PULUZ U6000 User manual

1
HD Multi-function Sport Action Camcorder
2
3
U6000
4
5
Manual
6
7
8
9
10

1
Table of Contents
1
I. The Basics ---------------------------------------------------------------------------2
2
II. Getting Started -------------------------------------------------------------------4
3
III. Camera Modes -------------------------------------------------------------------6
4
IV. Video Mode -----------------------------------------------------------------------7
5
V. Photo Mode -----------------------------------------------------------------------8
6
VI. Playback Mode ------------------------------------------------------------------8
7
VII. Setup Mode -----------------------------------------------------------------------9
8
VIII. Connecting to the PULUZ APP -------------------------------------13
9
IX. Transferring Files to a Computer -------------------------------------------14
10
X. Battery --------------------------------------------------------------------------------14
11
XI. Camera Housing -----------------------------------------------------------------17
12
XII. Customer Support ---------------------------------------------------------------19
13
14

2
Ⅰ. The Basics
1
2
3

3
1. Camera Lens
1
2. USB／SD/HDMI Cover
2
3. 2.0 Inch 16:9 TFT LCD Camera Status Display Screen
3
4. Battery Cover Key
4
5. Battery Cover
5
6. Camera Status Light (Green) and Shutter/Select Button『 』
6
7. Camera Status Light (Green)
7
8. Menu UP Button
8
9. Power / Mode Button 『』
9
10. WI-FI Light (Green) and WI-FI Button『 』
10
11. Speaker Port
11
12. Menu Down Button
12
13. Charge Status Light (Red)
13
14. Microphone
14
15. Micro SD Card Slot
15
16. Micro SD Card(Micro SD not included)
16
17. Mini-USB Port
17
18. Micro HDMI Port (Cable not included)
18
19
20
21

4
Ⅱ. Getting Started
1
Charging the Battery
2
1. Remove the camera from its housing.
3
2. Remove the camera side door and insert a Micro SD card (sold
4
separately). The card must have a Class 10 or UHS-1 rating an
5
d a capacity up to 64GB.
6
3. Open the battery cover, insert the battery and then close the
7
battery cover.
8
4. Charge the battery by connecting the camera to computer or
9
other USB charging adapter by using the included USB cable. T
10
he Charge Status Light turns on during charging and turns off a
11
utomatically when charging is completed.
12
NOTICE: Using a wall charger other than a normal standard 5V 1A wall
13
charger can damage the PULUZ battery. Only use chargers marked:
14
output 5V 1A. If you do not know the voltage and current of your
15
charger, use the included USB cable to charge the camera from
16
your computer.
17
5. When charging with a computer, be sure that the computer is
18
connected to a power source. If the Charge Status Light does not
19
turn on, use a different USB port.
20
The included lithium-ion battery comes partially charged. No damage
21
occurs to the camera or battery if used prior to a full charge
22

5
1
WARNING: Use caution when using your PULUZ sport camera as part of
2
your active lifestyle. Always be aware of your surroundings to avoid
3
injury to yourself and others. Abide by all local laws when using your
4
sport camera and related mounts and accessories.
5
POWERING ON/OFF
6
To Power On:
7
Press the Power/Mode button [『 』once. The camera status LED (red)
8
on. When the camera status screen displays information, your camera is
9
on.
10
To Power Off: 
11
Press and hold the Power/Mode button [ ]. The camera status lights
12
(red)off.
13
INSERT+REMOV MICRO SD CARD
14
The PULUZ camera is compatible with 2GB, 4GB, 8GB, 16GB, 32GB and
15
64GB capacity micro SD memory cards (sold separately). You must use
16
a micro SD card with a Class 10 or a UHS-1 rating. PULUZ recommends
17
using branded memory cards for maximum reliability in high-vibration
18
activities.
19
To insert the micro SD Card:
20

6
Slide the memory card into the card slot with the label facing the back
1
of the camera. When fully inserted, the card clicks into place.
2
3
To remove the micro SD Card:
4
Place your fingernail against the edge of the memory card and lightly
5
press it further into the camera. The card springs out far enough to be
6
removed.
7
NOTICE: Be careful when handling memory cards. Avoid liquids, dust
8
and debris. As a precaution, power off the camera before inserting or
9
removing the card. Check manufacturer guidelines regarding use in
10
acceptable temperature ranges.
11
12
Ⅲ. Camera Modes
13
The PULUZ features several camera modes. To cycle modes, press the
14
Power/Mode button 『 』repeatedly.
15
These modes appear:
16
Video
Record video

7
Photo
Capture photo
Playback
Play back videos and photos
Setup
Adjust general camera settings
1
Ⅳ. Camera Video Modes
2
Recording Video
3
1. Camera default Mode or Press the Power/Mode button 『 』
4
repeatedly until you get to video mode.
5
2. Press the Shutter/Select button 『 』.The camera beeps once and
6
the camera status lights flash while the camera is recording.
7
3. To stop recording, press the Shutter/Select button『 』.The camera
8
status lights off.
9
If the memory card is full or the battery is out of power, your camera
10
automatically stops recording. Your video is saved before the
11
camera powers off.
12

8
1
Ⅴ. Photo Modes
2
Photo mode contains two capture modes: Single and Continuous:
3
Capture Mode
Description
Single (default)
Captures a single photo.
Continuous
In the "setup" menu in the photo set
CAPTURING A SINGLE OR CONTINUOUS PHOTO
4
1. Select the desired photo capture mode (Single or Continuous)
5
2. Press the Shutter/Select button『 』. The camera beeps, the camera
6
status lights flash and the state of the camera screen display photos
7
8
Ⅵ. Playback Modes
9
PULUZ camera direct playback or play back your content on a
10
computer, TV, smartphone or tablet (using the PULUZ App).
11
You can also play back content by inserting the micro SD card directly
12
into a device, such as a computer or a compatible TV. With this method,
13
playback resolution depends on the resolution of the device and its
14
ability to play back that resolution. For best results playing back your
15
content on a computer.
16
To Play Back Content on Your Computer:
17

9
1. Connect the camera to your computer using the included USB cable.
1
2. Copy the files to your computer or external hard drive.
2
PLAYING BACK VIDEOS AND PHOTOS ON YOUR TV
3
Play back videos and photos on your TV/HDTV requires a micro HDMI,
4
composite or combo cable (all sold separately).
5
To Play Back Content on a TV:
6
1. Plug the camera into a TV/HDTV with a micro HDMI cable,
7
composite cable or combo cable.
8
2. Select the input on your TV that corresponds to the port into which
9
you plugged the cable.
10
3. Power on the camera.
11
Press the Power/Mode button『 』to cycle to Playback 『 』mode,
12
and then press the Shutter/Select button『 』to select it.
13
4. Use up button and down button to navigate backward and forward
14
to see more media files on your memory card.
15
Note: HDMI playback depends on the resolution of the device, and is
16
certified up to 1080p.
17
18
Ⅶ. Setup Mode
19