Manhattan Comfort Rockefeller 1.0 Bookcase User manual

Rockefeller
888-230-2225
[email protected]
319 Ridge Rd. Dayton, NJ 08810, New Jersey - United States
1.0 Bookcase

Included in the package
01
02
03
Base
Top
Lateral
01
01
02
01
01
01
Part Description Qty Box
1x
Hardware
Tools needed (not included)
Rockefeller 1.0 Bookcase
04 Shelf 03 01
05 Rear Panel 01 01
02/07
12 Feet 04 01
05
02
03
03
04
04
04
01
12
A = 16x
B = 12x C = 08x D = 08x
H = 01x
E = 08x
G = 34x
F = 02x I = 01x J = 01x K = 08x

01
Connect the part (12) onto the part (01) with the hardware (A).
54.33"
A = 16x
03/07
Rockefeller 1.0 Bookcase
11 lb
11 lb
11 lb
11 lb
11 lb
21.26"
11.53"
11.42"11.42"11.42"11.42"
19.88"
A
01
12

02
03
K = 08x
Connect the parts (03) onto the parts (01 and 02) using the hardware (C + D + E). Apply the hardware (K)
on the hardware (E).
Connect the parts (04) onto the parts (03) with the hardware (B).
B = 12x
04/07
Rockefeller 1.0 Bookcase
E = 08xD = 08xC = 08x
03
03
01
02
D
C
D
E
K
C
C
C
D
D
K
E
E
K
K
K
K
K
E
E
E
EC
C
C
D
D
D
B
BB
BB
B
B
B
B
B
B
B
03
03
04
04
04

04
Connect the part (05) using the hardware (G).
G = 34x
05/07
Rockefeller 1.0 Bookcase
05
G

06
06/07
Rockefeller 1.0 Bookcase
wall
First, approach as close
as possible to the wall
Then, pass the hardware (J)
through the hole of the
part (05) as shown in the figure above.
You will need a pencil to mark where you
should drill the wall with a 3/8" drill bit
to put in the hardware (I).
J
*press the hardware wings (I) to put in the hole that
you drilled in the wall.
I
wings
wings
Hardware (I), plugged in the wall.
I
J
F
Then fasten with the hardware (F) the
hardware (J) on the part (02)
H
F
Attention! Tipover System
H = 01x J = 01xI = 01xF = 02x
05
02
Connect the hardware (J) onto the wall
with the hardware (H).