Philips HTS5123 User manual

HTS5123
Registre seu produto e obtenha suporte em
www.philips.com/welcome
Manual del usuarioManual do Usuário
User manual

Responsabilidade Social
A Philips do Brasil LTDA é uma empresa
socialmente responsável, preocupada com a
valorização dos seus recursos humanos internos,
com o relacionamento correto e justo com
a comunidade, com o meio ambiente, com o
ambiente de trabalho e com o compromisso de
cumprimento das leis.
Sendo assim, realiza suas atividades em conformidade
com a norma SA-8000, que se baseia nos princípios
das convenções da Organização Internacional do
Trabalho, da Convenção das Nações Unidas sobre os
Direitos da Criança e na Declaração Universal dos
Direitos Humanos.
Informação ambiental
Todo o material desnecessário foi retirado da
embalagem do produto.
Nós tentamos fazer as embalagens de modo que elas
sejam fáceis de separar em três materiais: caixa de
papelão (caixa), calços de isopor e sacos plásticos.
O seu sistema contém materiais que podem ser
reciclados e usados novamente se desmontados por
uma empresa especializada. Por favor, observe os
regulamentos locais relacionados à disposição de
materiais da embalagem, baterias e equipamentos,
com relação à destinação no seu final de vida.
Prezado Consumidor,
PARABÉNS POR TER ADQUIRIDO ESTE
PRODUTO...
E BEM VINDO À FAMÍLIA PHILIPS.
Agradecemos pela sua confiança na Philips e temos a
certeza de que seu Sistema de Home Theater lhe trará
muitos momentos agradáveis, pois ele é um produto
de tecnologia moderna e com muitos recursos. Para
usufruir de todo seu potencial, basta ler atentamente
este manual e seguir as orientações dadas.
Atenciosamente,
Philips do Brasil LTDA
ADVERTÊNCIA: Cuidados com a utilização e
descarte de pilhas e baterias.
- Não descarte as pilhas e baterias
ao lixo doméstico.
- O descarte inadequado de pilhas e baterias pode
representar riscos ao meio ambiente e a saúde humana.
- Para contribuir com a qualidade ambiental e com sua
saúde, a Philips receberá pilhas e baterias fornecidas com
seus produtos após seu fim de vida. A Philips dispõe de
pontos de coleta em Assistências Técnicas que auxiliarão
- Para evitar o vazamento de pilhas ou baterias, o que
,otudorpoaesiatneibma,edúasàsonadmeratluseredop
recomendamos que: (i) Em caso de aparelhos com pilhas
removíveis, retire-as quando não estiver em uso por um
longo período, (ii) Não misture pilhas (antigas com novas
ou de zinco-carbono com alcalinas, etc.) (iii) Não exponha
o produto com pilhas/baterias em seu interior a altas
temperaturas.
- Em caso de dúvida ou consulta, favor ligar para
0800 701 0203 Brasil ou 2121 0203 Grande São Paulo ou
acessar o site http://www.philips.com.br
neste processo.
Baterias e Pilhas
juntamente
- Em caso de aparelhos com pilhas não removíveis,
promover o encaminhamento à assistência técnica Philips.
- Pilhas e bateiras usadas ou inservíveis recebidas pela
Philips serão encaminhadas à destinação ambientalmente
correta.
Programa Ciclo Sustentável Philips – Reciclagem de
aparelhos eletro-eletrônicos Philips pós-consumo
O seu produto Philips no final da vida útil pode ser
encaminhado a uma de nossas assistências técnicas
autorizadas para que tenha um destino ambientalmente
adequado já que os equipamentos eletro-eletrônicos não
devem ser descartados no lixo comum. O programa
também contempla o recolhimento de pilhas e baterias
portáteis de qualquer fabricante.
Iniciado em 2008, o Ciclo Sustentável Philips é o primeiro
programa corporativo que promove a reciclagem de
aparelhos eletro-eletrônicos no país, minimizando os
impactos ao meio ambiente. De um lado, a Philips entrega
produtos inovadores, sempre focando no compromisso
com a sustentabilidade. Do outro lado, você retorna o
produto para descarte, fechando um ciclo responsável.
A Philips sempre foi pioneira em Sustentabilidade dentre
as empresas do seu setor. Com essa iniciativa fortalec-
emos nossa responsabilidade ambiental e o compromisso
com a sociedade.
Para saber quais assistências técnicas autorizadas
participam do Programa Ciclo Sustentável, acesse nossa
homepage: http://www.sustentabilidade.philips.com.br.
Cover page_78_no paper recycle logo.indd Sec3:2Cover page_78_no paper recycle logo.indd Sec3:2 2/8/2012 5:24:00 PM2/8/2012 5:24:00 PM

1
English
EN
Contents
1 Help and support 2
FAQs 2
Contact Philips 2
2 Notice 2
Copyright 2
Compliance 2
Mains fuse (UK only) 3
Open source software 3
RMVB end user agreement (Asia Pacic
and China only) 3
Trademarks 4
3 Important 5
Safety 5
Care for your product 5
Care of the environment 6
4 Your SoundBar 6
Main unit 6
Remote control 7
5 Connect your SoundBar 8
Subwoofer 8
Connectors 9
Connect to TV 9
Connect audio from TV and other devices 10
Computers and the Internet 11
Name your SoundBar 13
6 Use your SoundBar 13
Adjust the volume 13
Choose your sound 14
USB storage devices 14
Audio, video, and picture options 15
Use smartphone 16
Share media through SimplyShare 18
EasyLink 20
7 Change settings 21
Picture 21
Sound 22
Language 23
Scan your USB storage device 23
DLNA DMR control 23
Energy saving 23
Apply factory settings 24
8 Update software 24
Check software version 24
Update software through the Internet 24
Update software through USB 25
9 Productspecications 25
10 Troubleshooting 28
11 Index 29

2EN
1 Help and support
Download a software update and nd answers to
many frequently answered questions (FAQs) on
your product at www.philips.com.
FAQs
If you have a problem, refer to the frequently
asked questions (FAQs) for this SoundBar at www.
philips.com/support.
If you still need help, contact Philips Consumer
Care in your country.
Warning
•Do not attempt to repair your SoundBar
yourself.This may cause severe injury, irreparable
damage to your SoundBar, or void your warranty.
Contact Philips
If you contact Philips, you will be asked for the
model and serial number of your product.The
model number and serial number are on the back
or bottom of your product. Note the numbers
before you call Philips:
Model No. __________________________
Serial No. ___________________________
2 Notice
This section contains the legal and trademark
notices.
Copyright
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
Copyright in the UK
Recording and playback of material may require
consent. See Copyright Act 1956 and The
Performers Protection Acts 1958 to 1972.
Compliance
This product is in compliance with the essential
requirements and other relevant provisions of
Directives 2006/95/EC (Low Voltage), 2004/108/
EC (EMC).
* Wireless and Ethernet LAN functions are
authorized for indoor use only.
Hereby, Philips Consumer Lifestyle, declares that
this product is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
A copy of the EC declaration of Conformity is
available in the Portable Document Format (PDF)
version of the user manual at www.philips.com/
support.

3
English
EN
Mains fuse (UK only)
This information applies only to products with a
UK mains plug.
This product is tted with an approved molded
plug. If you replace the fuse, use one with:
• the ratings shown on the plug,
• a BS 1362 approval, and
• the ASTA approval mark.
Contact your dealer if you are not sure about
what type of fuse to use.
Caution:To conform with the EMC directive
(2004/108/EC), do not detach the plug from the
power cord.
Open source software
Philips Electronics Singapore Pte Ltd hereby offers
to deliver, upon request, a copy of the complete
corresponding source code for the copyrighted
open source software packages used in this
product for which such offer is requested by the
respective licenses.This offer is valid up to three
years after product purchase to anyone in receipt
of this information.To obtain source code, please
contact [email protected]. If you prefer not
to use email or if you do not receive conrmation
receipt within a week after mailing to this email
address, please write to "Open Source Team,
Philips Intellectual Property & Standards, P.O. Box
220, 5600 AE Eindhoven,The Netherlands". If you
do not receive timely conrmation of your letter,
please email to the email address above.The texts
of the licenses and acknowledgements for open
source software used in this product are included
on a separate leaet.
RMVB end user agreement
(AsiaPacicandChinaonly)
Notes to End User:
By using this product with RealNetworks software
and services, the end user agrees to the following
terms of REALNETWORKS, INC:
• End User may only use the software for
private, non-commercial use in accordance
with the terms of RealNetworks EULA .
• End User is not allowed to modify, translate,
reverse engineer, decompile, dissemble or
use other means to discover the source
code or otherwise replicate the functionality
of the Real Format Client Code, except to
the extent that this restriction is expressly
prohibited by applicable law.
• RealNetworks Inc. disclaims all warranties
and conditions other than those set forth in
this Agreement which are in lieu of all other
warranties, whether express and implied,
including but not limited to any implied
warranties or conditions of merchantability
and tness for a particular purpose; and
effectively exclude all liability for indirect,
special, incidental and consequential damages,
such as but not limited to lost prots.

4EN
Trademarks
Android is a trademark of Google Inc. Use of this
trademark is subject to Google permissions.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.
and worldwide patents issued & pending. DTS,
the Symbol, & DTS and the Symbol together are
registered trademarks & DTS 2.0+Digital Out is a
trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
DivX , DivX Certied , DivX Plus HD
and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under
license.
ABOUT DIVX VIDEO: DivX is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an ofcial DivX Certied
device that plays DivX video.Visit divx.com for
more information and software tools to convert
your les into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND:This DivX
Certied device must be registered in order to
play purchased DivXVideo-on-Demand (VOD)
movies.To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go
to vod.divx.com for more information on how to
complete your registration.
HDMI, the HDMI logo, and High-Denition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC in the United
States and other countries.
The Wi-Fi CERTIFIED Logo is a certication mark
of the Wi-Fi Alliance.
DLNA , the DLNA Logo and DLNA CERTIFIED
are trademarks, service marks, or certication
marks of the Digital Living Network Alliance.

5
English
EN
3 Important
Read and understand all instructions before you
use your SoundBar. If damage is caused by failure
to follow instructions, the warranty does not apply.
Safety
Riskofelectricshockorre!
• Never expose the product and accessories to
rain or water. Never place liquid containers,
such as vases, near the product. If liquids are
spilt on or into the product, disconnect it
from the power outlet immediately. Contact
Philips Consumer Care to have the product
checked before use.
• Never place the product and accessories
near naked ames or other heat sources,
including direct sunlight.
•Never insert objects into the ventilation slots
or other openings on the product.
•Where the mains plug or an appliance coupler
is used as the disconnect device, the disconnect
device shall remain readily operable.
•Disconnect the product from the power
outlet before lightning storms.
•When you disconnect the power cord, always
pull the plug, never the cable.
Riskofshortcircuitorre!
•Before you connect the product to the power
outlet, ensure that the power voltage matches
the value printed on the back or bottom of
the product. Never connect the product to
the power outlet if the voltage is different.
RiskofinjuryordamagetotheSoundBar!
•For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the wall
mount. Koninklijke Philips Electronics N.V. bears
no responsibility for improper wall mounting
that results in accident, injury or damage.
•Never place the product or any objects on
power cords or on other electrical equipment.
•If the product is transported in temperatures
below 5°C, unpack the product and wait until
its temperature matches room temperature
before connecting it to the power outlet.
•Parts of this product can be made of glass.
Handle with care to avoid injury and damage.
Riskofoverheating!
•Never install this product in a conned space.
Always leave a space of at least four inches
around the product for ventilation. Ensure
curtains or other objects never cover the
ventilation slots on the product.
Riskofcontamination!
• Do not mix batteries (old and new or carbon
and alkaine, etc.).
• Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
• Remove batteries if they are exhausted or if
the remote control is not to be used for a
long time.
• Batteries contain chemical substances, they
should be disposed of properly.
Riskofswallowingbatteries!
• The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach of
children at all times! If swallowed, the battery
can cause serious injury or death. Severe
internal burns can occur within two hours of
ingestion.
• If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
• When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after you
replace the battery.
• If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
Care for your product
Use only microber cloth to clean the product.

6EN
Care of the environment
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences
for the environmental and human health.
4 Your SoundBar
Congratulations on your purchase, and welcome
to Philips! To fully benet from the support that
Philips offers, register your SoundBar at www.
philips.com/welcome.
Main unit
a Standby indicator
When the SoundBar is in standby, the standby
indicator turns red.
b Source indicator/Volume indicator
Source indicator lights up when a source is
selected.
When you change volume, volume indicators
light up to indicate the volume level.
• ARC: Lights up when you select HDMI
ARC as the input source.
• OPTICAL: Lights up when you select
Optical as the input source.
• AUX: Lights up when you select AUX as
the input source.
• COAXIAL: Lights up when you select
COAXIAL as the input source.
c Sound mode indicator/Volume indicator
Sound mode indicator lights up when a you
play an audio source with surround sound.
When you change volume, volume indicators
light up to indicate the volume level.
• DTS: Lights up when you play DTS audio.
• DOLBY D: Lights up when you play
Dolby audio.
• V.SURR: Lights up when you select Virtual
Surround sound.
1 2 3

7
English
EN
Remote control
a (Standby-On)
• Switch the SoundBar on or to standby.
When the SoundBar is in standby, the
standby indicator turns red.
• When EasyLink is enabled, press and hold
for at least three seconds to switch all
connected HDMI CEC compliant devices
to standby.
b USB
Switch to USB storage device.
c (Home)
Access the home menu.
d AUDIO
Select an audio language when you play a
video.
e Navigation buttons ( / / / )
Navigate menus.
f OK
Conrm an entry or selection.
g OPTIONS
Access more play options while playing a
multimedia le from a USB storage device or
PC (through DLNA).
h +/- (Volume)
Increase or decrease volume.
i (Play)
Start or resume play.
j (Pause)
Pause play.
k / (Fast Backward/ Fast Forward)
Search backwards or forward.
l ZOOM
Zoom into a video scene or picture.
m TREBLE +/-
Increase or decrease treble.
n BASS +/-
Increase or decrease bass.
o SOUND SETTINGS
Toggle through sound modes.
p SURROUND
Toggle between stereo and virtual surround
sound.
q SUBTITLE
Select subtitle language for video.
r / (Previous/Next)
Skip to the previous or next track, chapter
or le.
s (Stop)
Stop play.
t (Mute)
Mute or restore volume.

8EN
u BACK
Return to a previous menu screen.
v INFO
Display information about the current picture,
audio, or video.
w AUDIO SOURCE
• AUX: Switch your audio source to the
AUX connection.
• COAXIAL:Switch your audio source to
the coaxial connection.
• OPTICAL: Switch your audio source to
the optical connection. Press twice to
switch to HDMI ARC source when your
SoundBar is connected to the TV through
an HDMI ARC connection.
EasyLink controls
With Easylink, you can control your SoundBar,
TV and the connected devices with the standby
button on your SoundBar remote control.
• (Standby-On): Press and hold to switch
your SoundBar,TV, and the connected devices
to standby.
5 Connect your
SoundBar
This section helps you connect your SoundBar
to a TV and other devices. For a comprehensive
interactive guide, see www.connectivityguide.
philips.com.
Note
•For identication and supply ratings, refer to the
type plate at the back or bottom of the product.
•Before you make or change any connections,
make sure that all devices are disconnected from
the power outlet.
Subwoofer
Follow the steps below to position and connect
your subwoofer.
Position
Place the subwoofer at least one meter (three
feet) away from your SoundBar, and ten
centimeters away from the wall.
For best results, place your subwoofer as shown
below.

9
English
EN
Note
•The SoundBar and the subwoofer automatically
pair up when you switch on the SoundBar and
the subwoofer.
Connectors
Connect other devices to your SoundBar.
Side left
USB
Audio, video or picture input from a USB storage
device.
Back connectors
a AC MAINS~
Connect to the power supply.
b (Standby-On)
• Switch the SoundBar on or to standby.
• When the SoundBar is in standby, the
standby indicator turns red.
c DIGITAL IN - OPTICAL
Connect to an optical audio output on the
TV or a digital device.
d DIGITAL IN - COAXIAL
Connect to a coaxial audio output on the TV
or a digital device.
1
AC MAINS~
1 3 4
AUDIO IN
HDMI OUT (ARC) LAN
COAXIALOPTICAL
DIGITAL IN
AUX
LR
5 762
e AUDIO IN - AUX
Connect to an analog audio output on the TV
or an analog device.
f HDMI OUT (ARC)
Connect to the HDMI input on the TV.
g LAN
Connect to the LAN input on a broadband
modem or router.
Connect to TV
Connect your SoundBar to aTV to watch videos.
You can listen to audio from TV programs through
your SoundBar. Use the best quality connection
available on your SoundBar and TV.
Option 1: Connect to TV through HDMI
(ARC)
Your SoundBar supports HDMI version 1.4 -
Audio Return Channel (ARC). If your TV is HDMI
ARC compliant, connect your SoundBar to the TV
through the HDMI ARC connection.
With HDMI ARC, you do not need an additional
audio cable to play audio from TV through your
SoundBar.
(Cable not supplied)
1 Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your
SoundBar to the HDMI ARC connector on
the TV.
The HDMI ARC connector on the TV might
be labeled HDMI IN or HDMI. For details on
TV connectors, see the TV user manual.
2 On yourTV, turn on HDMI-CEC. For details,
see the TV user manual.
3 If audio from TV does not play automatically,
set up the audio manually (see 'Set up audio
for connected devices' on page 11).
TV

10 EN
Option 2: Connect to TV through HDMI
Best quality video
If yourTV is not HDMI ARC compliant, connect
your SoundBar to theTV through a standard
HDMI connection.
With a standard HDMI connection, you need an
additional audio cable to play the audio from the
TV through your SoundBar (see 'Connect audio
from TV and other devices' on page 10).
(Cable not supplied)
1 Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your
SoundBar to the HDMI connector on the TV.
The HDMI connector on the TV might be
labeled HDMI IN.
2 On yourTV, turn on HDMI-CEC. For details,
see the TV user manual.
3 To play audio from TV programs through
your SoundBar, connect an additional audio
cable (see 'Connect audio fromTV and other
devices' on page 10).
4 If audio from the TV does not play
automatically, set up the audio manually (see
'Set up audio for connected devices' on page
11).
TV
Connect audio from TV and
other devices
Play audio fromTV or other devices through your
SoundBar.
Use the best quality connection available on other
devices.
Note
•The audio connections in this user manual
are only recommendations.You can use other
connections too.
•When your SoundBar andTV are connected
through HDMI ARC, an audio connection is not
required.
Option 1: Connect audio through a digital
optical cable
Best quality audio
Using an optical cable, connect the OPTICAL
connector on your SoundBar to the OPTICAL
OUT connector on the device.
The digital optical connector might be labeled
SPDIF, SPDIF OUT, or OPTICAL.
(Cable not supplied)
TV

11
English
EN
Option 2: Connect audio through a digital
coaxial cable
Good quality audio
Using a coaxial cable, connect the COAXIAL
connector on your SoundBar to the COAXIAL/
DIGITAL OUT connector on the device.
The digital coaxial connector might be labeled
DIGITAL AUDIO OUT.
(Cable not supplied)
Option 3: Connect audio through analog
audio cables
Basic quality audio
Using an analog cable, connect the AUX
connectors on your SoundBar to the audio
connectors on the device.
(Cable not supplied)
VCR
Set up audio for connected devices
When you connect a device to your SoundBar,
check the audio settings.
1 On yourTV and other devices, turn on
HDMI-CEC. For details, see the user manual
of the TV and the other device.
2 Select 'Amplier' from the TV speakers menu
to hear sound from the SoundBar. For details,
see the TV user manual.
3 On your SoundBar, turn on System Audio
Control.
If the connected device is not HDMI-CEC
compliant, press the correct source button on the
remote control to select the audio input.
Computers and the Internet
Connect your SoundBar to your computer
network and the internet, and enjoy:
• Multimedia content streamed from your
computer: Play music, photo, and video from
a computer (see 'Browse PC from SoundBar'
on page 18).
• Multimedia content streamed from your
mobile device or tablet:Play music, photo,
and video from a mobile device or other
media server on your network (see 'Browse
a media server from mobile device' on page
19).
• Software update:Update the SoundBar
software through the network (see 'Update
software through the Internet' on page 24).
Caution
•Before you try to connect the SoundBar to
a computer network, familiarize yourself with
the network router, media server software
and networking principles. If necessary, read
documentation that accompanies the network
components. Philips is not responsible for lost,
damaged, or corrupt data.

12 EN
Wired connection
Connect your SoundBar to your router through a
network cable.
What you need
• A network router (with DHCP enabled).
• A network cable (RJ45 straight cable).
• Computer and mobile devices with media
server software installed.
• For software update, make sure that the
network router has access to the Internet,
and is not restricted by rewalls or other
security systems.
Set up the wired network
Connect your SoundBar to your router as shown
below, and then switch on the devices.
1 Connect the SoundBar to a network router
through a wired connection.
2 Turn on your TV, and switch to the correct
source for the SoundBar.
3 Press (Home).
4 Select [Setup], and then press OK.
5 Select [Network] > [Ethernet], and then
press OK.
6 Follow the instructions on the TV to
complete the setup.
» The SoundBar connects to the internet.
7 If connection fails, a failure message is
displayed on your TV. Press OK to return
to the previous menu, and then retry the
procedure.
LAN
Wireless connection
Connect your SoundBar to your router through a
wireless connection.
What you need
• A network router (with DHCP enabled). For
best wireless performance, coverage, and
compatibility, use 802.11n router.
• Computer and mobile devices with media
server software installed.
• For software update, make sure that the
network router has access to the Internet
and is not restricted by rewalls or other
security systems.
Set up the wireless network
Your SoundBar has a built-in Wi-Fi for easy access
to the wireless network. Connect your SoundBar
to your router as shown below, and then switch
on the devices.
1 Connect the SoundBar to a network router
through a wireless connection.
2 Turn on your TV, and switch to the correct
source for the SoundBar.
3 Press (Home).
4 Select [Setup], and then press OK.
5 Select [Network] > [Wireless], and then
press OK.
6 Follow the instructions on the TV to
complete the setup.
» The SoundBar connects to the internet.
7 If connection fails, a failure message is
displayed on your TV. Press OK to return
to the previous menu, and then retry the
procedure.

13
English
EN
Check network settings
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Network] > [Network Info], and
then press OK.
» The current network settings are
displayed.
Name your SoundBar
To easily identify your SoundBar on a network,
name your SoundBar.
1 Turn on your TV, and switch to the correct
source for the SoundBar.
2 Press (Home).
3 Select [Setup], and then press OK.
4 Select [System] > [Device Name], and then
press OK.
» A virtual keyboard is displayed on your
TV.
5 Press Navigation buttons and OK to enter
the name.
6 Select [OK] on the virtual keyboard to exit.
6 Use your SoundBar
This section helps you use the SoundBar to play
media from a wide range of sources.
Before you start
• Make the necessary connections as described
in the user manual.
• Complete the rst-time setup. First-time
setup appears when you turn on the
SoundBar for the rst time. If you do not
complete the setup, you are prompted
to complete it each time you turn on the
SoundBar.
• Switch the TV to the correct source for the
SoundBar.
Adjust the volume
Your SoundBar has incremental volume control.
When you change volume or mute your SoundBar,
one or multiple Volume indicator light up to
indicate the volume level.
• To increase or decrease volume, press +/-
(Volume).
• To mute sound, press MUTE.
• To restore the sound, press MUTE again or
press +/- (Volume).

14 EN
Choose your sound
This section helps you choose the ideal sound for
your video or music.
Sound mode
Select predened sound modes to suit your video
or music.
1 Press SOUND SETTINGS repeatedly to
select a sound setting:
• [Auto]: Automatically select [Movie] or
[Music] based on the sound stream.
• [Movie]: Enjoy a cinematic audio
experience, specially enhanced for movies.
• [Music]: Recreate the original recording
environment of your music, in the studio
or at a concert.
• [Original]: Experience the original sound
of your movies and music, without added
sound effects.
• [News]: Hear every word with optimized
speech and clear vocals.
• [Gaming]: Enjoy thrilling arcade sounds,
ideal for action-packed video games or
loud parties.
2 Press OK to conrm.
Auto volume
Turn the auto volume on to keep the volume
constant when you switch to a different source.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Press the Navigation buttons (up/down) to
select [Audio] > [AutoVolume] > [On].
4 Press OK to conrm.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1 Press SURROUND repeatedly to select a
surround mode.
• [Virtual Surround]: Creates a highly
compelling 5.1 channel listening
experience.The sound mode indicator
on the main unit lights up.
• [Stereo]:Two-channel stereo sound. Ideal
for listening to music.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
Press TREBLE +/- or BASS +/- to change the
frequency.
The DTS indicator blinks when you press TREBLE
+/- or BASS +/-.
Synchronize picture and sound
If the audio and video are not synchronized, delay
the audio to match the video.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Press the Navigation buttons (up/down) to
select [Audio] > [Lip Sync], and then press
OK.
4 Select one of the following options, and then
press OK:
• [Auto]: For an HDMI connection,
automatically adjust the audio delay.
• [Manual]: Press the Navigation buttons
(up/down) to manually adjust the audio
delay.
• [Off]: Disable automatic adjustment of
audio.
5 Press OK to conrm.
USB storage devices
Enjoy pictures, audio and video on a USB storage
device.
What you need
• A USB storage device that is formatted for
FAT or NTFS le systems, and complies with
the Mass Storage Class.
• A USB extension cable, if the USB storage
device does not t into the connector.
Note
•You can use digital cameras connected by USB
if they can play the les without using a special
computer program.
•To play DivX DRM - protected les from a USB
storage device, connect your SoundBar to a TV
through an HDMI cable.

15
English
EN
Playles
1 Connect the USB storage device to the
SoundBar.
2 Press USB.
» The content browser is displayed.
3 Select a le, and then press OK.
4 Press the playback buttons to control play
(see 'Play buttons' on page 15).
Play buttons
Button Action
Navigation
buttons
Navigate menus.
OK Conrm an entry or selection.
(Play)Start or resume play.
Pause play.
Stop play.
/ Skip to the previous or next
track, chapter or le.
/ Search backwards or forward.
Navigation
buttons (up/
down)
Rotate the picture counter-
clockwise or clockwise.
SUBTITLE Select subtitle language for
video.
OPTIONS Access more play options while
playing a multimedia le.
For video formats such as DivX and WMV:
• To stop play, press .
• To resume the video from where you
stopped, press (Play).
• To play the video from the start, press OK.
DivX
Play DivX videos from a USB storage device.
Note
•To play DivX DRM protected les from a USB
storage device, connect your SoundBar to a TV
through an HDMI cable.
VOD code for DivX
Before you purchase DivX videos and play them,
register the SoundBar on www.divx.com using the
DivX VOD code.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Miscellaneous] > [DivX(R)VOD
Code], and then press OK.
» The DivX VOD registration code for
your SoundBar is displayed.
Subtitles
If your video has subtitles in multiple languages,
select a subtitle language.
1 While playing video, press SUBTITLE to
select a language.
Note
•Make sure that the subtitle le has the same
name as the video le. For example, if the video
le is named 'movie.avi', save the subtitle le as
'movie.srt' or 'movie.sub'.
•You can play subtitle les in the following
formats: .srt, .sub, .txt, .ssa, .ass, smi, and .sami.
These les do not appear in the le navigation
menu.
Audio, video, and picture
options
Use advanced features when you play audio,
video, or media les from a USB storage device or
network media server (through SimplyShare).
Audio options
While playing audio, repeat an audio track or a
folder.
1 Press OPTIONS repeatedly to cycle
through the following functions:
• [Repeat One]: Repeat the current track
or le.
• [Repeat All]: Repeat a selected folder.
• [ShufeLoop]: Play audio tracks in
random order.
• [Repeat Off]:Turn off the repeat mode.

16 EN
Video options
While watching video, select options such as
subtitles, audio language, and video settings.
Depending on the video source, some options are
not available.
1 Press OPTIONS.
» The video options menu is displayed.
2 Press the Navigation buttons and OK to
select and change:
• [Audio]: Select audio language for video.
• [Subtitle]: Select subtitle language for
video.
• [GoTo]: Skip to a specic part of the
video by entering the time of the scene.
• [Repeat Title]: Repeat a title.
• [Repeat All]: Repeat all the tracks.
• [Repeat Off]:Turn off the repeat mode.
• [Video Setting]: Adjust the video output.
Picture options
While viewing a picture, add animation to a
slideshow or change the picture settings.
1 Press OPTIONS.
» The picture options menu appears.
2 Press the Navigation buttons and OK to
select and change the following settings:
• [Video Setting]: Adjust the video output.
• [Background Music]: Select the music
track.
• [Slide Timing]: Select the display speed
for each picture in a slide show.
• [Slide Transition]: Select the transition
type for slideshow.
• [ShufeLoop]:Play pictures in random
order.
• [Repeat All]: Repeat a selected folder.
• [Repeat Off]:Turn off the repeat mode.
Slideshows
While playing audio, access fun features such as
picture and musical slideshows.
Picture slideshows
View a slideshow of your pictures stored in your
USB storage device or network media server.
1 Select a picture from the USB storage device
or network media server, and then press
(Play).
2 Press OPTIONS.
3 Press Navigation buttons and OK to select
the following settings:
• [Slide Transition]: Select the transition
type for slideshow.
• [Slide Timing]: Select the display speed
for each picture in a slide show.
4 Press to stop the slideshow.
Musical slideshows
Create a musical slideshow to play music and
pictures at the same time.
1 Select a music track, and then press OK.
2 Press BACK, and go to the picture folder.
3 Select a picture, and then press (Play) to
start the slideshow.
4 Press to stop slideshow and music.
Use smartphone
Turn your iPhone or Android smartphone into
a virtual remote control, or use it to browse
the contents of a USB storage device on your
SoundBar.
What you need
• An iPhone (iOS 3.1.3 and above) or Android
(Android 2.1 and above) smartphone.
• A wired or wireless home network.
Before you start
• Connect your SoundBar to your home
network (see 'Computers and the Internet'
on page 11).
• Name your SoundBar (see 'Name your
SoundBar' on page 13).
• Connect your smartphone to the same home
network. For details, see your smartphone
user manual.

17
English
EN
Download MyRemote application
Download the Philips application, MyRemote
(MyRemote) to your smartphone.This application
is free.
Note
•Philips MyRemote is only available for iPhones
and Android smartphones.
1 Tap the App Store (App Store) icon on the
iPhone or the Market (Market) icon on the
Android smartphone.
2 Search for 'Philips MyRemote' application.
3 Follow the instructions on your smartphone
to download the application.
» The MyRemote (MyRemote) icon is
added to the home screen of your
smartphone.
Access MyRemote application
Access the MyRemote application from your
smartphone, and then identify your SoundBar on
the home network.
1 Tap MyRemote (MyRemote) on your
smartphone.
» Your SoundBar and the other devices
on the network are displayed on your
smartphone. A browsing bar with
Devices, Remote, and Source tabs is also
displayed.
2 If your SoundBar is not found, check the
network connection.
Then, tap the Devices (Devices) tab on your
smartphone to search again.
3 Tap the SoundBar icon on the smartphone.
» The virtual remote control is displayed
on the smartphone.
4 To exit the application, press the home
button on your smartphone.
Use your smartphone as a remote
control
The virtual remote control is displayed in multiple
screens on the smartphone.To access the buttons,
swipe the smartphone screen to the left or right.
Only the control buttons that are relevant to the
play mode are enabled on your smartphone. For
example, if you play pictures, only the remote
control buttons that are used to control the
pictures are enabled. However, if you play a video,
additional buttons, such as SUBTITLE are enabled
on your smartphone.
1 Launch the application on your smartphone.
» Depending on the play mode, the
relevant remote control buttons are
enabled.
2 If the remote control buttons do not appear,
tap the Remote (Remote) tab on your
smartphone.
3 Swipe to the left or right screen to access
more buttons.
Note
•Some control functions are not available on
smartphones.
Browse a USB storage device
Browse a USB storage device from your
smartphone, and play an audio, video, or
multimedia le.
1 Launch the remote control application on
your smartphone.
2 Connect a USB storage device to your
SoundBar.
3 On your smartphone, tap the Source
(Source) tab, and then select USB (USB).
» The folders in your USB storage device
are displayed.
4 Select a folder to browse, and then select a
le to play.
» The relevant remote control buttons are
enabled on your smartphone.
5 To access the remote control while you
browse the contents, tap the Remote
(Remote) tab on your smartphone.

18 EN
Share media through
SimplyShare
When you connect your SoundBar to your home
network, you can enjoy music, photo, and video
stored on a computer or other media server on
the network through SimplyShare.
With SimplyShare, you can:
• select and play media stored on a computer
through your SoundBar,
• select media stored on a mobile device and
play it on your SoundBar, and
• use your mobile device as a controller to
select content from a media server, and play
it on your SoundBar.
The media server can be set up on any
DLNA-compatible device such as a computer,
smartphone, or tablet.
Note
•You cannot share copyright protected content
through SimplyShare.
What you need
• A wired or wireless home network,
connected to a Universal Plug and Play
(uPnP) router. For best wireless performance,
coverage, and compatibility, use 802.11n
router.
• A LAN cable to connect your SoundBar to
your home network.
• A media server software such as:
• PC running Windows Media Player 11 or
higher, or
• Mac running Twonky Media Server, or
• Mobile devices with media sharing
applications.
Note
•There are numerous media servers in the
market for computers and mobile devices.These
media servers support variety of devices, media
types, and operating systems. Select a media
server based on the device, operating system,
and your needs.
Before you start
• Connect your SoundBar to your home
network. For best performance, connect the
SoundBar through a wired network (see
'Computers and the Internet' on page 11).
• Connect your computer and other DLNA-
compatible mobile devices to the same home
network. For details, see the user manual of
the device.
• Make sure that the PC rewall allows you to
run the media server software.
• Make sure that the devices supports DLNA
or media sharing (iOS) features.
• Switch on the devices and the router.
Browse PC from SoundBar
From the SoundBar home menu, access the media
les on your computer and share them through
SimplyShare.
To enable media sharing, set up the media server
software on your computer.
Set up media server software
Some examples of media servers are as follows.To
use other media servers, see the web site of the
media server.
Microsoft Windows Media Player 11
1 Start Windows Media Player on your PC.
2 Click the Library tab, and then select Media
Sharing.
3 The rst time you select Media Sharing on
your PC,a pop-up screen appears. Check the
Share my media box and click OK.
» The Media Sharing screen is displayed.
4 In the Media Sharing screen, make sure that
you see a device marked as Unknown Device.
» If you don't see an unknown device
after a minute or so, check that your PC
rewall is not blocking the connection.
5 Select the unknown device and click Allow.
» A green tick appears next to the device.
6 By default,Windows Media Player shares
from these folders: My Music, My Pictures,
and MyVideos. If your les are in other
folders, select Library > Add to Library.
» The Add to Library screen is displayed.
• If necessary, select Advanced options to
display a list of monitored folders.
7 Select My folders and those of others I can
access, and then click Add.
8 Follow the onscreen instructions to add the
other folders that contain your media les.