Manual Guide Notes
Maintenance and Care
•Please read the following instructions carefully and use the product properly.
•Keep this manual for future assemblies or hand over when you transfer the
product.
•Check the product upon receiving and make sure there are no manufacturing
defects. All products go through Quality Control before packaging and transport.
•Please use the specified tools required for assembly.
•Avoid using any adhesives or additional parts during assembly.
•The wheels cannot move properly on surfaces like carpets.
•Please contact us if further information is needed.
•Clean the product with a dry soft cloth. Avoid cleaning the product with a hard
item or chemically unsuitable product.
•In case of using a mildly wet cloth, please make sure to dry the surfaces
immediately after cleaning.
•When disassembling the item, please make sure to use the same tools
required for assembly.
•In any case of rust on metal hardware, please use suitable rust-removers.
•If something is stuck on the surfaces, do not use abrasive tools to remove
them, as these could leave scratches or marks. Please use lint-free cloths or
sponges instead.
Warning
•The product contains small parts and sharp objects, please be careful during
assembly and keep children away.
•Keep plastic bags away from children in case of suffocation.
•Please make sure to keep the item away from extreme conditions (such as
high humidity, high temperatures, intense sunlight, excess water, etc.)
•Do not place any sharp objects or corrosive materials on the product to avoid
any damage.
•The product has a tested loading capacity for regular objects and a large
screen TV, but in any case, please do not place overweight objects, do not
stand on the product and keep children away from jumping on the product.
•The vendor does not take responsibility for any damage or injury caused by
improper assembly or use.
