MD Health U60CH User manual

ti !P
FE;I
Model: U60CH
. Large LCD display
.2x90memory
. IHB indicator
. WHO indicator

Table of Contents

lntrod uction
Thank you for c-'c^as -; ::e Itt-s: 3, 3,:: t-:ss.re
Monitor. Please read i-e -a--a c€-9'- I :e':-e you
use the unit, and keep ire 'ra-!a rre a'-e. -s -!.
The unit is compact and easy to use, adopts tne
oscillometric principle. lt measures your blood pressure
and pulse rate simply and quickly. The device uses its
advanced "lntellisense" for comfortable controlled
inflation without the need of pressure presetting or
reinflation. This unit is only applied for the adult.
2x90 sets memoryfunction, each measurement resultwill
be displayed on the screen, and automatically stored .This
unit has blood classification index. could easy to check
your blood pressure.
Safety lnformation
I To assure the correct use of the product, basic
safety measures should always be followed including
the warning and the caution listed in the instruction
manual :
The following symbols may appear in this manual, on the label,
on the device, or on it's accessories. Some of the symbols
represent standards and compliances associated with the device
and its use.
l\ WARNING:This alert identifies hazards that may cause
serious Personal injurY or death'
A CRUT tOru: This alert identifies hazards that may cause
minor personal iniury, product damage, or
ProPerty damage"
4t41

lnformation
*
I
SN
lElEl Authorized Representative in tre European Community
( 6 * CE Mark: conforms to essential requirements of the
Medical Device Directive 93t 421EEC.
Y DISPOSAL: Do not dispose this product as unsorted
3 municipat waste. Collection of such waste separately
for special treatment is necessary.
::: Direct current
ffi operatinginstructions
g Follow instructions for use
A CAUTION: Consult accompanying documents
Safety lnformation
I Those who have arrhythmia, diabetes, blood circulation
or apoplexy problem, please use under the physician' s
i nstru cti o n.
I Contact your physician for specific information about
your blood pressure. Self diagnosis and treatment which use
measured results may be dangerous Follow the instructions
of your physician or licensed healthcare provider.
;f Please place on a high place where children can' t be
touched.
A No modification of this equipment is allowed.
I Oo not modify this equipment without authorization of the
manufacturer.
I tttnis equipment is modified, appropriate inspection and
testing must be conducted to ensure continued safe use of
equipment.
I The swallowing of small part like packaging bag, batlery,
battery cover and so on may cause the suffocation.
Type B applied pdt
Manufacturer
Speci{ies serial number
5141 6t41

E- ,*"o tnfornrdion
-
2\ Please don't use a ffrlirn 4e1il. at@hol or pctrol to cl e a n
the unit. Please dolr't hat lrear*y ilH dout the product from a
high place. Use the right anfi, drerrise it can not work.
;t\ Never leave any lou battery iO fiE baftery compartment
since they may leak and cause damage to the unit.
A Please take off the,battery if you won't use in 3 months.
2\ Replace the new batteries if the unit display a low battery
symbol.
A Do not mix the old and new batteries.
I Do not use a cellular phone near the unit. lt may result in
operational failure.
I Please avoid using in high radiant area in order to make
your measuring data correctly.
,zi\ Do not use the equipment where flammable gas (such as
anesthetic gas, oxygen or hydrogen) orflammable liquid (such
as alcohol) are present. Ztll
X
Safety lnformation
/h, weRtilrue :
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact you local government for information regarding
the collection systems available. lf electrical appliances
are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into
the food chain, damaging your health and well-being.
Classification
L lnternally powered equipment;
2. Type B applied part;
3. Protection against ingress of water: lPXO;
4. Not category AP / APG equiFiment; '
5. Mode of operation: Continuous operation ;
/lThe user must check that the equipment functions safely and
see that it is in proper working condition before being used.
8141

Product structure Each of Component
(- u"it_l
MEMORY button
Battery cover -
t6&!Atl
LCD Display
SET button
START/STOP button
(Note: the cuff is treated
as the applied part. )
Year/Month,/Date/Time
Systolic blood pressure
Diastolic blood pressure
Pulse rate
Pulse
t.F@r:.=@m
€>
W
II
{EIGil]loptiony
1.5X2AAA
alkaline batteries
Please read the warranty information in the end of the manual
ca refu I ly.
Blood
classification
Memory
Memory tim
lrregular heart beat
9t41 10141
Low battery

I Battery installation and replacenren
1. Push the hook oo the bottom
of the battery cover as picture.
2. lnsert two 1. 5V "AAA" batteries
in the battery compartment.
I Ptace the batteries "+" and',-"in
the right position as indicated.
3.Pull the battery cover to the main unit.
A, Wn"n the battery cover close
tightly, could hear "Ka-ka".
Battery installation
Low battery and replacement
When power on, the low battery symbol t'-----.] will display once
the unit start to work, and you must replace with new batteries,
otherwise the unit can't work.
Please use 2pcsAAA identical 1.5V alkaline batteries.
Do not use the batteries beyond their expiry date.
Please remove the batteries if you do not need to use for long
time.
A wenrutruo:
Dispose of the battery in accordance with all federal, state and
focal laws. To avoid fire and explosion hazard, do not burn or
incinerate the battery.
11t41 12t41

Continue to above step, the screen win display
xMuD and XX:XX, and keep flashing onthe
digits of hour, the digit will increase 1 when
press button M each time, you could choose
from 0 to 23. Press button S when you confirm
the hour, then the digits of minute start to flash
, same as the hour setting , each time you
press button M ,the digits will keep changing
from OO to 59. Press button S when you confirm
the minute, then the total setting is completed.
Proper use of the unit
I Before the measurement--
. Please keep quiet for 5-10 minutes,and avoid eating, drinking
alcohol,smoking,exercising and bathing before taking
measurement. All these factors will influence the measurement
result.
. Remove watch or other ornaments from the measured wrist'
. Always measure on the same wrist(normally left).
. Take measurement regularly at the same time of every day, as
blood pressure changes even during the day.
I Common factors of wrong measurement--
. Please measure under the same circumstance if compare the
blood pressure by different way,especially measure in a quiet
environment.
. Make sure you are in a comfortable,relax position and do not
activate any of the muscles in the measurement arm during the
measurement.
. lf put the wrist lower or higher than the heart,a false reading will
be obtained. 16141
15141

Proper use of the unit
Note:
. A loose cuff or a exposed bladder causes false reading.
. With repeated measurements,blood accumulates in the wrist
which can lead to false reading.Consecutive blood pressure
measurements should be repeated after 1 minute pause orafter
the arm has been held up in order to allow the accumulated blood to
flow away.
Iritting
Proper use of the unit
1.Roll up sleeve. Make sure your sleeve is not .fff.
rolled up too tightly on your arm. This may / n-.\
constrict the flow of blood in your arm. ' / \N
2.Wrap the cuff directly against your skin,hold
the bottom part of the cuff and wrap it around
the wrist so it fits comfortably and securely
around your wrist as picture show.
3.Sit in a chair and take an erect -R 6
i.1'li,i3'11',i;iX1lr",$,";::lJ'"' ffi ffi
(s
Too hisher 5p;;r..o,nn, *"',,on
+&
4.Press the START/STOP button,the monitor
will measure your blood Pressure
automatically.Please keep still when the
monitor works.
lf it is not possible to fit the cuff to your left wrist,it can also be
placed on the right. However,all measurements should be made
using the same wrist.
17 t41 18t41

Proper use of the unit
IMeasuring procedure------- l
l.Press the START/STOP button, all symbols
appear on the display , then 0 flash for 2 seconds,
the pump begins to inflate the cuff, the rising
pressure in the cuff is shown on the display.
2.After the suitable pressure has been
reached,the pump stops and the pressure
gradually falls.The cuff pressure is displayed.ln
case that the inflation is not sufficient,the device
automatically re-inflates to a higher pressure.
3.When the device detects a pulse, the heart
symbol (t on the display starts to flash.
4.When the measurement has been completed,
the systolic,diastolic and pulse rate will appear on
the display.
5.The measurement readings remain on the
display untilyou switch off the device.lf no button
is pressed for a period of 3 minutes, the device
switches off itself in order to save the power.
Proper use of the unit
Note:The symbol ,lt will be displayed along with the reading if
the irregular heartbeat is detected during the measurement.
It will read in kPa as unit when you choose kPa.
lDiscontinuing a measurement
lf it is necessary to interrup a blood pressure measurement for any
reason(eg.the patient feels unwell)the START/STOP button can be
pressed tt any time.The device immediately decrease the cuff
pressure automaticallY.
IMemory-recall of measurements----------------
This blood pressure monitor automatically stores 2x90 sets
measurements value, the oldest record will be replaced by the
latest measurement value when more than 90 sets each user'
IRead memory record-----------
Press the M button when power off,the latest 3 times average value
will be shown, press the M button again to show the latest memory'
press the S button to show the oldest memory, as well as
iubsequent measurements can be shown one after the other by
pressing the M button or the S button each time'
19t41 20t41