METLAM ML 1800 WHT Manual

Metlam Australia Pty Ltd T: [phone] F: [phone] E: [email protected] www.metlam.com.au
1
The photographs and line drawings of the products presented above are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Information Sheet
TECHNICAL SPECIFICATIONS
Description:
Automatic Operation Hand Dryer
Casing:
3.0mm White High Grade Fire Retardant ABS
Brushless Motor:
1/8HP, 80W, 2850 R.P.M (50Hz), 3150 R.P.M (60Hz)
Designed with 105°C thermostat
Heater Assembly:
Designed with 87°C thermostat 1400-1700W
Designed with 141°C thermal cut off
Dryer shall deliver:
150 CFM (255m3/h)
Air Speed
36.9mi/hr (16.5m/s). –60Hz
32.4mi/hr (14.5m/s)—50Hz
Air Output Temperature
58°C. Ambient Temp 20°C
Sound Level
55±3 Db
Drying Time
30 –35 seconds
Adjustable Distance Sensor
51mm to 330mm
Power Cut Off
60 seconds
Drip Proof
IPX1
Isolation
Class 1
Weight
3.5kg Net Weight / 3.8kg Shipping Weight
Note:
This unit is accessible compliant when installed in
accordance with AS1428.1. guidelines.
ML_1800_WHT AUTO OPERATION HAND DRYER
OPERATING MANUAL

Metlam Australia Pty Ltd T: [phone] F: [phone] E: [email protected] www.metlam.com.au
2
The photographs and line drawings of the products presented above are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Information Sheet

Metlam Australia Pty Ltd T: [phone] F: [phone] E: [email protected] www.metlam.com.au
3
The photographs and line drawings of the products presented above are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Information Sheet

Metlam Australia Pty Ltd T: [phone] F: [phone] E: [email protected] www.metlam.com.au
4
The photographs and line drawings of the products presented above are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Information Sheet

Metlam Australia Pty Ltd T: [phone] F: [phone] E: [email protected] www.metlam.com.au
5
The photographs and line drawings of the products presented above are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Information Sheet

Metlam Australia Pty Ltd T: [phone] F: [phone] E: [email protected] www.metlam.com.au
6
The photographs and line drawings of the products presented above are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Information Sheet
Warranty
The product warranty is 5 years (3 years Parts and Labour plus 2 years parts only) from the date
of purchase. For more information, please contact Metlam Australia for a copy of our warranty
statement.
For service-related enquiries please email ser[email protected].au
The technical recommendations contained in this document are necessarily of a general nature and should not be relied on for specific applications
without first securing competent advice. Whilst Metlam Australia Pty Ltd has taken all reasonable steps to ensure the information contained herein
is accurate and current, it does not warrant the accuracy or completeness of the information and does not accept liability for errors or omissions.
Any Commercial product should only be installed by a competent tradesperson and serviced/maintained by knowledgeable janitorial staff or
competent people. Metlam Australia accepts no responsibility for any damage to product, walls or fixtures due to incorrect installation or
maintenance of any of their products.