
2
Umbrella with Holder Stand Setup
Place the umbrella stand on the cart with the
base plate and bolt it to match several
threads.
Note: Drill 4 holes (11/32" is a good t) in
the top shelf of your cart and bolt the base
plate to your cart using 5/16-18" CSK/
Countersunk bolts.
Aer inserng the bolt into the base plate,
secure it using an allen key. Next, loosen the
bolt slightly from the top of the umbrella
stand, as shown in the image.
Note: 48 threaded mounng points in 1/4-
20" and 3/8-16" sizes on the umbrella
holder's base plate allows for rigging
Monitors, Lights, etc.
Insert the umbrella into the umbrella stand
and secure it with the help of an allen key.
To move the umbrella, press the buon as
shown in the picture.
Aer pressing the buon, you can lt the
umbrella to the right and le sides.
Note: The Proaim cart umbrella is a must-have
designed to keep your equipment dry in the
rain, snow and cool in the harsh sunlight. It ts
with the holder stand.