Rain Bird Root Watering System User manual

How to select and install a
Root Watering System
The Rain Bird RootWatering System (RWS) consists of a perforated polyethylene cylinder
with 14,000 openings to eectively deliver water, air and nutrients to the root system of
trees and shrubs. It easily connects to irrigation lateral lines or can be installed in drip zones.
It is available in 3 sizes: 36", 18" and 10".
Benets include:
• Optimal growth rates – Deeper root growth and root mass means a healthier,
faster growing tree
• Investment protection – Healthier roots help trees survive transplanting
and provide stability in high winds
• Watering eciency – Subsurface irrigation minimizes run-o and evaporation
• Landscape aesthetics – Installs at grade and helps minimize damage to hardscapes
Easy to install in just 3 simple steps:
1Choose correct RWS units
2Determine number of units per tree/shrub
3Space appropriately
Dig hole and insert
tree/shrub before
installing RWS to avoid
damage to units.
Keep RWS top even with
ground surface.
Keep RWS on its own
irrigation zone.
SEE PAGE 2 FOR DETAILED INSTRUCTIONS
Installation Instructions

Rain Bird Corporation
6991 E. Southpoint Road
Tucson, AZ 85756
Phone: [phone]
Fax: [phone]
Rain Bird Technical Services
(800) RAINBIRD (1-800-724-6247)
(U.S. and Canada)
www.rainbird.com
® Registered trademark of Rain Bird Corporation
© 2016 Rain Bird Corporation 5/16
Installation Instructions
Step 1:
Select the correct RWS product.
Choose a bubbler ow rate appropriate
for your soil type.
RWS Installation Steps
The size of the root ball will drive the
correct type, quantity and positioning
of the RWS units.
Step 2:
Determine number of units
per tree/shrub.
Step 3:
Space relative to root ball.
SMALL TREES & LARGE SHRUBSLARGE TO MEDIUM TREES SHRUBS & SMALL TREES
Root Ball Dia.
> 36"
RWS
Root Ball Dia.
12" – 36"
Root Ball Dia.
< 12"
RWS-M
2 RWS-S
Per Shrub
NOTE: If less than 12" apart, use
1 RWS-S between each root ball.
2 RWS-M
Per Tree/Shrub
3 or more RWS
Per Tree
Isolated Shrub:
2 RWS-S equally spaced around root ball.
Dense Plantings:
1 RWS-S between each plant.
Equally spaced around root ball.Equally spaced around root ball with no
more than 30" between each RWS unit.
36" 18" 10"
RWS-S
D40932
FOR MORE INFORMATION:
www.rainbird.com/rws