Magnasonic PP72 User manual

User Manual
Wi Mini Projector
PP72
magnasonic.com/support
Thank you for your purchase of this Magnasonic product. Please read this
instruction manual carefully before using product to ensure proper use.
Keep this manual in a safe place for future reference.

- 2 -
CAUTION ............................................................................................................. 3
IMPORTANT SAFETY INSTRUCTIONS ....................................................... 3
FCC INFORMATION ......................................................................................... 5
LOCATION OF PARTS AND CONTROLS ................................................. 6
SPECIFICATIONS ............................................................................................... 7
PROJECTOR COMPATIBILITY ...................................................................... 8
OPERATING THE PROJECTOR....................................................................... 9
CHARGING WITH THE PROJECTOR .........................................................12
TROUBLESHOOTING .....................................................................................13
WARRANTY.......................................................................................................14
CONTENTS

- 3 -
All of the safety and operating instructions should be read, adhered to,
and followed before the unit is used. Please save these instructions.
DANGER
To reduce the risk of electric shock, burns, re or injury:
1. Do not use while bathing or in a shower.
2. Do not place or store unit where it can fall or be pulled into a tub or sink.
3. Do not place in, drop, or submerge into water or other liquids.
4. Do not reach for a unit that has fallen into water. Unplug it immediately.
5. Care should be taken so that objects and liquids are not dropped or spilled
onto the unit.
6. Close supervision is necessary when this appliance product is used by
or near children.
7. Use this unit only for its intended use as described in this manual.
8. Unplug this unit during lightning storms or when unused for long periods
of time.
9. Never drop or insert an object into any opening.
10. Protect the adapter cord from being walked on or pinched, particularly at
plug outlets, and the point where it exits the unit.
CAUTION
The lightning ash with arrowhead symbol within an equilat-
eral triangle is intended to alert the user to the presence of
uninsulated dangerous voltage within the product’s enclosure
that may be of sufcient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intend-
ed to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS

- 4 -
11. Do not allow adapter cord to touch hot surfaces. Wrap cord loosely
around the unit when storing.
12. The unit should be situated away from direct sunlight or heat sources such
as radiators, electric heaters, heat registers, stoves, or other units (including
ampliers) that produce heat. Avoid placing on top of stereo equipment
that radiates heat.
13. Never block the air openings of the unit with materials such as clothing,
plastic bags, or papers. Never place it on a soft surface such as a bed or
couch where openings may be blocked.
14. Do not overload electrical outlets. Use only the power source as indicated.
15. Do not carry this unit by the cord or use the cord as a handle.
16. Never operate this unit if it has a damaged cord or plug, if it is not working
properly, or if it has been dropped or damaged. If the unit’s power supply
cord or plug is damaged, do not attempt to x it yourself.
17. To avoid the risk of electric shock, do not disassemble or attempt to repair
the unit. Incorrect repair can cause risk of electric shock or injury to
persons when unit is used.
18. Do not operate in the presence of explosive and/or ammable fumes.
19. Never remove the plug from the socket by pulling the power cord.
WARNING! This product contains a rechargeable battery.
• Do not store this product in high temperatures, damp areas, or in direct
sunlight.
• Never disassemble the product.
• Never dispose of the product in re or water, which may result in explosion
and/or injury.
• Keep product out of reach of children. Do not touch product with damp
hands.
• Dispose of the product properly.
• The product must not be discarded with ordinary household waste.
• Contact your local recycling center for proper disposal.

- 5 -
FCC INFORMATION
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received including interference
that may cause undesired operation.
WARNING: Changes or modications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to operate
the equipment.
CAUTION: To maintain compliance with the FCC’s RF exposure guidelines,
place the product at least 8 inches from nearby persons.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This unit generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may cause
harmful interference to try and correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the reciever is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the
Class B FCC limits.
CAUTION: The radiated output power of the Wi-Fi technology is below the
FCC radio frequency exposure limits. Nevertheless, it is advised to use the
wireless equipment in such a manner that the potential for human contact during
normal operation is minimized.

- 6 -
LOCATION OF PARTS AND CONTROLS
1. Focus wheel
2. Battery indicator lights
3. Volume up control
4. Volume down control
5. Mode control
6. 3.5mm audio out
7. USB out (5V/1A)
8. Reset button
9. HDMI compatible Input
10. DC input (12V/2A)
11. Ambient light sensor
12. Lens
13. Tripod dock
14. Power button
11 12
14
13
1
2
3
4
5
6789 10

- 7 -
SPECIFICATIONS
Product Dimensions 4.1 x 4.1 x 4.0 inches
Brightness Up to 100 Lumens*
Lamp Life LED lamp with up to 20,000
hours
Image Size Up to 80 inches
Distance 3 feet to 10 feet
Throw Ratio 1.3
Contrast Ratio 1000:1*
Native Resolution 854 x 480 (WVGA)
Aspect Ratio 16:9
Built-in Speaker 2 x 1-watt speakers
Power DC 12V/2A
Auto Keystone +/- 40 degrees auto vertical
keystone correction
Battery Li-polymer, 3800 mAh
Battery Life Up to 1.5 hours**
*TI’s DLP® IntelliBright™ technology dynamically adjusts the projector brightness range for
each individual pixel based on image content and ambient room light level.
**Battery life will be reduced when using wireless mode.

- 8 -
PROJECTOR COMPATIBILITY
Compatible
Device
Wireless
Connection Examples Wired Connection Examples
Android™
Devices
Devices that have
Android™ OS 4.4
or later and wireless
screen mirroring
capability
Samsung Galaxy
S® 6, Samsung
Galaxy Note®
4, Samsung
Galaxy Note® 3,
Samsung Galaxy
S® 5, Samsung
Galaxy S® 4,
Nexus 6P, HTC
One A9, Huawei
G8, LG G4
Not available Not applicable
Apple® Devices Not available Not applicable
HDMI™ to HDMI™
cable (included) +
Apple® lightning™
digital AV adapter
(not included)
iPhone® 6 Plus, iPhone® 6, iPhone® 5,
iPod® touch 4th gen, iPad® mini 1st gen,
iPad® 4th gen
HDMI™ to HDMI™
cable (included) +
Apple® 30-pin digital
AV adapter (not
included)
iPhone® 4s, iPad® 3rd gen,
iPad® 2nd gen, iPhone® 4,
iPod® touch 2nd gen,
iPad®1st gen
HDMI™ to HDMI™
cable (included) +
Mini DisplayPort to
HDMI™ Adapter (not
included)
Macbook Air®, MacBook Pro®, iMac®
HDMI™
compatible
devices
Not available Not applicable
HDMI™ to
HDMI™cable
(included)
Devices with standard HDMI™ ports -
DVD/Blu Ray players, games consoles,
laptops with HDMI™ port, computers,
Apple®TV, Roku®, U-verse®
HDMI™ to HDMI™
cable (included) +
mini HDMI™ adapter
(not included)
Laptops with mini HDMI™ ports,
GoPro®
HDMI™ to HDMI™
cable (included)
+ micro HDMI™
adapter (included)
Laptops with micro HDMI™ ports,
Asus® VivoTab, Sony Vaio T®, Acer®
Aspire S7, Lenovo® Twist, Toshiba®
U845W, Acer® Aspire v5, Blackberry®
Z10
None Required
Google™ Chromecast, Roku® stick,
other streaming media players that plug
directly into an HDMI™ port
Apple, iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other
countries. Samsung is a trademark of Samsung Electronics, registered in the U.S. and other countries.

- 9 -
OPERATING THE PROJECTOR
SETUP
The projector can be powered using the included AC adapter or the
built-in battery.
• To power the projector with AC power, connect the AC adapter
to the projector’s DC input and plug the other end into an outlet.
Once connected, the battery indicator lights will illuminate on the
projector showing the amount of battery power remaining.
• To power the projector with the built-in battery, simply turn the
projector on. To check the remaining battery life of the projector
press the power button briey.
IMPORTANT: Fully charge the battery before rst use (approx. 4-5 hours).
CONNECT A SOURCE DEVICE
The projector can be connected to a variety of HDMI compatible
devices via a wired connection and to some smartphones and tablets
via a wireless connection.
IMPORTANT:
Before you power on the projector, please be sure to check that
there is nothing blocking the ambient light sensor on the front of the
projector (the location of this sensor can be seen on the Location
and Parts diagram). Blocking this sensor may impact the Intellibright
adjustments the projector makes which optimizes the projected image.

- 10 -
WIRED CONNECTION
1. To connect via a wired connection, plug in the HDMI compatible
cable (included in the box) to the HDMI compatible port on the
projector and to your device.
NOTE : Some devices may require an adapter to connect to your device. To determine what type of
adapter you need to use, please reference the compatibility section of this manual on page 8.
2. Power on the projector by pressing and holding the power button
for 3 seconds.
3. Allow the projector 15 to 30 seconds to fully start up, sync with
your device, and make image adjustments.
NOTE : After syncing with the projector, you may see your device’s screen being mirrored by the
projector. Some devices may not have this ability, but they can still be used with the projector to project
videos and photo slide shows.
4. Choose the media you would like to view from the menu on your
device and play as you normally would.
WIRELESS CONNECTION
1. To connect wirelessly, power the projector on by pressing and
holding the power button for 3 seconds.
2. Allow the projector 15 to 30 seconds to fully start up. The
projector will automatically start in wired mode.
3. Change the projector to wireless mode by pressing the mode
button. On screen, the projector will display wireless information
on how to connect your Android device.