on stage GS5012 User manual

Questions or Concerns? Contact the Customer Service Department
at [email protected]om or call us at [phone].
©2019 The Music People On-Stage.com
GS5012
12-Space Ukulele Rack
Instruction Manual
Assembly Instructions
Assembling as a Stand
Parts Included:
U-Brackets
x2
Long Hex
Bolts
x2
Short Hex
Bolts
x2
2. Attach U-bracket to end cross bar
using one long hex bolt. Make sure
yoke holes are on the sides. Repeat
with second U-bracket on opposite end.
1. Attach support leg to support
arm using one short hex bolt.
Tighten bolt securely. Flip over
so leg is on the ground. Repeat
for second pair.
3. Attach cross bar
with U-bracket and
long hex bolt into one
support arm. Tighten
bolt securely.
4. Insert one yoke into
cross bar. Fasten one
nut to opposite side
using wrench to
secure yoke.
5. Repeat step 4 for
remaining yokes and nuts.
Yokes
x12
Support Arms
x2
Wall Mount
Support Arms
x2
Wall Mount
Support Legs
x2
Support Legs
x2
Nuts
x12
Wood Screws
x4
Wrench
x1
Hex
Wrench
x1
Cross Bar
x1

Assembly Instructions
Mounting to Wall
2. Attach U-bracket to end cross bar
using one long hex bolt. Make sure
yoke holes are on the same side as the
U-bracket. Repeat on the same side
as the U-bracket.
1. Attach wall mount
support arm to wall mount
support leg. Use short hex
bolt to secure tightly.
Repeat for second pair.
3. Attach cross bar with
U-bracket into wall support
leg with long hex bolt. Holes
should be parallel with wall
mount support arm. Tighten
bolt securely.
Completed Wall MountCompleted Stand
6. Attach assembled wall mount
support leg to wall. Be sure to use
a stud finder or wall anchors to
properly secure the GS5012.
4. Insert one yoke into
cross bar. Fasten one nut to
opposite side using wrench
to secure yoke.
5. Repeat step 4
for remaining
yokes and nuts.
Wall