PhaseOne iXU-RS 1000 User manual

1
Phase One
iXU-RS 1000 / iXU 1000 /
iXU 150 UAV
Camera Systems
Installation Guide
For
DJI M600 & M600 PRO

32
Phase One
iXU-RS 1000 / iXU 1000 /
iXU 150 UAV
Camera Systems
Installation Guide
For
DJI M600 & M600 PRO

21
Contents
Legal Notice.................................................................................................... 3
Contact Support........................................................................................... 3
Required items for complete configuration.................................... 4
What’s In the Box?....................................................................................... 5
Manuals ............................................................................................................. 5
Recommended Reading List .................................................................. 6
Introduction .................................................................................................... 7
Assembly Process........................................................................................ 7
Step 1: Installing the DJI UAV ................................................................. 8
Step 2: Configuring the UAV for Communication with the
Phase One Camera System..................................................................... 9
Step 3: Installing the iXU – DJI Communication Cable.............. 11
Step 4: Assembling the Ronin-MX Vibration Absorber ...........13
Step 5: Assembling the Phase One Camera System into the
Ronin-MX Gimbal ........................................................................................14
Step 6: Connecting the Cables.............................................................17
Step 7: Assembly Completion with Zip Tie ....................................19
Step 8: Configuring Phase One Camera to work with DJI
UAV .................................................................................................................. 20
Step 9: Activation process......................................................................21
Step 10: Calibrating the Ronin-MX.....................................................22

43
Legal Notice
The company disclaims all liability and warranties in relation
to this manual, including warranty of merchantability, fitness
for particular purpose and accuracy, and may amend it
without further notice.
Contact Support
You can contact Phase One Technical Support directly by
creating a support case at http://industrial.phaseone.com/
support.aspx
Required items for complete
configuration
The following items are required for installing Phase One iXU
camera on DJI M600 & M600 Pro drone:
• Phase One iXU camera
• DJI M600 / M600 Pro drone
• DJI Ronin-MX Gimbal (with Vibration Absorber)
• Additional remote control unit for iX Capture Mobile app.
• Battery Power distributer
• Additional battery for powering the Phase One iXU
(Intelligent battery)
• Phase One UAV accessory kit (73149 ,includes 2 cables,
mount and screws + washers)

65
What’s In the Box?
The following table lists the items required for installing the
iXU-RS 1000 / iXU 1000 / iXU 150 camera systems on the
DJI M600 and M600 PRO:
Phase One UAV Solution Accessory kit:
1 x Phase One Camera mount
4 x M4 screws with
4 spring washers and
4 flat washers
Connects the Phase One Camera System to the
DJI Drone
(see Step 6).
1 x iXU – DJI Communication cable
1 x M3 screw with
a single spring washer and
a single flat washer.
Connects communication cable between the
Phase One Camera System and the DJI Drone
(see step 3)
1 x iXU – DJI Power cable Provides power for Phase One Camera System
from DJI Gimbal
(see Step 7).
1 x HDMI (Male to Female)
extender cable
Provides HDMI streaming from Phase One
Camera System to the DJI drone
(see step 6).
iX Capture Mobile Software
Manuals
• iXU-RS 1000 / iXU 1000/ iXU 150 UAV Camera Systems
Installation Guide For DJI M600 & M600 PRO UAV
• iXU-RS Installation Guide
• iX Capture Mobile Software Manual
Recommended Reading List
• DJI M600 / M600 Pro Installation Manuals
• DJI Ronin Manual
• DJI Assistant 2 Manual

87
Introduction
This document describes the required procedures needed for
mounting the Phase One iXU-RS 1000 / iXU 1000 / iXU 150
UAV Camera Systems on the DJI M600 & M600 PRO.
Assembly Process
The following section describes the installation work flow
that is required for assembling /mounting the Phase One
Camera System on the DJI M600 / M600 PRO UAV:
Note: Assembly of the DJI M600 / M600 Pro and Ronin-MX
should be implemented according to their assembly manuals.
• Step 1: Installing the DJI UAV
• Step 2: Configuring the UAV for Communication with the
Phase One Camera System
• Step 3: Installing the iXU – DJI Communication Cable
• Step 4: Assembling the Ronin-MX Vibration Absorber
• Step 5: Assembling the Phase One Camera System in the
Ronin-MX
• Step 6: Connecting the Cables
• Step 7: Assembly Completion with Zip Tie
• Step 8: Configuring Phase One Camera to work with DJI UAV
• Step 9: Activation process
• Step 10: Calibrating the Ronin-MX
Step 1: Installing the DJI UAV
Unbox the M600/M600 PRO UAV and assemble it according
to the DJI Installation Manual.

109
Step 2: Configuring the UAV
for Communication with the
Phase One Camera System
1. Download DJI Assistant 2 from the DJI website and install
it on a PC.
2. Connect a USB cable between the PC and the UAV micro
USB port.
3. Turn ON the drone.
4. Start the Assistant 2 application.
The following screen is displayed when the UAV is connected.
5. Click the M600 icon. The following screen appears.
6. In the tree menu click 'SDK'. The following screen appears.
7. Configure the following fields:
• Select the 'Enable API Control' check box
• Select the 'Ground Station Status' check box
• Set the 'Baud Rate' to 115200
8. Exit the application.
9. Re-start the UAV in order for the changes to take eect.
Note: This procedure should be repeated if DJI UAV
Firmware was upgraded.

1211
Step 3: Connecting the
iXU – DJI Communication Cable
1. With the UAV standing the right way up, start the
installation by removing the top cover from the UAV.
2. Turn the UAV on its side, and remove the bottom cover.
3. Insert the iXU - DJI Communication cable through the
M600/M600 PRO body so that the DJI 4-pin connector is
routed through the available thread holes of the body of
the UAV (from the bottom up).
4. Once the cable is in place, connect the DJI 4-pin
connector to the SDK Port in the A3 Flight Controller, and
place the top cover back in its place.
5. Underneath the UAV, secure the small Communication
box with an M3 screw, a spring washer and a flat washer
next to the UAV USB port.
6. Place the UAV bottom cover back in its place.
7. Connect the power cable of the retractable module to the
XT30 power cable at the bottom of the DJI UAV
IXU – DJI
Communication cable Communication box
DJI 4-pin
connector
Lemo iXU
connector

1413
Step 4: Assembling the
Ronin-MX Vibration Absorber
Position the UAV on its back and connect the Ronin-MX
Vibration Absorber to the UAV according to the Ronin-MX
user manual.
Step 5: Assembling the
Phase One Camera System
into the Ronin-MX Gimbal
Mounting the Camera
1. Insert the four (4) x M4 screws with four (4) spring
washers and four (4) flat washers into the Phase One
Camera mount.
2. Assemble the camera mount on the camera and fasten
the screws.

1615
3. Attach the Camera Mounting Plate (part of the DJI Gimbal
kit) with a 3.8” camera screw (part of the DJI Gimbal kit)
to the Phase One Camera mount.
4. Attach the Camera Upper Mounting Plate (part of the DJI
Gimbal kit) to the DJI mount top section using the 2 small
screws under the flash hot shoe cover.
5. Facing outward on the tuning stand, slide the Phase One
Camera System into the receiver of the Ronin MX, until
the safety-locks engage. Adjust the vertical position of
the crossbar to meet the Camera Upper Mounting Plate.
When the Phase One Camera System in place, tighten the
camera base side clamp and lock-knobs.
Note: The camera should be placed upside-down so the
pitch-axis can rotate to -135 degrees. The Ronin-MX Gimbal
(including Phase One Camera) should be connected to the
DJI UAV according to the UAV and Ronin-MX assembly
instructions. Make sure the Ronin-MX safety lock is secured.
Mounting Plate
Upper Mounting Plate
Base side
clamp
Receiver of
the Ronin MX
Lock-knob
Safety Lock