QYSEA FIFISHV-EVO User manual

FIFISH V- EVO
Quick Start Guide
V 1.0

1
Thank you for choosing FIFISH as your underwater exploring kit. This
Quick Start Guide will help you learn and operate FIFISH V-EVO, the 1st
compact size OMNI-directional ROV.
Safety and Regulations
Operating FIFISH products requests training and practice. Please read through
this document before operating in water.
Do NOT touch the running
propeller
Beware of the environment while
operating the ROV (tide, water
level, water traffics, etc.)
Do NOT throw the ROV when
deploying into the water
Avoid overheating of motors, do
NOT run the thrusters in air for
over 30 seconds
Do NOT look directly to the LEDs,
and do NOT touch the LEDs when
they are ON.
Be part of marine protection and
conservation for the local coral and
marine life
Avoid the reefs, rocks, seaweeds,
fishline or other objects that may
cause damage to or entanglement
of the ROV or tether
Maintain after dive, check the
Maintenance Guide

2
Introduction
About FIFISH V-EVO
FIFISH V-EVO is the first underwater drone to combine a 4K · 60FPS high frame-
rate camera with 360-degree autonomous movements, giving you the ability to
create their own unique and cinematic underwater films and explorations.
Compact drone robotics and AI black technologies converge together to deliver a
newly-immersive underwater experience. Break through the limits of traditional
dive photography, and discover thrilling worlds below the depths with FIFISH V-
EVO.
ROV (Remotely Operated underwater Vehicle)
1
3
3
3
4
2
5
6
7
8
1. 4K Underwater Camera
2. 2,500 lumens LED × 2
3. Thrusters × 6
4. Rear Wing1,2
5. Vent Holes
6. Mounting Port
7. Q-interface
8. ROV Tether Port
Note:
1. Do NOT shake or swing while holding the rear wing
2. Make sure hook the loop of tether on the stem of rear wing when connect
(See Preparation and Connection / Hardware Connection )

3
RC (Remote Controller)
3
1
2
4
5
8
7
6
9
10
11
12
13
14
15
16
17
1. Left Control Stick
2. Thrusters LOCK/UNLOCK
3. Right Control Stick
4. ON/OFF
5. Depth Holding (ON/OFF)
6. Take Picture
7. Right Wheel
8. LED Brightness (OFF, 1, 2)
9. Ethernet port
10. Tether Port (3.5 mm head port)
11. Control Mode (Attitude / Sport
/ Combine)
12. Video Record/Stop
13. Left Wheel
14. Charging Port
15. Micro SD Slot
16. Clamp Release Button
17. Clamp for Smart Device

4
Spool and Tether
3
1
2
4
5
1. Spool Handle
2. Tether Regulator
3. Foldable Handle
4. Tether Plug
5. Spool Frame
6. Controller Plug
6

5
Preparation & Connection
Charging
1. ROV Charging (Please charge the ROV and remote controller for the first use)
Charging Full
RED LED indicator illuminates while charging and green LED indicator
illuminates while fully charged.
2. RC Charging
Flashing POWER button, RC is charging,
White steady POWER button, RC is fully charged.
Red, less than 30%
Yellow, 30% to 70%
White, 70% or higher
Press the power
button to check the
battery level

6
Install FIFISH APP
1. APP download & Installations
Option 1. Scan the QR code below to download FIFISH APP.
Option 2. Search the FIFISH on App Store (iOS) or GooglePlay (Android).
Option 3. Go to QYSEA website (www.qysea.com) support/APP download
2. Hardware connection
Overview of Hardware connection

7
A. Plug the tether (3.5 mm head) into remote controller
B. Take off the protect cap, tie the knot around the rear wing
C. Plug the tether (ROV end) into the ROV, the ROV will automatically
turn on. The music will play 5 chimes: (Do, Re, Mi, Do, Mi)

8
D. Turn ON the remote controller. Press and hold the ON/OFF button,
until you hear 7 low to high chimes (Do, Re, Mi, Fa, Sol, La, Si)
E. The “ON/OFF”, “Depth Holding” and “LOCK/UNLOCK” will rotate
clockwise, which indicates “Ready to be connected”