NexLink CARBON 15 Series User manual

QUICK START GUIDE This guide provides step-by-step instructions
for a quick setup of your notebook computer.
1Install the Battery Pack
Install the battery pack if it has not been installed in your computer.
•Carefully place the computer upside down.
•Make sure that the battery security lock is in the unlock ( ) position.
•Fit the battery pack into its compartment and slide the security lock to the
lock ( ) position.
3Power Up
•Open the top cover by lifting up the cover. •Press the power button to power
up. An operating system such as
Windows®should start.
2Connect AC Power
The first time you use your computer,
use the AC adapter. This will allow the
battery pack to fully charge.
•Plug the DC cord of the AC adapter
to the power connector on the
computer.
•Plug the female end of the AC power
cord into the AC adapter and the
male end into an electrical outlet.
The Battery Charge Indicator ( ) on
the computer glows red to indicate that
charging is in progress and lights green
when the battery is fully charged.
1
2
All manuals and user guides at all-guides.com
all-guides.com

NOTEBOOK FEATURES Congratulations and thank you for purchasing
this notebook computer.
34mm
ExpressCard®
Slot
Modem (RJ-11)
Connector
(optional)
USB 2.0 Port
DVI Port
USB 2.0 Port
SATA Optical
Disk Drive
Microphone
Connector
Audio Output
Connector
Battery
AC Power
Connector
USB 2.0
Port
USB 2.0
Port
Network
Connector
Camera
(optional)
Device Indicators
Keyboard
Power
Button
Bluetooth®
(optional)
Wireless LAN Activity
Number Lock
Caps Lock
HDD Activity
Sleep/Hibernate Mode
AC Power/Battery Charge
LCD
Microphone
(optional)
P/N: I48472
Quick Buttons
Internet
Wireless Radio
On/Off
Volume Down
Volume Up
Mute
Touchpad
Fingerprint Reader
(optional)
All manuals and user guides at all-guides.com