Mirror Media MP 150M User manual

HD Projector MP150M

1
contents
Caution ...................................................................2
Warning! ..................................................................5
FCC Information...........................................................6
Location of Parts and Controls .............................................8
Specifications ............................................................10
Projector Compatibility ....................................................11
Apple®Devices............................................................... 12
Android™ Devices ............................................................ 14
Windows®Devices............................................................ 15
Streaming Devices............................................................ 16
Charging the Battery .....................................................17
Operating the Projector ...................................................18
Setup ........................................................................ 18
Powering Up and Viewing Media............................................... 19
Image Adjustments ........................................................... 20
Charging with the Projector ...............................................22
Troubleshooting ..........................................................23

2
caution
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER. THERE ARE NO SERVICEABLE PARTS INSIDE
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
The lightning flash with arrow-head symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the unit’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the unit.
imPortant safety instructions
All of the safety and operating instructions should be read, adhered to and
followed before the unit is operated.
save tHese instructions!

3
Danger
To reduce the risk of electric shock, burns, fire or injury:
1. Do not use while bathing or in a shower.
2. Do not place or store unit where it can fall or be pulled into a tub or sink.
3. Do not place in, drop or submerge in water or other liquid.
4. Do not reach for unit that has fallen into water. Unplug it immediately.
5. Care should be taken so that objects do not fall and liquids are not
spilled onto the unit.
Warning
1. Close supervision is necessary when this appliance/product is used by or
near children or mentally disabled individuals.
2. Use this unit only for its intended use as described in this manual.
3. Unplug this unit during lightning storms or when unused for long periods
of time.
4. Never drop or insert an object into any opening.
5. Protect the adapter cord from being walked on or pinched, particularly at
plug outlets, convenience receptacles and the point where it exits the unit.
6. Do not allow adapter cord to touch hot surfaces. Wrap cord loosely

4
around the unit when storing.
7. The unit should be situated away from direct sunlight or heat sources
such as radiators, electric heaters, heat registers, stoves, or other units
(including amplifiers) that produce heat. Avoid placing on top of stereo
equipment that radiates heat.
8. Never block the air openings of the unit with materials such as clothing,
plastic bags or papers, or place it on a soft surface such as a bed or
couch, where the air openings may be blocked.
9. Do not overload electrical outlet. Use only the power source
as indicated.
10. Do not carry this unit by cord or use cord as handle.
11. Never operate this unit if it has a damaged cord or plug, if it is not
working properly, or if it has been dropped or damaged, or dropped into
water. If the unit’s power supply cord or plug is damaged, do not attempt
to fix it yourself.
12. To avoid the risk of electric shock, do not disassemble or attempt to
repair the unit. Incorrect repair can cause risk of electric shock or injury to
persons when unit is used.
13. Do not operate in the presence of explosive and/or flammable fumes.
14. Never remove the plug from the socket by pulling the power cord.

5
Warning!
This producT conTains a rechargeable baTTery
•Do not store this product in high temperatures, damp areas, or in
direct sunlight.
•Never disassemble the product.
•Never dispose of the product in fire or water, which may result in
explosion and/or injury.
•Keep product out of reach of children.
•Do not touch product with damp hands.
•Dispose of the product properly.
•The product must not be discarded with ordinary household waste.
•Contact your local recycling center for proper disposal.

6
fcc information
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received including interference
that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment. Note: This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This unit generates,
uses, and can radiate radio frequency energy and if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will

7
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try and correct
the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the
Class B FCC limits.

8
Location of Parts anD controLs
1. Battery indicator lights
2. Focus wheel
3. Volume up control
4. Volume down control
5. Power button
6. 3.5mm Audio out
7. USB out (5V/1A)
8. Mode control
9. HDMI/MHL Input
10. DC input (12V/2A)
11. Reset Button
14
12 13
1
4
3
2
5
679 1110
8

9
Location of Parts anD controLs
12. Ambient light sensor
13. Lens
14. Tripod Dock
14
12 13
1
4
3
2
5
679 11108

10
sPecifications
Product Dimensions 3.2” x 5.2” x 1”
Brightness 200 Lumens*
Lamp Life LED lamp with up to 20,000 hours
Image Size Up to 100”
Distance 2ft to 10ft
Throw Ratio 1.66
Contrast Ratio 400:1*
Native Resolution 1280 x 720 (720p)
Aspect Ratio 16:9
Built-in Speaker 2 1-watt speakers
Power DC 12V/2A
Auto Keystone +/- 40 degrees vertical keystone correction
Battery Li-polymer, 6,000 mAh
*TI’s DLP® IntelliBright™ technology dynamically adjusts the projector brightness range for each individual
pixel based on image content and the ambient room light level.

11
Projector comPatibiLity
Included in the box
Purchase separately
cables and adapTers included in The box
AC Adapter HDMI®to HDMI Cable
5-to-11pin Adapter MHL Micro USB to HDMI Cable

12
apple®devices
iPhone®6
iPhone 6 Plus
iPhone 5s
iPhone 5c
iPhone 5
iPod touch®5
iPod touch 4
iPad Air
iPad®Mini
iPad 4
HDMI
Lightning™ Digital AV Adapter
HDMI to HDMI Cable
iPhone 4s
iPad 3
iPad 2
HDMI
30-Pin Digital AV Adapter
HDMI to HDMI Cable

13
MacBook Pro®with Retina
display
Mac Mini
Mac Pro HDMI to HDMI Cable
MacBook Air®
MackBook Pro
iMac®
Mini DisplayPort to HDMI Adapter
HDMI to HDMI Cable
Apple TV
HDMI to HDMI Cable

14
android™ devices
HTC®One®
MHL Micro USB to HDMI Cable
Samsung Galaxy Note®4
Samsung Galaxy Note®3
Samsung Galaxy S®5
Samsung Galaxy S®4 5-to-11pin Adapter
MHL Micro USB to HDMI Cable

15
WindoWs®devices
Surface™ Surface Adapter
HDMI to HDMI Cable
Apple, iPhone, iPad, iPod, iPod Touch, MacBook Pro, MacBook Air, iMAC and Lightning are trademarks of
Apple Inc., registered in the U.S. and other countries. Android, Chromecast and YouTube are trademarks
of Google Inc. Samsung, Galaxy, Galaxy S, and Note are trademarks of Samsung Electronics Co., Ltd. in
the United States or other countries. Motorola and ATRIX are trademarks of Motorola Trademark Holdings,
LLC. ASUS and VivoTab are registered trademarks of ASUSTeK Computer. Windows and Surface are
registered trademarks of Microsoft Corporation in the United States and other countries. DLP and the DLP
logo re trademarks of Texas Instruments. HDMI, the HDMI Logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Netflix is a registered trademark of Netflix. Hulu is a trademark of Hulu, LLC.

16
sTreaming devices
Roku®
Apple TV
Amazon Fire TV
U-verse®HDMI to HDMI Cable
Roku®Streaming Stick®None required - stick plugs directly into the
HDMI port on the projector
Google Chromecast
Amazon Fire TV Stick
None required - plugs directly into the HDMI
port on the projector
note: Both the Chromecast and the Amazon Fire TV Stick
require a power source. The USB power cable that comes
with both these units can be plugged into the USB Out port
on the projector or can be plugged into a wall outlet with the
power adapter.

17
cHarging tHe battery
1. The built-in battery is charged using the included AC adapter.
imPortant: Fully charge the battery before first use (approx. 4-5 hours).
2. The battery has 4 battery charge indicator lights. The lights will flash
in turn as the device charges. The battery is fully charged when all 4
lights are lit and no longer flash.
3. Check the battery life by briefing pushing the power button. The
indicator lights will illuminate indicating the amount of battery
remaining (for example, if 3 lights illuminate, there is approximately
75% of the battery life remaining).

18
oPerating tHe Projector
seTup
1. The projector can be powered using the included AC adapter or the built-
in battery.
• To power the projector with AC power, connect the AC adapter to the
projector’s DC input and plug the other end into an outlet. Once connected,
the battery indicator lights will illuminate on the projector showing the
amount of battery power remaining.
• To power the projector with the built-in battery, simply turn the projector on.
To check the remaining battery life of the projector press the power button
briefly.
imPortant: Fully charge the battery before first use (approx. 4-5 hours).
2. Connect the included HDMI cable to the HDMI port on the projector and
the other end to your device.
note: Some devices may require an adapter to connect to your device.
To determine what type of adapter you need to use, please reference the