Osp designs Tv144bg User manual

TV144BG

TV STAND

OPERATING INSTRUCTIONS

LIMITED WARRANTY

OSP Designs Warrants, to the original purchaser its products to be free from defects in material and workmanship for a period of 90 days. Defects

and damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of OSP

Designs is not covered. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential

damages is excluded. The user assumes all risk of injury resulting from use of this product. This warranty gives you speciﬁc legal rights, and you

may also have other rights which vary from state to state.

To make a warranty claim, contact Customer Service, provide model number, sales receipt and description of the problem. It is the customer’s

responsibility to prepay freight on any components returned to the factory. OSP DesignS will pay return freight on components covered under

terms of warranty.

WARNING

1. Do not use this product unless all screws and bolts are

securely tightened.

2. Check that all screws and bolts are tight every three months or

as needed.

3. Dispose of packing material properly. Do not use plastic cover

as head covering. It may cause suffocation.

4. Do not use this product as a stepladder.

5. Use this product for its intended purpose only.

6. Secure Platic Caps (7) as they may be a choking hazard for

small children.

SAFETY FIRST!

4HEªFOLLOWINGªINFORMATIONªISªTOªINSUREªTHATªYOUªTHEªUSERªOFª

THISªPRODUCTªAREªGIVENªUPªTOªDATEª3AFETYªINFORMATIONªREGARD

INGªYOURªPURCHASEªª!SªWITHªALLª3AFETYªINFORMATIONªTHESEªAREª

RECOMMENDATIONSªANDªTHEªlNALªRESPONSIBILITYªFORªYOURªSAFETYª

COMPLIANCEªISªINªYOURªHANDS

Furniture more than 30 inches tall is potentially unstable

and must be anchored to a wall or ﬂoor with straps or

other restraints.ªª

7EªHAVEªINCLUDEDªINªYOURªPACKAGEªSUITABLEªWALLªMOUNT

INGªSTRAPSªª4HESEªSTRAPSªAREªTESTEDªTOªHOLDªTHEªPRODUCTªASª

DELIVEREDªª!NYªELECTRONICSªORªOBJECTSªOFªWEIGHTªYOUªCHOOSEªTOª

PLACEªONªTHISªFURNITUREªSHOULDªBEªINDIVIDUALLYªANCHOREDªACCORD

INGªTOªTHEªMANUFACTURERSªSAFETYªINSTRUCTIONS

Avoid Storing Items on higher shelving that will attract a

child’s Attention.

ª!ªSMALLªCHILDªMAYªATTEMPTªTOªCLIMBªTHEªFURNITUREªCAUSINGªAªTIPª

OVERªACCIDENT

Do not place objects on the furniture larger than those

recommendedªªª

/VERLOADINGªCANªCAUSEªTHEªFURNITUREªTOªTIPªOVER

Place Televisions As Far Back As Possible on the TV

STANDª

4IPªOVERªISªMOREªLIKELYªIFªTHEª46ªISªPLACEDªFORWARDLYªONªTHEª

STAND

Hide all Cables and Wires behind the TV or Stand.

ª!LLªWIRINGªSHOULDªBEªKEPTªOUTªOFªTRAFlCªAREASªTOªAVOIDªACCIDEN

TALªTRIPPINGªTHATªCOULDªPOTENTIALLYªTIPªOVERªTHEªFURNITURE

TV144BG

TV STAND

ASSEMBLY INSTRUCTIONS

IMPORTANT NOTE:

1. Use hand tools only for assembly as power tools may

cause damage

2. Carefully remove any staples used for packaging.

3. Phillips Screwdriver also needed for assembly (not provided)

Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.

STEP 1 Attach one Suction Cup (8) to each Glass Support (9). Secure one Glass Support (9) to each Front Leg (3) using one Extra Small Sllen Screw

(14) for each Glass Support (9). Secure two Glass Supports (9) to Back Panel (4) using one Small Phillip Screw (12) for each Glass Support (9). FULLY

TIGHTEN ALL SCREWS,FULLY TIGHTEN ALL EXTRA SMALL ALLEN SCREWS (14) USING ALLEN WRENCH (22).

STEP 2 With Glass Supports (9) facing inwards, secure both Front Legs (3) to bottom of Top Panel (1) using four Small Allen Screws (13) for each

Front Leg (3). Insert two Cam Lock Studs (11) into bottom of Top Panel (1), with Glass Supports (9) facing inward, align and secure Back Panel (4) to Top Panel

(1) using two Cam Locks (10). FULLY TIGHTEN ALL SMALL ALLEN SCREWS (13) USING ALLEN WRENCH (23),

FULLY TIGHTEN ALL CAM LOCKS (10).

STEP 3 Carefully place Bottom Panel (2) onto assembly, secure front end of Bottom Panel (2) using two Long Allen Screws (15) and two Feet (5), secure

rear end of Bottom Panel (2) using two Long Phillips Screws (16). Secure three Feet (5) to Bottom Panel (2) using one Medium Allen (14) for each Foot (5).

FULLY TIGHTEN ALL SCREWS.

STEP 1

STEP 2

STEP 3

PART QTY

1.ª4OPª0ANEL ª

2.ª"OTTOMª0ANELª

3.ª&RONTª,EGª

4.ª"ACKª0ANEL ª

5.ª&OOTª

6.ª'LASSª3HELF ª

7. 0LASTICª#AP ª

8. 3UCTIONª#UPª

9.ª'LASSª3UPPORTª

10.ª#AMª,OCK ª

11.ª#AMª,OCKª3TUDª

12.ª3MALLª0HILLIPSª3CREW ª

13.ª3MALLª!LLENª3CREWª

14.ª%XTRAª3MALLª!LLENª3CREW ª

15.ª-EDIUMª!LLENª3CREWª

16. ,ONGª!LLENª3CREWª

17. ,ONGª0ILLIPSª3CREWª

18. !NCHORª

19. .YLONª3TRAPª

20. ,ONGª7ALLª3CREWª

21. 3HORTª3TRAPª3CREWª

22. -ª!LLENª7RENCHªNOTªSHOWNª   

23. -ª!LLENª7RENCHªNOTªSHOWNª   

STEP 4

STEP 4 Cover Cam Lock (10) holes on rear of Top Panel (1) using two Plastic Caps (7). Carefully slide Glass Shelf (6) onto Glass Supports (9).

STEP 5: ANTI-TIPPING STRAP

Attach Nylon Strap (19) to rear of Back Panel (4) using Short Strap Screw (21). Place TV Stand in desired location, carefully drill a ¼ pilot hole into wall, gently