Optima Lighting Coloray Wash 12 User manual
1
USER MANUAL FOR COLORAY SPOT/WASH 12
SAFETY INSTRUCTIONS
Read the instructions in this manual befor e attempting to install or operate this
xture.
• The xture must only be used indoor.
• Protect the unit from dripping and splashing.
• Protect data cable from bei ng walked on or pinched.
• Do not block any of ventilation openings.
• The xture must be installed by experienced qualied sta.
• Do not open the xture and try to repair the xture personally.
• Please immediately contact the distri butors as the xture is in fault
operation or damage.
Contents/Accessories
One set of colorwash/spot12 includes:
1) 4 x xtures
2) 1 x driver
3) 1 x AC power cord
4) 4 x brackets
5) 8 x tightened screws, washers
6) User manual
INSTILLATION AND OPERATION
ORDER DIRECTLY TODAY AT: www.BulbAmerica.com or CALL TOLL FREE 888-505-2111
2
1) Unpack the box and fix the fixture with bracket.
2) Connect the cable of the fixture to the driver.
3) Connect the AC power cord to the socket.
Note: Make sure the fixtures is properly positioned and securely installed
before use.
DMX MODE:
on 3 channel mode (R:0-100%, G:0-100%, B:0-100%)
on 6 channel mode (R:0-100%, G:0-100%, B:0-100%)
on 12 channel mode (R:0-100%, G:0-100%, B:0-100%)
on stand-alone mode- 3 channels (25 build-in effects, speed/strobe,
illumination)
Users can test stand-alone mode via setting dip switch without DMX
controllers as selecting the stand-alone mode. Users have to disconnect
DMX before testing stand-alone mode on board.
Please note that if the DMX mode is changed the Driver must be powered
off and on.
STAND-ALONE FUNCTIONS:
There are 25 effects in stand-alone mode, including 10 fixed colors and 15
chase/ fade modes.
The stand alone mode contains 3 channels.
Channel 1: Effect mode.
Channel 2: Speed/Strobe
Channel 3: Illumination (only for fixed color)
Add.1 (DMX value 1-4%) 100% Red
Add.2 (DMX value 5-8%) 100% Green
Add.3 (DMX value 9-12%) 100% Blue
3
Add.4 (DMX value 13-16%) Yellow
Add.5 (DMX value 17-20%) Purple
Add.6 (DMX value 21-24%) Sky blue
Add.7 (DMX value 25-28%) Amber
Add.8 (DMX value 29-32%) Lavender
Add.9 (DMX value 33-36%) Pink
Add.10 (DMX value 37-40%) White
Add.11 (DMX value 41-44%) Red, Blue, Pink. Yellow color cycle
Add.12 (DMX value 45-48%) Lavender, Sky blue, Green, Purple
color cycle
Add.13 (DMX value 49-52%) All fixed color cycle.
Add.14 (DMX value 53-56%) Pink, Red, Purple, Blue, Sky blue,
Green, Amber, pink color chasing
Add.15 (DMX value 57-60%) Amber, Lavender, Green, purple, Blue,
Sky blue, Red, Yellow wave-fade
Add.16 (DMX value 61-64%) All fixed color chasing separately.
Add.17 (DMX value 65-68%) All fixed color chasing.
Add.18 (DMX value 69-72%) Blue, Lavender, Yellow, Sky blue
cross-fade
Add.19 (DMX value 73-76%) Pink, Green, Blue, Amber cross-fade
Add.20 (DMX value 77-80%) All fixed colors cross-fade
4
Add.21 (DMX value 81-84%) White, Pink, Sky blue, Yellow
cover-fade
Add.22 (DMX value 85-88%) Green, Purple, Blue, Red cover-fade
Add.23 (DMX value 89-92%) All fixed color cover-fade
Add.24 (DMX value 93-96%) All fixed color cove-fade
Add.25 (DMX value 97-100%) Red, Green, Blue, Yellow wave-fade
SIGNAL INDICATORS:
Receive DMX LED: The green light emitting diode shows when DMX data is
reaching the Coloray 65 driver.
Receive Power LED: The red light emitting diode shows when power is
reaching the Coloray 65 driver.
COLORAY 65 OUTPUT CONNECTIONS
There are four data connectors are supplied in Coloray 65 driver and five
metes 20AWG cable is supplied with each Coloray fixture. This 5-pin cable
can be extended to 20 m.
COLORAY SPOT/WASH 12 SPECIFICATIONS
Electrical:
Power consumption max: 4 x 1W Red. 4 x 1W Green. 4 x 1W Blue
Input current at full power: 350mA
Pin No. Function Core Color
1 +15Vdc White
2 Red 0-5V Red
3 Blue 0-5V Blue
4 Green 0-5V Yellow
5 0V Black
5
Power requirement: 15 DC
Compatible driver: Coloray Driver 65
Optical:
Dominant wavelength: R 615nm.G 510nm.B460nm
Total output (Lumens): R70. G125. B57
Beam Angle: 25 degree
Lenses: Clear tempered glass. Soft-focus tempered glass
Mechanical:
Housing: Aluminum body in silver and black
Data connector: 5-pin XLR with 20AWG cable
Weight: 0.85 Kg
Dimensions: L157mm×W123mm×H36mm
Environment:
Maximum temperature: +50°C
Lifetime: 100,000 hours
Wiring diagrams
This manual suits for next models
1
Table of contents
