OnReal G1 User manual

Contents
Live Camera
Wireless Camera
User Manual
Micro-USB
Cable

Clip Viscose
Sucker Magnet

Get to Know Your
Live Camera
micro SD
Slot
micro-USB
Port

Buzzer
Mic
Lens Power/Wi-Fi
Buon
Camera Status LED
Shuer Buon
Charger Status
LED

Seng up your camera for
the first me in two steps.
Step1. Charging the baery
Note: Please charge for at least
2 hours (2.1A) to make sure your
device is fully charged.

2. The “Charger Status LED” turns
green, when your camera is
fully charged.
While it's charging, “Charger
Status LED” turns orange.
1. Connect your camera to a power
source using the supplied Micro
USB cable.

Step2. Inserng the micro SD card
1. Find the micro SD slot located
at the boom of the camera.
Note: Please use brand Micro SD
and class 10.(for example,16GB
SanDisk class 10)

2. Insert a micro SD card with the
gold-plated side facing the
same direcon as the lens.
3. The card will make a slight
clicking sound, when it’s
securely inserted.

Powering on your camera
How to take photo
1. Press the “Shuer Buon”.
2. The “Camera Status LED” will
flash red, and your camera
will beep.
1. Simply press the “Power/Wi-Fi
Buon” to power on your
camera.
2. The “Camera Status LED” will
keep flashing green.

How to record video
1. Press the "Shuer Buon"about
2 seconds, ll the "Camera Status
LED" flash red,also beep.
2. Shortly press the"Shuer Buon"
to stop recording, the "Camera
Status LED" will be flashing green

How to connect wifi
1.Camera app
1. Open the App store or the
Playstore on your Mobile phone.
2. Search for the app "NeoMe" and
install it.
connect to your mobile device
(wi-fi) when the baery is low.
Note:Please do not aempt to

2.On your camera
1. Be sure the camera is powered
on.
2. Short press"Power/Wi-Fi Buon",
the “Camera Status LED” will
keep flashing for 3 seconds,then
wifi is on.
3.On your phone
1. Press the Home buon, and
then tap Sengs > Wi-Fi.
2. select the wifi named somehow
" CAM_.........."
3.Enter the default password 1234
5678 , tap connect ll shows
connected.

4..Find and open the App "Neome"
on your phone , enjoy the live
video . You can also download
the video to your phone and
review it.
5. Note: the wifi will be
disconnected if you dont use it
for a long me.

LED indicator
1. Camera Status LED
Status
Power on and
Standby Flashing green
Flashes red once
Flashing red
Turns yellow
Turns white
Flashing blue
for 3 seconds
Taking photo
Recording video
Enabling Wi-Fi
System error
Removable USB driver
(As: SD memory full,
no SD card, etc.)
mode(Link to PC)
LED behavior

2. Charger Status LED
Status
Charging Turns orange
Turns green
Flashing red
Full charge
Low baery
LED behavior

CAUTION
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRENT TYPE.
DISPOSE OF USED BATTERY
ACCORDING TO THE INSTRUCTIONS.

Specificaons
Model: G1
Color: Black
Weight: 25g
Dimension: 42mm x 42mm x 20mm
Chipsets: NTK 96658
Sensor: SONY IMX179
Image Sensor Resoluon: 8 Mega
Pixels
Wireless: 802.11b/g/n
Lens: 6G(Glass) 120° Viewing
Angle
Photo Resoluon: 8M/5M/2M
Image Format: JPG
Video Resoluon: 1080P(30fps),
720P(30fps), WVGA-(30fps),
VGA(30fps)