MGA Entertainment Little Tikes GROWING GARDEN Wheelbarrow &... User manual

SKU: 656477
CONTENTS
AB1 B2
M
C x 2
D x 9 E x 3 F x 3 G x 6
H
I x 2
J
KL
A. 1 Wheelbarrow
B1. 1 Left Support Leg
B2. 1 Right Support Leg
C. 2 Handles
14
The Little Tikes Company makes fun, high quality toys. We warrant to the original purchaser that this product is
free of defects in materials or workmanship for one year * from the date of purchase (dated sales receipt is
required for proof of purchase). At the sole election of The Little Tikes Company, the only remedies available
under this warranty will be the replacement of the defective part or replacement of the product. This warranty
is valid only if the product has been assembled and maintained per the instructions. This warranty does not
cover abuse, accident, cosmetic issues such as fading or scratches from normal wear, or any other cause not
arising from defects in material and workmanship. *The warranty period is three (3) months for daycare or
commercial purchasers. U.S.A and Canada: For warranty service or replacement part information, please visit
our website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little Tikes
Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may be available for purchase
after warranty expires—contact us for details. Outside U.S.A and Canada: Contact place of purchase for
warranty service. This warranty gives you specic legal rights, and you may also have other rights, which vary
from country/state to country/state. Some countries/states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may not apply to you.
LIMITED WARRANTY
• ADULT ASSEMBLY REQUIRED.
• ADULT SUPERVISION REQUIRED.
• Prior to assembly, this package contains small parts: hardware which
is a choking hazard and may contain sharp edges and sharp points.
Keep away from children until assembled.
• An adult must assemble and check this product before use to
minimize risk of the unit tipping or falling.
• Check inserted and threaded connections regularly, and tighten
hardware as needed.
WARNING
D. 9 Small Nut
E. 3 Small Screw
F. 3 Small Washers
G. 6 Large Screws
H. 1 Large Nut
I. 2 Large Washers
J. 1 Large Bolt
K. 1 Bushing
L. 1 Wheel
M. 1 Shovel
ADULT ASSEMBLY AND SUPERVISION REQUIRED
Please keep this manual as it contains important information.
© The Little Tikes Company, an MGA Entertainment company.
LITTLE TIKES® is a trademark of Little Tikes in the U.S. and other
countries. All logos, names, characters, likenesses, images, slogans,
and packaging appearance are the property of Little Tikes.
Printed in China • 1020-0-E/INT www.littletikes.com
www.littletikes.co.uk
www.littletikes.com.au
MGA Entertainment (Netherlands) B.V.
Baronie 68-70, 2404 XG Alphen a/d Rijn,
The Netherlands
Tel: [phone]
Email: [email protected]
Little Tikes Consumer Service
2180 Barlow Road
Hudson, Ohio 44236 U.S.A.
1-800-321-0183
MGA Entertainment UK Ltd.
50 Presley Way, Crownhill, Milton
Keynes, MK8 0ES, Bucks, UK
[e-mail]
Tel: [phone]
Imported by MGA Entertainment
Australia Pty Ltd
Suite 2.02, 32 Delhi Road
Macquarie Park NSW 2113
1300 059 676
Illustrations are for reference only. Styles may vary from actual contents.
Please remove all packaging including tags, ties & tacking stitches before giving this product to a child.
Wheelbarrow Shovel
3
YEARS
REQUIRED TOOLS FOR ASSEMBLY
(NOT INCLUDED)
Phillips Screwdriver
2 Wrenches
TM
Place the Wheel (L) between the two Leg Supports
(B1, B2).
Insert one Bolt (J) through the Left Leg Support (B1). Then,
place one Large Washer (I) over the bolt. Slide the Bolt through
the Bushing (K) in the Center of the Wheel (L). Slide another
Large Washer (I) over the Bolt. Place the end of the Bolt through
the Right Leg Support (B2). Hold the Bolt with one wrench, and
secure the assembly with the Large Nut (H) using another
wrench.
9 10
A
L
B1 B2
C C
J
B1 I I B2
H
L
K
H. x 1 I. x 2 J. x 1
*Small Nuts (D) are attached to the Screws (E and G) and should be removed before assembly.
NOTE: Extra hardware included.

12
3 4
2 3
ASSEMBLY
Insert two Small Screws (E) into the openings on the
inside of the Wheelbarrow and through the openings
on the Leg Supports (B1, B2) and Handles (C).
Secure the Small Screws (E) on the underside of the
Wheelbarrow using two Small Nuts (D).
Remove the Large Nut (H), Bushing (K), and two
Large Washers (I) from the Large Bolt (J).
Position the Left Support Leg (B1) and Right Support
Leg (B2) under the Wheelbarrow (A) so that the
openings align with the lower openings on the
handles (C). The legs should bow outward.
CC
D D
AF, G
CC
A
E
G. x 2 F. x 2
D. x 2
E. x 2 D. x 2
A
B1 B2
C C
A
B1 B2
D
C C
5 6
Insert two Large Screws (G) into the openings on the
inside of the Wheelbarrow and through the
openings on the Leg Supports (B1, B2).
Secure the Large Screws (G) on the underside of the
Wheelbarrow using two Small Nuts (D).
CC
A
G
G. x 2 D. x 2
A
B1 B2
D
C C
78
K
H. x 1 I. x 2
J. x 1
Use a wrench (not included) to hold the nuts in place while
using a screwdriver (not included) to tighten the screws.
Insert the Bushing (K) in to the center opening of the wheel.
K
L
K
J I K H
Align the Handles (C) with the openings on the back of
the Wheelbarrow (A). Slide a Small Washer (F) onto both
Large Screws (G). Insert the screws into the openings on
the inside of the wheelbarrow and through the
openings on the Handles (C). Secure the screws on the
backside of the Handles using two Small Nuts (D).