Nightowl stage lighting Par64-led User manual

Warrantee

One (1) Year Limited Warranty

Subject to the limitations set forth below, Nightowl Stage Lighting

hereby represents and warrants that the components of this product

shall be free from defects in workmanship and materials, including

implied warranties of merchantability or fitness for a particular purpose,

subject to normal use and service, for one (1) year the original owner

from the date of purchase.

Retailer and manufacturer shall not be liable for damages based upon

inconvenience, loss of use of product, loss of time, interrupted operation

or commercial loss or any other incidental or consequential damages

including but not limited to lost profits, downtime, goodwill, damage to

or replacement of equipment and property, and any costs of recovering,

reprogramming, or reproducing any program or data stored in equipment

that is used with our products. This guarantee gives you specific legal

rights. You may have other legal rights which vary from country to state.

Some country do not allow limitations on how long an implied warranty

lasts, so the above limitation may not apply to you.

Returns

Returned merchandise must be sent prepaid and in the original packing.

Package must be clearly labeled with a Return Merchandise

Authorization Number (RMA #).

For repair and warrantee service contact contact Nightowl Stage Lighting

at NightowlStageLighting.com for an RMA number and shipping

instructions. Include a phone number in case we need to speak to you in

person. Our website contains all up to date contact information.

Claims

Damage incurred in shipping is the responsibility of the shipper;

therefore, the damage must be reported to the carrier upon receipt of

merchandise. It is the customer's responsibility to notify and submit

claims with the shipper in the event that a fixture is damaged due to

shipping. Any other claim for items such as missing component/part,

damage not related to shipping, and concealed damage, must be made

within seven (7) days of receiving merchandise. We will be happy to

assist you with your shipping claim should there be an issue.

USER

MANUAL

24*15W RGBWA 5in1 LED aluminium par light

Nightowl Par64-LED

Technician before replacement. The projector has thermal protection device

that will switch off the projector in case of overheating, should this occur,

check if the fans work normally or fan and fan shield are blocked by dust. If

the projector not operational, call a qualited technician. After cleaned and

repaired, the projector can be restarted.

Any maintenance work should only be carried out by qualited

technicians.

KEEPING THE PROJECTOR CLEAN

It denitely necessary to keep a projector clean for its reliable

use. Cooling fans and their shield should be cleaned every

15days. LED lamps’lens and cover should be cleaned regularly

for optimized light output.

Cleaning frequency depends on how often a projector is used and

its operational environment. A soft cloth and typical glass cleaning

products should be used in cleaning. It is recommended to clean

the external optics at least once every 20 days.

Do not use any organic solvent, e.g. alcohol, to clean t housing of

the apparatus.

Troubleshooting

PROBLEM

ACTION

The projector can’t be started

>Power Cable not connected well

>Power supply damaged or not

connected well, a quali ed

Technician should be required

>Control board not connected well

and a quali ed Technician should be

The lamp can be started, but

LED lampsare off and not

controlled

>LED boards not connected

properly, a quali ed technician is

needed

A projector’s lamps are on

but it doesn’t respond to the

controller

>Make sure that the projector’s start

address is correctly set

>Replace or repair the DMX cable.

The beam appears dim and

Its brightness slows sharply

>Ambient temperature too high

which result in a projector

overheating, necessary ventilating

measures needed.

Testing mode: press up/down button to select sound control and auto

mode.

When its language selection status, press up/down button to select

Chinese or English.

DMX Mode

When operating in DMX mode (detected when DMX cable is plugged

in to a DMX controller) the control panel will only be used for DMX

starting address and the light will be controlled using 4/8DMX

channels.

When you daisy chain multiple units, a DMX line terminator is highly

recommended to prevent erratic behavior.

DMX 512 Control Channels:

5 Channels:

9 Channel:

Always disconnect a projector from the POWER when

not in use or before cleaning or any

Stand Alone or Master/Slave Mode

LED Display Screen Operation:

Dispaly:

Channel

Function

No.

CH1

RED

Red dimmer, (0-255) linear dimming,