Monitor Audio 300 series User manual

© Monitor Audio 2006
- 1 -
Pre-Construction Bracket Installation Instructions.
The following product is meant solely for the purpose described and the installation
should be carried out by qualified personnel only.
The Monitor Audio pre-construction brackets are designed with the professional
installers in mind. They will provide a quick and easy way of locating the desired
position of Monitor Audio Series 100, 200, 300 Custom Installation looudspeakers.
Joists
Wings
Pre-
Construction
Bracket
Staplewings
tojoists here

© Monitor Audio 2006
- 2 -
Preconstruction Bracket installations steps:
1. Decide location of speaker (s).
2. Clip fixing wings into place in convenient location around the polymer frame to
suit the joists.
NOTE: Ensure the clips of the wings are fixed securely. There should be no gap
around the outside of the wing where it joins the bracket. If there is a gap, this
is a sure sign oneof the clips is not in correctly.
3. Staple fixing wings to joists. Ensure the Monitor Audio and colour text on the
wings face away from you when fastening.
4. Cable tie/ zip tie the speaker cable to the loop provided inside the moulding.
This loop snaps off when installing speaker.
5. Fix plaster board/ dry wall.
6. Cut hole around the pre-construction bracket.
Alternative fixing arrangements are possible.