3
Product Features
1. Webcam Stand Length: Gooseneck arm can be extended to the max
approx. 15 in.(38cm)
2. The max thickness 2 in.(5cm) of the clamp make the webcam stand fit for the desk,
table, sideboard, bed.
3. It is only suitable for the webcam with standard 1/4in screw thread. Before you place
your order, please make sure your webcam comes with this standard 1/4in screw thread.
It is not suitable for the webcam without 1/4in screw thread.
4. 360° swivel ball head allows your webcam to rotate to get different best angles.
Note: Recommend to put the jaws flex clamp mount on a stable non-moving object, not
on something that vibrates, or it’s hard to maintain high quality picture effects. And not
for heavy camera and devices.
Specifications:
Product Parts
Model: PIWS02
Color: Black
Main Material: Metal+plastic
Item Weight: Approx. 0.3kg
Item Length: Approx. 15 in.(38cm)
Max load weight 0.9 kg (1.98 lb)
1
2
3
4
5
6
7
8
Desk Clamp
Hollow Ring
Screw Thread
Slot
Clasp
Fixation Pin
Iron Tube
Swivel Head
Assembly Instruction
Step 1: Put the hollow ring set in the swivel head.
Step 2: Fix in the slot on the top of the swivel head.
Step 3: Knob tightly the hollow ring up to the bottom of the slot.
Step 4: Insert clasp into the slot, please try to find the best cut on both
- sides if you install it for the first time.
Step 5: Insert the screw head at the top of the slot, and align the hole.
Step 6: Put the fixation pin in the hole and knob to tighen it.
Step 7: Secure the iron tube to the desk clamp.
Step 8: Secure the desk clamp to the desk.
Step 5 Step 6
01 02
