Pelsue SB-SM1 User manual

Part #500964-001
Product Manual:
Model #SB-SM1
Fall Arrest Tower Base, 4-Arm Manway Mount
T.A. Pelsue Company
2500 South Tejon Street
Englewood, Colorado, USA 80110
Tel. [phone] or 303-936-7432
Fax. [phone]
Internet: www.pelsue.com
Email: [email protected]
ISO 9001 Certified

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010
Page 2Page 2

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010 Page 3
Since our inception in 1963 – the T.A. Pelsue Company has designed and manufactured high
quality equipment to improve the personnel ef-
ciency and working conditions in various under-
ground, conned, and outdoor areas.
Founded by T. Allen Pelsue, the company has estab-
lished a continuing reputation for excellence in the
production of ne products for a broad spectrum of
industry throughout the world.
Now, in our second generation of family direction,
continued commitment to innovation and quality
makes Pelsue a leading source of equipment for
many types of conned spaces. We specialize
in safety, retrieval, fall arrest, ventilation, cable
placing, splicing, and maintenance nationally and
abroad. With more than 70,000 square feet of facil-
ities available, Pelsue continues the dedication that
has made us pre-eminent in this eld.
ISO 9001 Certified

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010
Page 4
Table of Contents
Section Description Page #
1.0......................................General Information.................................. 5
1.1...........................Quality Policy
1.2...........................Pelsue Product Warranty
2.0......................................Introduction & Product Information........ 7
2.1...........................Serial Number
3.0......................................Conguration & Assembly........................ 8
4.0......................................Safety..........................................................9
4.1...........................Warning Statement
4.2...........................Safety Alert Symbol
4.3...........................General Safety Information
4.4...........................Operating Safety
4.5...........................Maintenance Safety
4.6...........................New Operator Safety Information
5.0......................................Product Operation.....................................12
5.1...........................Product Description & Capabilities
5.2...........................Product Installation & Set-Up
6.0......................................Maintenance & Inspection........................16
6.1.......................... Maintenance
6.2.......................... Inspection
6.3...........................Inspection Log
7.0......................................Storage.......................................................19
8.0...................................... Contact Information.................................. 19

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010 Page 5
1.0 General Information
T.A. Pelsue Company
Quality Policy
OUR GOAL IS THE PURSUIT OF NEVER-ENDING IMPROVEMENT IN
PRODUCT QUALITY AND BUSINESS SYSTEMS.
METHODS TO BE EMPLOYED IN ATTAINING THIS GOAL WILL INCLUDE
NEW PRODUCT QUALITY PLANNING, EMPLOYEE TRAINING, AND
UTILIZATION OF EMPLOYEE INVOLVEMENT GROUPS TO SOLVE
PROBLEMS.
IN AN INCREASINGLY COMPETITIVE MARKETPLACE, ENSURING
CUSTOMER SATISFACTION IS ONE OF THE DIFFERENTIATORS THAT
SETS YOU APART FROM THE PACK AND YIELDS A COMPETITIVE
ADVANTAGE.
THEREFORE, WE WILL SUPPORT TOTAL CUSTOMER SATISFACTION BY
IMPLEMENTING THE ISO 9001 QUALITY SYSTEM AND PROVIDING
THE NECESSARY ATMOSPHERE AND TRAINING TO NURTURE THIS
CONCEPT THROUGHOUT OUR ORGANIZATION.
WE WILL MAKE EVERY BUSINESS DECISION AS THOUGH THE QUALITY OF
THE PART OR SERVICE PROVIDED WAS DESTINED FOR OUR OWN
OR OUR FAMILY’S USE. WE WILL ALWAYS THINK QUALITY FIRST.
EVERY T.A. PELSUE COMPANY EMPLOYEE IS EXPECTED TO COMMIT TO
THIS PHILOSOPHY IN THE PERFORMANCE OF HIS OR HER DAILY TASKS.
QUALITY FIRST!
T.A. PELSUE COMPANY SENIOR MANAGEMENT TEAM
1.1 Quality Policy

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010
Page 6
1.2 - Pelsue Product Warranty
PELSUE FALL ARREST/ RETRIEVAL PRODUCT WARRANTY
• Pelsue products are designed and engineered to perform as stated in published specications. Quality
materials and workmanship are used in the manufacture of this product. With regular maintenance and
proper care, Pelsue equipment provides many trouble free hours of operation.
• The T.A. Pelsue Company warrants to the buyer that material furnished will conform to specications
and will be free from defects in material and workmanship from the date of shipment to the original
buyer, for the period listed by product description at the bottom of this warranty statement.
• In the event of failure of any components of a Pelsue product within the warranty period, service must
be pre-approved by the T.A. Pelsue Company and service must be performed by the T.A. Pelsue Com-
pany Parts and Service Department in Englewood Colorado, or at the option of T.A. Pelsue Company,
service may be performed at any designated service center, which may include any authorized service
center for the component manufacture.
• Damage or failure due to misuse, mishandling, or unauthorized modications will not be covered by
this warranty. Unless otherwise agreed, the T.A. Pelsue Company shall repair or replace the defective
components within (30) calendar days of notice of failure. T.A. Pelsue Company’s obligation hereun-
der, shall be limited to the repair or replacement of the product or component as set forth above, and
shall not include any liability whatsoever for damages caused by such failure, including but not limited
to consequential or incidental damages owing from use or lack of use of product.
• Any replacement, repair, modication, installation or other service performed by the T.A. Pelsue Com-
pany shall be warranted by the remainder of the unexpired period of the warranty, or for a period of (90)
calendar days, whichever is longer.
• All materials or parts returned for credit or warranty shall be returned only with prior approval, and will
be subject to factory inspection before credit is allowed. Parts claimed defective will be replaced upon
request and will be invoiced as purchased, subject to credit when the parts claimed to be defective
have been received and examined by the factory.
• This warranty is expressly in lieu of all other warranties expressed or implied, including any warranties
of merchantability or warranties of tness for any particular use and all other obligations or liabilities in
connection with the sale of this equipment.
Product Description Warranty Coverage*
• Davits and Bases, Life Guard Systems, Fall Arrest Towers,................ 1 year
Hitch Mounts, Mounting Sleeves
• Winches................................................................................................ 1 year
• Winch Cable and Rope (not including standard wear and................... 3 months
tear or misuse or improper storage)
• Rope..................................................................................................... 3 months
• Pelsue Painted or Plated Surfaces....................................................... 1 year
*From date of shipment to original buyer.
T.A. Pelsue Company, 2500 South Tejon Street, Englewood, Colorado 80110, 800-525-8460

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010 Page 7
2.0 - Introduction & Product Information
MODEL:____________________________________________
Serial Number :_______________________________________
Date of Manufacture (DOM):____________________________
Congratulations on your choice of a Pelsue Model #SB-SM1 4-Arm Manway Mount to compliment your fall arrest
system. This equipment has been designed and manufactured to exceed fall arrest requirements and regulations in
order to meet the needs of the discriminating operator.
Safe, efcient and trouble-free operation and maintenance of the system requires that anyone who will be operating,
maintaining, or inspecting the equipment, read, understand and follow all of the operation, safety, maintenance, and
inspection instructions contained within this manual. This manual covers the Pelsue Model #SB-SM1 4-Arm Manway
Mount. Use the Table of Contents as a guide to nd specic information.
Keep this manual available for future reference and for usage as a tool in the instruction of new operators. Establish a
regular training program for all operators. Establish a regular maintenance and inspection program to keep the equip-
ment in top condition.
This product is a part of a complete Fall Arrest system.
The user must read, understand and follow the instruc-
tions contained in this manual for each component or
total system before using this equipment. Establish
an appropriate training, maintenance and inspection
program for your people and the equipment. Failure
to follow these instructions could result in serious
injury or death.
2.1 - Serial Number
Product Serial Number
Always give your dealer the serial number of your Pelsue Fall
Arrest product when ordering parts or requesting service or
other information.
The serial number decal is permanently embossed with a
serial number. The serial number decal will appear as shown
in Figure 2a at the right and is located on the top face of the
base plate (see Figure 2b ). A space has been provided below
for the recording of the serial number for future reference.
Figure 2a:
Serial Number Decal
#SB-SM1
Figure 2b:
Serial Number Decal Location
SERIAL
NUMBER
LOCATION

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010
Page 8
PIVOTING
ARMS
SLIDING
MOUNTING
BLOCKS
HANDLE
Figure 3a: #SB-SM1
Parts Diagram
TOWER
MOUNTING
LUGS
3) 500234-001
3.0 - Conguration & Assembly
Upon initial receipt of the #SB-SM1 system, inspect the packaging for any evidence that the product may have been
damaged in shipment. While unpacking the product, inspect all of the components for damage. If damage to any of
the components is discovered, DO NOT USE THE PRODUCT! Alert the shipping carrier immediately of the damage
to the shipment.
1. Ensure that the product has been shipped with all the necessary components and is in working order
(Refer to Fig. #3a)
**Refer to parts list above if replacement parts are required. Replacement parts can be ordered from the T.A. Pelsue
Company at 800-525-8460.
Verify that all parts are present before product use.
The #SB-SM1 is shipped fully assembled.
Figure 3b: #SB-SM1
Label Location
1
2
3
1) #501096-001
2) #103299-001

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010 Page 9
The following section will address the safety precautions which must be adhered to when working with Pelsue Fall Arrest
equipment such as the #SB-SM1 4-Arm Manway Mount. Any user must familiarize themselves with the information in
this section before utilizing the equipment.
SIGNAL WORDS:
Note the use of the signal words DANGER, WARNING and CAUTION with the safety messages. The appropriate signal
word for each message has been selected using the following guidelines:
DANGER- Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. This
signal word is to be limited to the most extreme situations or for hidden or unseen hazards.
WARNING- Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury and
includes obvious and hidden hazards. It may also be used to alert against unsafe practices.
CAUTION- Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It
may also be used to alert against unsafe practices.
You are responsible for the safe operation, maintenance and inspection of your Pelsue #SB-SM1 4-Arm Manway mount.
You must ensure that anyone who will operate, maintain, inspect or work around the equipment be familiar with the
operating and maintenance procedures and related safety information contained in this manual. This manual will take
you step-by-step through the workings and capabilities of the #SB-SM1 4-Arm Manway Mount and alert you to all good
safety and operating practices while using the system.
Remember, you are the key to safety. Good safety practices not only protect you but also the people around you. Make
these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with
the procedures recommended and follows safety precautions. Remember, most accidents can be prevented. Do not risk
injury or death by ignoring good safety practices.
• System owners must give operating instructions to operators or employees before allowing them to use the
equipment and at least annually thereafter.
• The most important safety device on this equipment is a safe operator. It is the operator’s responsibility to
read and understand all safety and operating instructions in the manual and to follow those guidelines. Most
accidents can be avoided.
• A person must understand the operation of this equipment and be trained in it’s usage before operating the
equipment. An untrained operator exposes himself and others to possible serious injury or death.
• Do not modify the equipment in any way. Unauthorized modication may impair the function and/or safety and
could affect the life of the equipment.
• Think SAFETY! Work SAFELY!
4.0 - Safety
4.1 - Warning Statement
WARNING!
Products manufactured or sold by the T.A. Pelsue Company
are intended for use by professionals trained and experienced
in the use, inspection and maintenance of these products.
Paraprofessional users such as volunteer rescue workers
and sportsmen involved in risky sports such as climbing and
caving will be held to the same standard of experience and
training as professionals.
Technical rescue, repelling, climbing and the training
involved are hazardous activities. Each situation has its
own unique conditions and must be evaluated. Effective
risk management comes from experience, proper training
and good personal judgement.
WARNING
!!
Failure to read and heed all labels and instructions may
result in injury or death. Inspect all components before
and after each use, and remove from service if any
damage or defect is found. Keep product free from dirt
and moisture. Do not leave a suspended load
unattended. Do not exceed maximum rated loads.

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010
Page 10
SAFETY ALERT SYMBOL
This Safety Alert symbol means ATTENTION! BECOME
ALERT! YOUR SAFETY IS INVOLVED!
The Safety Alert symbol identies important safety messages
on your Pelsue Retrieval Product and in the manual. When
you see this symbol, be alert to the possibility of personal
injury or death. Follow the instruction in the safety mes-
sage.
Why is this symbol important to you?
3 BIG Reasons: Accidents Disable and Kill.
Accidents Cost You Money.
Accidents Can Be Avoided.
4.2 - Safety Alert Symbol
4.3 - General Safety Information
1. Read, understand, and follow the Product Manual and all safety signs before using, maintaining or inspecting the
equipment.
2. Refer to and follow applicable standards and regulations. Comply with requirements of local regulations for your
applications.
3. Establish an equipment-use training program for inexperienced employees. Only trained, competent persons shall
use the equipment. An untrained operator is not qualied to operate the system.
4. Have a rst-aid kit available for use should the need arise and know how to use it.
5. Provide a re extinguisher for use in case of an accident. Store in a highly visible place.
6. Install and properly secure all guards and shields before operating.
7. Wear appropriate protective gear. This list includes but is not limited to:
• A hard hat
• Protective shoes with slip resistant soles
• Heavy gloves
• Protective clothing
• Face Protection
8. Review and follow the Pre-Operation Checklist before using a component in the system or system itself.
9. Establish a regular maintenance and inspection program with your equipment and maintain detailed records.
10. Review safety related items and operating instructions with all personnel on a regular basis.
4.4 - Operating Safety
1. Read, understand and follow the Product Manual as well as all printed warnings that may be located on the product itself
before using, maintaining or inspecting the equipment.
2. Train all operators before allowing them to use the product. An untrained operator exposes themselves, bystanders
and workers to possible serious injury or death.
3. Visually inspect the product and all auxiliary components and equipment before using. Correct any problems before
using the equipment.
4. Securely anchor the product before using.
5. Use only certied anchor and connector components in your system.
6. Use only an approved full body harness for the workers.

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010 Page 11
4.4 - Operating Safety (continued)
4.5 - Maintenance Safety
1. Read, understand and follow the Product Manual as well as any printed warnings that may be present on the product
before using, maintaining or inspecting the equipment.
2. ANSI and OSHA require a regular inspection program for all fall arrest equipment as well as properly-documented
results of the inspections. Follow the inspection procedures contained in this manual and use the inspection form
to document the results (see section 6.0).
3. Keep instructional and safety signs clean and legible at all times. Clean or replace as required.
4. Remove the equipment from service if a problem is found during the inspection. Return to an authorized repair depot
or the factory for service.
The Pelsue #SB-SM1 4-Arm Manway Mount is designed as a portable Base System for a Pelsue Model #FT-C70 fall
arrest tower. Every new operator must read, understand and follow the instructions in this Product Manual. No person
should be permitted to use the equipment without prior proper training. The training should be reviewed with experienced
operators on a regular basis. At regular intervals, perform a detailed inspection of the equipment and document the
results. Remove the product from service if any deciencies are found. Alterations or misuse of this equipment or failure
to follow instructions may result in serious injury or death.
It is the responsibility of the owner’s organization to ensure that the proper training is provided to all operators of any fall
arrest device before they start working with the equipment. Follow all safety instructions exactly. Safety is everyone’s
business. By following recommended procedures, a safe working environment is provided for the operator, bystanders
and the area around the work site. Untrained operators are not qualied to operate the equipment.
Many features incorporated into this equipment are the result of suggestions made by customers like you. Read this manual
carefully to learn how to operate & install the equipment safely and as intended. By following the operating instructions
in conjunction with a good maintenance program, your product will provide many years of trouble free service.
4.6 - New Operator or Owner
7. Always work in teams. When working upon an elevated surface where a fall is possible, making a subsequent
rescue necessary, personnel must be available and ready for rescue immediately. Working alone with this equip-
ment is inherently dangerous and not advised!
8. Do not exceed the capacity of the system at any time (see section 5.1).
9. Establish a regular training program for all operators and potential rescuers.
10. Establish a detailed inspection program for your equipment and document the ndings. Return the equipment to
the manufacturer for repair if any problems are found.
11. Plan your work program before starting. Have the required people, equipment and procedures readily available in
order to safely complete any task prior to commencing.
12. Do not use the equipment around physical or environmental hazards. This list includes but is not limited to:
• Corrosion that may affect the structural integrity of the lifeline or other components.
• Chemicals which can degrade components in a manner which can not be visually identied.
• Toxic gases: Rescuers or workers can be killed in toxic environments.
• Heat or elevated temperatures.
• Moving machinery: Workers or auxiliary equipment can be contacted by or pulled into moving components.
• Sharp edges: Workers or the rescue equipment can be injured by or damaged by sharp edges or components.
• Electrical hazards: Stay away from power lines or components carrying electrical power.
• Overload: Do not overload the system at any time during operation (see section 5.1).
• Follow elevated space regulations and standards.

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010
Page 12
Figure #5.1a: #SB-SM1
Deployed
5.0 - Product Operation
The Pelsue #SB-SM1 4-Arm Manway Mount is built from carbon steel & incorporates high-strength alloy steel hardware.
The #SB-SM1 4-Arm Manway Mount is specically designed to provide a compliant mounting point for a Pelsue Model
#FT-C70 Fall Arrest Tower. All specications, instructions, and procedures provided within this manual or upon Pelsue
Specication Documents are based upon and only valid for usage with a Pelsue #FT-C70 Fall Arrest Tower. The T.A.
Pelsue Company can not verify equipment safety and/or compliance when utilized with anything other than Pelsue-
approved #SB-SM1 complementary products.
General Specications:
Designed for mounting on top of a closed manway commonly found in industrial locations
• Minimum Mounting Bolt Diameter: 17”
• Maximum Mounting Bolt Diameter: 40”
• Product Weight: 43 lbs. (19.2 kg)
5.1 - Product Description & Capabilities
The following section will address the capabilities and the general operation of the Pelsue #SB-SM1 4-Arm Manway
Mount. The instructions contained within this section should be adhered to each and every time the product is used. Any
person tasked with installing or operating the piece of equipment should be familiar with these procedures.
The load ratings presented here may super-
sede or be superseded by the capabilities
of an installed accessory. The rating of
a complete fall arrest system can only be
rated to the capabilities of its lowest-rated
component.
! WARNING ! - The user must ensure that the manway to which the #SB-SM1 is attached is
capable of withstanding all of the loads imparted to it by the device when proof-loaded. There
is a limitless variety of manways and addressing each potential scenario is beyond the scope
of this manual. A “qualied person” must approve each attachment point.
! WARNING ! - The user must ensure that all fasteners are properly secured in order to retain
the stated compliance of the entire system.
Materials & Construction
• Main Structure - Carbon Steel
• Hardware - Grade 8 Plated Steel
Compliance & Rating:
 •FallArrestTowerMounting:The #SB-SM1
Base Lugs provide a compliant mounting point
for a Pelsue Model #FT-C70 Fall Arrest Tower
when the tower is installed and utilized per the
published requirements.
Features:
• Portable Fall Arrest Tower Base for installation on
manways
• Independently pivoting arms and sliding blocks allow
maximum adjustment
• Folding arms and handle for easy transportation or
stowage
Other Requirements:
• It is the user’s responsibility to ensure that the struc-
ture to which the #SB-SM1 is attached is capable
of withstanding the loads imparted to it by a proof-
loaded system in order to retain stated compliance.
*Refer to the loading diagrams located within this
section for required information*
• The #SB-SM1 is only to be used in conjunction with
a Pelsue Model #FT-C70 Fall Arrest Tower, the
system must be employed according to the require-
ments and limitations of both the manway base and
the fall arrest tower.
Figure #5.1b: #SB-SM1
Folded

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010 Page 13
70” SAFE WORKING
RADIUS AT THE
TOWER BASE
LIFELINE
45 DEG. PERMISSIBLE
LIFELINE ANGLE
Figure #5.1d: #SB-SM1 w/ FT-C70
Safe Working Radius
Slider
Blocks
Pivot
Arms
Base
Lugs
Pivot
Bolts
TEST LOAD
APPLIED AS
SHOWN
PROOF LOADS
APPLIED TO
FALL ARREST
TOWER (refer to #500714-001,
Product Manual, #FT-C70)
1,300 LB (static)
5,000 LB. (equivalent dynamic
proof load)
Figure #5.1c: #SB-SM1 w/ FT-C70
Loading Diagram
1. Pre-Operation Inspection:
It is necessary to perform a visual inspection prior to each
time using the product. If any deciencies are found, remove
the product from service and contact the T.A. Pelsue Co.
regarding repair. The following checklist coupled with Figure
#5.2a should be used as a guide to determine whether the
equipment is in good operating condition prior to usage.
Equipment that is not in good condition can endanger the
safety of the operators during use.
The Pre-Operation Visual Inspection is not limited to, but
must include the following items;
a. Check that the product has no structural defects, such
as dents, bends, cracks, or fractures.
b. Ensure that all product rating & warning labels are clear
and legible.
c. Check that the arms pivot freely and that the slider blocks
are able to slide throughout the arms (interference of the
slider blocks can be indicative of a defect).
d. All hardware has not been damaged and is in working
condition.
5.1 - Product Description & Capabilities (continued)
5.2 - Product Installation & Set-up
Prior to Operation, the #SB-SM1 4-Arm Manway Base must be congured and installed according to the following
guidelines.
Figure #5.2a: #SB-SM1
Pre-Operation Inspection Points
Additional Requirements
& Notes:
• The #SB-SM1 is only to be
used on manways with a bolt
circle diameter ranging from
17” to 40” maximum.
• The #SB-SM1 is only rated
for use in conjunction with the
Pelsue Model #FT-C70 Fall
Arrest Tower.
• Installation of the #FT-C70 Fall
Arrest Tower on an SB-SM1
4-Arm Manway Base will
reduce the allowed number of
users from 3 to 2.
• The manway to which the #SB-SM1 is mounted to must have a cover installed, constructed of steel of at least 1/4” in
thickness for safe mounting.
• Mounting hardware must have a diameter of a 1/2” or greater. Do not mount the #SB-SM1 with any hardware of less
than 1/2” in diameter.
• Always remember that a complete fall arrest system must be employed and rated according to the capabilities of all
the components used within the system.

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010
Page 14
Figure #5.2e: #SB-SM1
Slider block
Figure #5.2e: #SB-SM1
Completely Installed
2.Installationofthe#SB-SM14-ArmManwayMount:
Choose a location where installation will provide suitable proximity to the work area yet minimize obstructions during
use and in the event a rescue is necessary.
•WhenutilizedasaFallArrestTowerAnchorage: Install the mount so that the tower to be utilized will clear
all obstructions yet provide full access to all required work areas within the towers’s safe working radius.
**Oncealocationischosen,Ensurethatthemanwaytowhichthemountwillbeattachedis
capable of withstanding all of the forces imparted to it by the proof-loaded system (Refer to
Section 5.1 of this manual).
a. Loosen any mounting hardware to which the 4 arms of the manway mount will be bolted to.
b. Position the mount so that each pivoting arm is angled to their respective corners (Refer to Fig. #5.2c & #5.2d).
c. Secure the mount by sliding the slider blocks within the arms to the mounting holes on the manway (Refer to Fig.
#5.2e).
d. Ensure that the mounting base of the #SB-SM1 is as close to the center of the manway as possible.
e. Tighten all hardware to standard dry torques according to the size of the mounting hardware.
! WARNING ! - Mounting hardware must be greater or equal to 1/2” in diameter!
f. Check to see and ensure that the arms of the manway mount sit ush to the manway cover and all hardware is
tightened.
5.2 - Product Installation & Set-up (continued)
!WARNING! - The user must ensure that
the #SB-SM1 is properly installed & securely
mounted on the selected manway before
attaching any lifeline or additional fall arrest
system components.
Figure #5.2b: #SB-SM1
Pre - Installation Figure #5.2c: #SB-SM1
Installation
! WARNING ! - Each corner of the base plate of the Model #SB-
SM1 Fall Arrest Tower base must be located above its respective
“arm” when the system is installed (Refer to Figure #5.2d). The
system is not approved for usage when any of the “arms” lie outside
of the angular boundaries dictated by the plate’s corners.
Figure #5.2d: #SB-SM1
Base Arms
Mounting
Block
! WARNING ! - The user must ensure
that the manway to which the #SB-SM1 is
attached is capable of withstanding all of
the loads imparted to it by the device when
proof-loaded. There is a limitless variety
of manway congurations and address-
ing each potential scenario is beyond the
scope of this manual. A “qualied person”
must approve each attachment point.

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010 Page 15
5.2 - Product Installation & Set-up (continued)
3.Installationofa#FT-C70FallArrestToweronthe#SB-SM14-ArmManwayMount
a. Install the #SB-SM1 4-Arm Manway Mount per the instructions in Step #2 of section 5.2 of this manual.
b. After the #SB-SM1 has been completely installed, remove the pin from the base of the fall arrest tower.
c. Place the fall arrest tower onto the #SB-SM1, center the base of the tower between the base lugs present on the
manway mount (Refer to Fig. 5.2f).
d. Align the holes of the fall arrest tower base with the holes of the base lugs on the #SB-SM1 and replace the tower’s
retaining pin (Refer to Fig. 5.2g).
e. Adjust the leveling pegs in order to make the tower vertical (Refer to Fig. 5.2g). ! WARNING ! - The #FT-C70 fall
arrest tower can only be used for the anchoring of personal fall arrest systems when placed in a vertical position!
f. Utilize the installed fall arrest tower within the limits of and according to the instructions provided within the Model
#FT-C70 fall arrest tower’s product manual.
Figure #5.2h: #SB-SM1 & FT-C70
Completely Installed
Figure #5.2f: #SB-SM1 & FT-C70
Installation
!WARNING! - The FT-C70 Fall Arrest Tower utilized in
conjunction with the #SB-SM1 4-Arm Manway Mount must
be installed according to its product manual, and utilized
by a qualied individual in order to retain its stated rating
& compliance.
!WARNING! - Any FT-C70 FallArrest Tower attached to the
#SB-SM1 4-Arm Manway Mount must be utilized within its
published limits and capabilities. The rating of the installed
tower may supersede or derate the capabilities of the #SB-
SM1 manway mount.
!WARNING! - The maximum number of connected users permitted on the Model
#FT-C70 tower will be reduced to “2” when utilized in conjunction with the Model
#SB-SM1 tower base. Each connection to the tower must be made via a 900 LB.
MAF (Maximum Arrest Force) device.
Figure #5.2g: #SB-SM1 & FT-C70
Installation
Leveling
Pegs
Hitch
Pin
Base
Lugs

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010
Page 16
MAINTENANCE & INSPECTION
6.0 - Maintenance & Inspection
1. Read, understand and follow the Product Manual and signs
on the product before using, maintaining or inspecting the
equipment.
2. ANSI and OSHA require a regular inspection program for all
fall arrest equipment and to maintain documented results
of these inspections. Follow the inspection procedure
contained in this manual and use the inspection form to
document the results.
3. Keep instructional and safety signs clean and legible at
all times. Clean or replace as required.
4. Remove the equipment from service if a problem is found
during the inspection. Return to an authorized repair depot
or the factory for service.
6.1 - Maintenance
For the most part, the Model #SB-SM1 is intended to be a maintenance-free piece of equipment, however several steps
can be taken to keep the system in top-notch working order and also extend the working life of the product.
Before Each Use:
1. Visual Inspection: Perform a complete visual inspection. Refer to section 6.2 for guidelines and take any
maintenance steps that are necessary.
Annually:
1. Clean Product: Use a damp cloth and mild soap to clean the structure and labels of dirt and residue. Be sure
the labels are legible (replacements are available from Pelsue)
2. Lubricate all Fastener Threads: Apply a water resistant lubricant suitable for high-strength steel fasteners to
all threads in order to extend the working life of these components.
3. Complete Inspection: Perform a thorough inspection, paying attention to the bullet points provided within
section 6.2. Record results and keep documentation. A log has been provided in section 6.3 specically for
the recording of the dates & results of annual system inspections.
Periodic Factory Service Inspection: It is recommended that the product be serviced by a factory authorized
service center or the manufacturer after a period of three years. Extreme working conditions may make it
necessary to increase the frequency of such and evaluation. Factory servicing shall include but not be limited
to an intensive inspection and cleaning of all internal and external components. Failure to provide proper
service may shorten product life and could endanger performance or function.
When completing an inspection of the Model #SB-SM1 4-Arm Manway Mount, the following specic items should be
checked;
1. Labels:
Check that all of the labels are clean and legible (Refer to Section 3.0). Clean the labels if any are dirty using
mild soap and a damp cloth. Replace if any are illegible. Decals & labels provide valuable warning and caution
information applicable to product usage and limitations, and should be visible and present at all times.
2. Base Lugs:
Visually inspect for any fracture or deformation. Overloading of the system can and will deform and damage the
lugs. Any Model #SB-SM1 system exhibiting deformation should be removed from service immediately.
3. Structure:
The entire product structure should be checked for cracks, gouges, dents, bends or breaks. If there are dents or
6.2 - Inspection

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010 Page 17
6.2 - Inspection (continued)
any other structural damage, the unit should be removed from service and returned to the factory for repair.
• Pay special attention to weld locations: look for cracks or separation at the welds. Keep in mind the nickel plat-
ing can age and scratch, this normal nish scratching can be confused with structural cracking. If there is any
uncertainty with regards to cracks, contact the Pelsue service department for assistance and/or recommenda-
tions
• Ensure that the sections of the device can freely move and be adjusted as intended without interference. Binding
or interference of any kind may be indicative of structural damage and must be cause for further inspection.
4. Slider blocks:
Ensure that when the slider blocks are not secured, that they can be easily slid throughout the arm without any
binding. Any binding could be indicative of damage to the arms. Ensure that the slider blocks can seat within the
arm properly when the tightening bolts are secured.

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010
Page 18
6.3 - Inspection Log
Date Labels Base Lugs Pivoting Arms Mounting Blocks Notes
Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Place a check (√) in the box if item is acceptable, place an x (X) in the box if item requires maintenance or repair
Model Number :
Serial Number : Date Purchased :
#SB-SM1

#500964-001 - Product Manual: Model #SB-SM1 Fall Arrest Tower Base - Revision 01 - Date: 03-04-2010 Page 19
For More Information...
T.A. Pelsue Company
2500 S. Tejon St.
Englewood, CO 80110
Toll Free: 1-800-525-8460
Telephone: [phone]
Fax: [phone]
Website: www.pelsue.com
Email: [email protected]
Prior to storage, the product should be thoroughly inspected and maintained. Repair or replace any worn or damaged
components to prevent any unnecessary down time at the next use.
Follow this procedure:
1. Thoroughly clean the entire unit using a mild soap on the frame and labels.
2. Perform a complete inspection of the unit and document the results prior to storage.
3. Ensure that the unit is completely dry prior to storage.
7.0 - Storage
8.0 - Contact Information

ISO 9001 Certified
T.A. Pelsue Company
2500 South Tejon Street, Englewood, Colorado, USA 80110
Toll free 800-525-8460 or 303-936-7432 Fax. [phone]
Internet: www.pelsue.com Email: [email protected]