Nexvoo Breeze Starter User manual

Breeze Starter
User Manual
Please carefully read the instructions to use this product properly and safely.
뻛Version V1.0뻜

This manual and the information contained herein are provided for use as a maintenance and
operation guide. No license or rights to manufacture, produce, and/or sell either the manual or
articles described herein are given. Nexvoo Inc reserves the right to change the design and
specifications for improvement purposes without any notice. We recommend that all users read
and fully understand this manual before using the Breeze Starter.
All statements, technical information, and recommendations herein are based on tests we believe
to be reliable, but the accuracy or completeness thereof is not guaranteed; and the following is made
in lieu of all warranties, expressed or implied, including the implied warranties of merchantability
and fitness for purpose: Seller’s and Manufacturer’s only obligation shall be to replace such quantity
of the product proved to be defective. Before using, the user shall determine the suitability of the
product for intended use, and the user assumes all risk and liability whatsoever in connection
therewith. Neither Seller nor Manufacturer shall be liable either in tort or in contract for any loss or
damage — direct, incidental, or consequential — arising from the use of or the inability to use the
product. No statement or recommendation not contained herein shall have any force or effect
unless it is in an agreement signed by officers of the Seller and Manufacturer.
Important Notice
Breeze Starter has deep cleaning effect with 5-layer N99 filters which can improve filtration
efficiency. And it has 2 UV-C LED lights witch can kill the bacterial and virus on the filters.
Intended use
1

①Strap adjustment buckle
②Silicone band
③Outer cover of the filter
④Filter
⑤External clamp
⑥USB port
⑦UV-C LED light
⑧Internal clamp
⑨Silicone gel pad
1. Components
Product Overview
2
1
2
3
5
6
7
89
4

Clean the mask before use. The cleaning should be done using 70% isopropyl
alcohol wipes or cloth dipped in 70% alcohol. Clean the outer surface by swabbing
or wiping the surface with the alcohol wipes.
Do not use any other cleaning materials or chemicals.
Do not use a brush to clean, as it might scratch it.
Caution
2. Dimension
1. Clean the mask
This mask has the UV-C LED lights on both modules. When you use the USB cable
to connect the device to an electric power supply, the UV-C LED will automatically
turn on for a period of time to disinfect the filter.
2. UV Disinfection
Before Use
3
OO
뻛OO
뻛OO
When you unplug the USB cable, please cover the USB port with silicone cover to prevent air
leakage.
Caution

1. Wear the mask
How to Use
4
When using the product for the first time, always test first for compatibility with your
skin.
3. Pre-test on skin
Make sure to perform a pre-test in order to prevent skin problems from occurring.
If a rash, reddening, itch, stinging sensation, or other abnormality occurs at the pre-testing site,
please immediately stop the pre-test.
Do not use the product if a skin abnormality is perceived.
Warning
(1) Hold the mask in hand, place it upwards, and let the silicone bands hang downwards below hand.
(2) Adjust the mask to positions of your nose, cheeks and chin. Pull the lower silicone band to the
back of neck, below the ears and then pull the upper silicone band to the top back of your head .
You can use the strap adjustment buckles to adhere the mask to the face.
(3) Face fit check should be done. If leakage is detected in the rest of mask edge, adjust the
silicone bands again.

5
(1) Find the buckle of the filter cover which is near the USB charging port. Pull out the filter cover by
hand, and then the filter cover will automatically pop.
(2) Remove the old filter, and take the new filter and insert it properly.
(3) Put the filter cover until it clicks.
The filter is recommended to be replaced every 1~2 days.
Note
2. Replace the filter
The device has a distance sensing function. If the device is far away from your face when wearing,
the fan may not turn on automatically, you can also short press the switch button to turn it on.
Note

Technical Specifications
6
Product Name
Product Type
Suitable for
Product Size
Application
Accessories
Weight
Rated Voltage
Filter Level
Filter Shelf Life
Recommended Ambient Temperature
Breeze Starter
NM201
Adults
95 grams / 0.21 lbs
DC 5V
N99
2 years
10℃~40℃
7.28’’L x 4.13’’W x 4.21’’ H
185L x 105W x 107H mm
Non-medical
Personal protection
Charging USB cable (Micro-USB)*1
Filter Package*1
User manual*1

Maintenance and Inspection
7
In the following cases, the guarantee is not provided:
1. Unauthorized repair, misuse: strikes, negligence, wrong use, damage, alteration, misuse parts.
2. Excess warranty.
3. Force majeure, which resulted in damage to the product.
Caution
If you have not used the device for an extended period, inspect it carefully and check that the
device works properly and safely before use.
If the device malfunctions or appears damaged, please contact your local distributor.
.
.
Storage
Troubleshooting tips
Disposal
Store in a clean and dry, well-ventilated place out of the reach of children.
Remove the USB cable from the USB port when not in use for a long time and store them safely.
Do not leave in hot or humid places, such as near flame, in bright sunlight, or in a bathroom.
Please visit www.nexvooKHDOWKFDUH.HX for troubleshooting tips and access the diagnostic
tool to helptroubleshoot any issues you may have with your Breeze Starter.
.
.
.
Follow your local government rules for proper disposal of this product.