliance must beproperly installed in accordance with the installation instructions before it is to beused.
8. DO NOT unplug your appliance by pulling on its power cord. Always grasp the plug firmly and pull it
straight out from the outlet.
9. Do not operate any appliance that has a damaged cord or plug, if it is damaged or malfunctions in any way,
or if the outlet is not in proper working order. Contact customer service or a service technician.
10. ALWAYS turn off and unplug from outlet before servicing, changing accessories or cleaning the unit. Allow
unit to cool down completely before cleaning, moving or servicing. Turning the unit off does not disconnect
it from the power source.
11. DO NOT put anything flammable or explosive in, on, or near the appliance. DO NOT wash or dry articles
of clothing or any items that have been soaked in flammable or explosive chemicals. To reduce the risk
of fire, clothes, cleaning rags, mop heads and the like which have traces of any flammable substance, such
as cooking oils, petroleum based oils or distillates, waxes, fats, etc., must not be placed in the washing
machine. These items may contain flammable substances which, even after washing, may smoke or catch
fire. DO NOT dry articles containing foam rubber or similarly textured rubber like materials.
12. ALWAYS wait for the washer tub to completely stop moving before reaching in to add or remove any clothes.
13. The loading door must be closed when the tub is spinning.

5
14. DO NOT operate this washer unless all enclosure panels are properly installed.
15. DO NOT tamper with or modify the controls.
16. WARNING: Risk of child entrapment. DO NOT allow children to play on or in the appliance. Close
supervision of children is necessary when the appliance is used around them.
17. The appliance must be plugged into a properly installed and grounded outlet that meets the voltage
requirements listed on the ratings label.
18. CAUTION: The power cord is equipped with a 3-prong grounding plug to protect against shock hazards.
ALWAYS plug the cord into a properly installed and grounded 3-prong wall receptacle, and DO NOT remove
the grounding prong.
19. Under certain conditions, hydrogen gas may be produced in a household hot water system that has not
been used for two weeks or more. Hydrogen gas is highly explosive. If the hot water system has not been
used for more than two weeks, turn on all hot water faucets and let the water flow for several minutes
prior to using your compact washer.
20. DO NOT modify or repair the unit by yourself. Contact customer service or a qualified service technician if
service is required.
21. To reduce the risk of electric shock or fire, do not use an extension cord or outlet adapters to connect the
unit to an electrical power source. The appliance must be properly grounded using a three-prong electric
receptacle wall outlet.
22. DO NOT install the washing machine in a moist or wet area, or where it can get wet or exposed to outside
weather conditions. DO NOT spray with water when cleaning.
23. DO NOT put children on top of, or allow children or pets to climb in or on, the washer. ALWAYS check
inside before using.
24. Glass door may be very hot during the operation. Keep children and pets away from the washer while in use.
25. Regularly clean the power plug to remove dust and dirt, in order to prevent electrical failure.
26. It is recommended to unplug the unit when it is not in use.
27. ALWAYS be sure to properly and securely connect the power cord to the outlet, and the water hoses to
prevent leakage or electrical shock.
28. DO NOT operate the unit or handle the plug with wet hands.
29. The water temperature to the washing machine should not exceed 131 °F (55 °C).
30. DO NOT wash raincoats, heavy jackets, or similar, heavy items.
31. DO NOT machine wash fiberglass materials (such as curtains and window coverings that use fiberglass
materials.) Small particles may remain in the washing machine and stick to fabrics in subsequent wash loads
causing skin irritation.
32. When removing from service and discarding, be sure to removethe door from the unit and cut thepowercord.
33. DO NOT reach into the wash tub when the agitator is moving.
34. CAUTION: Content may be HOT when washing and/or drying cycle is completed.
READ AND FOLLOW THIS
SAFETY INFORMATION CAREFULLY
SAVE THESE INSTRUCTIONS

6
SPECIFICATIONS
Height 33.5” (850 mm)
Width 23.5” (595 mm)
Depth 23.5” (595 mm)
Depth with Door Opened 42.5” (1080 mm)
Weight 160.9 lbs. (73.0 kg)
Voltage / Frequency AC 120V~60Hz
Rated Current 11.0A
Max. Washing Capacity 26.4 lbs. (12.0 kg)
Max. Dry Capacity (For MCSCWD27W5/MCSCWD27S5/MCSCWD27G5 only) 17.6 lbs. (8.0 kg)
Drum Size 2.7 cu. ft.
Figure 1
33.5”
(850 mm)
23.5” (595 mm)
23.5” (595 mm)
42.5” (1080 mm)

7
INSTALLATION INSTRUCTIONS
1. The washing machine must be properly grounded. In the event of a short circuit, grounding can reduce the
danger of electrical shock.
2. Washing machineshould be operated in a circuit separate from other electrical appliances.
INCLUDED PARTS
Before starting installation, make sure all included parts are
in thepackage inside thedrum.
INSTALLATION REQUIREMENTS
ELECTRICAL REQUIREMENTS
1. A 120v, 60Hz, AC 15-or 20amp, fused electrical supply
is required. A time-delay fuse or circuit serving only this appliance should beused.
2. This washer is equipped with a power supply cord having a 3 prong grounding plug.
3. To minimizepossibleshock hazard, the cord must be plugged into a 3 prong outlet, properly grounded in
accordance with local codes and ordinances. If a proper outlet is not available, it is the responsibility of the
customer to have the properly grounded outlet installed by a qualified electrician.
4. If codes permit and a separate ground wire to be used, it is recommended that a qualified electrician
determine the proper ground path.
5. DO NOT ground to a gas pipe.
6. Check with a qualified electrician if you are not sure the washer is properly grounded.
7. DO NOT have a fuse in the neutral or ground circuit.
8. Certain internal parts are intentionally not grounded and may present a risk of electric shock only during
servicing. Service Personnel – Do not contact the following parts whilethe appliance is energized: Drain
Pump, Door Lock, Drying Heater (Combo), Fan Motor (Combo).
LOCATION REQUIREMENTS
Selecting theproper location for your washer improves performance and minimizes noise and possible washer
“walk.” The washer can be installed under a custom counter or in a basement, laundry room, closet, or recessed area.
You will need:
• A water heater set for 120° F (49° C).
• A grounded electrical outlet located within 6 ft.( 1.8 m)of where thepower cord is attached to the back of
the washer.
• Hot and cold water faucets located within 4 ft. (1.2 m)of the hot and cold water fill valves ,and water
pressure of 20 - 100 psi (137.9 - 689.6 kPa).
• A level floor with a maximumslope of 1” (25 mm) under entire washer. Installing the washer on soft floor
surfaces, such as carpets or surfaces with foam backing.is not recommended.
• A sturdy and solid floor to support the washer with a total weight (water and load) of 200lbs.
• Do not operate your washer in temperatures below 32° F (0° C). Some water can remain in the washer and can
cause damage in low temperatures.
Water Hoses (2) Cable Tie
Transport
Hole Plugs (4)
Figure 2

8
• Thelocation must belarge enough to allow the washer door to be fully opened. The door opens more than
90°, and is not reversible.
• Additional spacing should be considered for ease of installation and servicing.
• Minimum spacing of 1” (25 mm) on all sides of the washer is recommended to reduce noise transfer.
• Additional clearances might be required for wall, door, and floor moldings.
• Spacing for companion appliance should also be considered.
Figure 3
Figure 4
INSTALLATION
CAUTION: Packing materials may be dangerous to children.
Please dispose them properly and DONOT let children play with
any packing materials.
Before using this washing machine, transport bolts must be
removed from the backside of this machine. Please take the
following steps to remove the bolts:
1. Loosen all bolts and then remove them.
2. Insert the transport hole plugs into the holes.
3. Keep thetransport bolts for future use.
Make sure that thesmall foam triangleis removed withthebottom
foam piece. If not, carefully lay the unit down and removeit.
When you unpack your washing machine, check if there is any
damage or missing pieces. If any items missing, please contact
customer service.
LEVELINGTHE WASHER
1. When positioning the washing machine, make sure the
legs are screwed in close to the cabinet. If not, turn them
to their original positions by hand or with a wrench and
tighten the nuts with a wrench.
2. After positioning the washing machine, push on all four
corners at the top of washing machine. If the washing
machinehas any wobble, or is not stable when being
pressed, adjust theleg to level the machine.
3. To level the unit, loosen thelock nut with a wrench and
turn the leg by hand until it tightly contacts with the floor.
Press theleg with one hand and tighten thelocking nut
close to the cabinet with the other hand.
4. Repeat steps 2 and 3 as needed.
5. Use a bubble level to check front to back, side to side, and
corner to opposite corner to ensure the washing machine
is level. Repeat above steps if needed.
Figure 5
Figure 6

9
DRAIN SYSTEM
STANDPIPEDRAIN SYSTEM
- WALL OR FLOOR
2” (5 cm)
Figure 7 Figure 8
The standpipe drain requires a
minimum diameter standpipe of 2”
(5 cm). The minimum carry-away
capacity can be no less than 17 gal.
(64 L) per minute. The top of the
standpipe must be at least 24” (60
cm) high and no higher than 39”
(100 cm) from the bottom of the
washer.
INSTALL INLET PIPE
Connect the end of the water inlet hose with the90°
elbow to the back of the washing machine and turn
clockwise to tighten. Note the position of the Hot and
Cold water inlets.
Connect the other end of the water inlet hose to the
appropriate Hot and Cold water tap. Tighten by turning
clockwise, and turn on the water valve to check for leaks
.
If any leaks are found, verify all connections are tight and
washers are present, and repeat the procedure.
LAUNDRY TUB DRAIN SYSTEM
The laundry tub needs a minimum 20 gal. (76 L) capacity.
The top of the laundry tub must be at least 60cm above
the foor.
FLOOR DRAIN SYSTEM
The floor drain system requires a siphon break that
may be purchased separately. The siphon break must
be a minimum of 28” ( 71 cm) from the bottom of
the washer.
Additional
hoses might
be needed.
Figure 9 Figure 10
min. 24”
(61 cm)
max. 39”
(100 cm)
min. 24”
(60 cm)
max. 39”
(100 cm)
min. 28”
(71 cm)
Figure 11
Figure 12
Hot
Connector to water inlet is a 90° bend.
Cold
NOTE: Images are for reference only.

10
BEFORE USE
CHECK LIST AND PREPARATION BEFORE WASHING
Read all instructions carefully to avoid any damage or issues with the washing machine and to clothes. ALWAYS
follow instructions on fabric care labels on clothing articles for proper care.
WARNING: DO NOT leave items to be washed in the washing machine for long periods of time. Items left in the
machine may get moldy and get spots. Clothes may also become discolored if they are not washed according to the
stated washing temperature and instructions.
SELECTINGDETERGENT
• Low foaming powdered detergent is recommended for use with the washing machine.
• Some detergents may not completely dissolve if there is too much detergent or if the water temperature is
too low.
• Bleach can damage clothes. Use bleach with caution and follow detergent and clothing article care
instructions.
Washing method is based on weight of clothes, soil level, local water hardness as well as the recommendations
from the detergent manufacturers.
NOTE: DONOT place or store laundry products, such as detergent, bleach, or liquid fabric softener, on top of
your washer/dryer combounit. Wipeup any spills immediately. These products can damage thefinish and controls.
Keep all laundry products in a safe, dry space out of reach of children.
SEPARATE CLOTHES TO BE WASHED
Classify clothes to be washed into cottons, blended fibers, synthetic fibers, silks, wools, etc. Light and dark clothes
should also be separated.
NOTE:New, colored fabrics should be washed separately.
• Accessories: Loose accessories on some clothes may become damaged and/or damage the washing machine.
Clothes that contain buttons or embroideries should be turned inside-out before being washed.
• Fasteners: Zippers must be closed and buttons or hooks must be firmly affixed. Any loosebands or ribbons
should be tied together before being washed.
• Water-proof materials: It is not recommended to wash water-proof fabrics as they may become damaged
and/or cause damage to the washing machine and other items being washed.
REMOVE ALL LOOSE OBJECTS FROM CLOTHES
Check all pockets/compartments of clothes to be washed and remove any loose items such as coins. Looseitems
may damage the washing machine.
BALANCING THE LOAD
Washing large, heavy garments, such as towels, jeans, jackets etc., may cause an unbalanced load. It is suggested to
add one or two more items to balance the load to allow smooth and complete draining.