recke TVD32A1000T2 User manual

We sincerely hope the TV brings you the brand new visual and audio enjoyment.This operating instructions can help you operate this TV set easily. Read this manual before operating the unit for being WELCOME YOU TO PURCHASE OUR LED TVWelcome to high quality image world of our color LED TV familiar with its features and keep it for future reference.

1In case of smoke, strange noise or strange smell from the unit: Turn off the power switch immediately; Disconnect the power plug from the power outlet; Contact your dealer or service centre. Never attempt to make repairs yourself because this could be dangerous.High Voltage Do not openRisk of electronic shock, do not open.Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.CAUTIONImportant Safety InstructionsNever push objects of any kind into the set through the cabinet slots as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the set. Use special caution in households where children are present. The apparatus is not suitable for children under 3-year to operate.Power supply cords should be routed safety to prevent life and property from dangerous with damaged cord.Mains plug is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. To be completely disconnected the apparatus from supply mains, the mains plug of the apparatus shall be disconnected.The apparatus shall be connected to a mains socket outlet with a protective earthing connection.To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. To avoid the fire, no naked flame source, such as lighted candles, should be placed on the apparatus.Important Safety Instructions and Maintenance

2Important Safety InstructionsAlways turn the set off when it is not being used. Unplug the apparatus from the AC outlet when it will not be used for a long period of time. And when there is a lightning, unplug the unit from the AC outlet immediately. Never touch the antenna wire during lightning.An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care shold be taken to keep from touching such power lines or circuits as contact with them might be fatal.InstallationThe ventilation should not be impeded by covering the ventilation opening with items, such as newspapers, tablecloths, curtains, etc.At least 10 cm space should be left around the apparatus for sufficient ventilation.The product should be situated away from heat sources such as radiators,heat registers, stoves, or other products (including amplifiers) that produce heat.Place the apparatus in such a position that the screen is not exposed to direct sunlight. It is best to have soft indirect lighting while watching and avoid complete dark environment and reflection from the screen as these may cause eye fatigue.Keep the product away from high magnetic field (i.e. power-amplified power speaker) to avoid affecting the tint;Do not pull the plug out by the wire;Never touch the plug with wet hands.Excessive sound pressure from earphones and headphones can cause hearing loss.Important Safety Instructions and Maintenance

3Important Safety Instructions and MaintenanceInstallationDo not place this apparatus near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or a swimming pool; and the like;CleaningWhen the TV being moved in from cold place, it needs some right time for dew inside unit evaporating fully before turn on the unit;Unplug this apparatus from the AC outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning;Do not place the set on an unstable cart, stand, tableor shelf. The set may fall, causing serious personal injury as well as damage to the product. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.Move

4
Welcome you to high quality image world our color LED TV brings you. We sincerely hope the TV brings you the brand new visual and audio enjoyment.This operating instructions can help you operate this TV set easily.Read this manual before operating the unit for being familiar with its features and keep it for future reference.
Welcome you to purchase our LED TV
IntroductionFeatures............................................................................................................................Specifications....................................................................................................................External ConnectionStand and wall-mounted...................................................................................................General DescriptionOverview of front and side panel......................................................................................Overview of back panel....................................................................................................Overview of remote control...............................................................................................Teletext..............................................................................................................................General DescriptionInstalling Batteries in the Remote Control........................................................................External Connection Antenna connection..........................................................................................................Connecting VCR...............................................................................................................Connecting a Camcorder..................................................................................................Connecting a DVD Player/Set-Top Box............................................................................Connecting a DVD Player/Set-Top Box via DVI ..............................................................Connecting DVD Player/Set-Top Box via HDMI .............................................................Connecting Digital Audio System....................................................................................Connecting PC................................................................................................................Supporting signals.........................................................................................................Basic OperationTurning the TV On and Off...............................................................................................Menu operation................................................................................................................Menu system instruction...............................................................................................Digital Media Player.......................................................................................................ReferenceTroubleshooting...............................................................................................................Picture defects and the reason........................................................................................Accessories......................................................................................................................
Table of Contents
567101112141616171819202122232324252737464747

5
FeaturesIntroduction
● TV adopts 32"/42" LED display screen.● Low power consumption complied with energy saving Standard.● Backlight adjustable protects your eyes, saves energy and extends the life time. ● HDMI port (official HDCP inside) with legal unlimited use.● Embedded multimedia player (support MPEG, MKV).● Multi-language OSD.● Auto tuning and fine tuning.● Programmable Auto On/Off.● Multi-language subtitle.● Support USB 2.0/HDMI 1.4.Input terminals used for external equipment connection1 x ANTENNA jack 2 x HDMI inputs2 x USB inputs 1 x COMPONENT input 1 x AV input 1 x Headphone output 1 x SPDIF output 1 x VIDEO output1 x PC input

6Note:1. Due to TV may be used with different display screen, weight marked in this user's manual or in packaging box are subject to change without notice.2. In case of any design change, a notice will not be released.
IntroductionSpecifications
736x75.4x443.5mm6.2Kg7.3Kg736x180x496.5mm
Display sizeLED panel resolutionPower supplyTV receive systemFrequency rangeVideo inAntenna InputSpeaker output powerPower consumptionStandby consumptionWork TemperatureModelController power
≥X25W55Woo0C-40C≤0.5W~110-240V, 50/60Hz
75 ohms, unbalancedDC 3V (Two AAA size batteries)
Digital: 5-12, 21-69Analog: 46.25MHz-855.25MHzPAL/NTSC/SECAMDigital: DVB-T DVB-T2Analog: PAL D/K,B/G,I SECAM D/K,B/GA1000 32" DTV DVB-T2
32” Diagonal (max.)
1366X768A1000 42" DTV DVB-T2
42” Diagonal (max.)
956x80x567mm9.4Kg11.7Kg956x240x622mm90W1920X1080

7
External ConnectionStand and wall-mounted
How to assemble the standIf you need to remove or assemble the stand please read the following instructions.- Before attaching/detaching the stand, make sure to turn off the TV.- Before performing work, spread cushioning over the base area to lay the LED TV on. This will prevent it from being damaged.Assembling instruction:1) Fix the bracket ② and the stand④ with screws⑥ and cushions⑤.2) Put the television on the table, fix the stand and the unit ① with four screws③ given in the carton.BACK CABINETBRACKETMACHINE SCREWSGLASS STANDTRIANGLE CUSHIONSELF-TAPPING SCREWThree screws for 32”Only for 32” model(4 x M4*12)(3 x B-ST4*30)BACK CABINETBRACKETMACHINE SCREWSGLASS STANDCUSHIONSELF-TAPPING SCREWFour screws for 42”Only for 42” model(4 x M4*12)(4 x B-ST4*30)

8
External ConnectionStand and wall-mounted
Figure1Figure2ScrewScrewNote: The illustrations above are for explanation purposes and may vary slightly from actual product.Securing the TV Stand Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions at the start of this manual. For added stability, install the anti-fall device for safety purposes as follows. ALTERNATIVELY To secure the TV to the table: 1- Remove the screws from the center back of the stand, put the screws into the clamps, and then fasten the screws onto the stand again. 2- Assemble the stand to the TV.3 - Put the screws into the clamps and firmly fasten them on the table. Confirm that the screws have been firmly installed on the table.(B-ST4*30)(B-ST4*14)B-ST4*30 M4*12 B-ST4*14

External ConnectionStand and wall-mounted
9How to mount the LED TV on the wall Wall-mounting instruction:1. Please ensure the distance of wall-mounting holes is 200mm or 400mm on the back cabinet before you mounting your TV on the wall. 2. Mark the four mounting screw holes with pencil on the wall by using wall-mounting bracket(4) as ruler. Drill these four mounting screw holes on the wall.3. Drive Nylon sleeves(2) into the screw holes on the wall.4. Fasten wall-mounting bracket (3) on the Nylon sleeves(2) with self-tapping screws(4) on the wall.5. Fasten wall-mounting screws (5) into the two screw holes on the rear cabinet(6);6.Tighten wall-mounting bolt(7) on the bottom of the rear cabinet with screws(8).7. Left the TV and hang it on the wall by two people.Note: 1. Please mount your TV on the strength of the wall for withstanding the TV’s weight.2. Be careful not to scratch panel and TV cabinet when your fasten the screws on the TV.200mmOnly for 32” modelOnly for 42” model1. Wall 2. Nylon sleeve 3. Wall-mounting bracket 4. Self-tapping screw 5. Wall-mounting screw 6. Rear cabinet 7.Wall-mounting Bolt 8. Screw200mm

10
General DescriptionOverview of front and side panel
INPUTMENUPROGVOL
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.INPUT Standby buttonPress button to toggle between normal and standby mode.7POWER INDICATORRed:In standby mode.Green: In power on mode.PROGPress to change programs.In the on-screen menu, use the PROG buttons as up/down arrow buttons.INPUTMENUPROGVOL

11
General DescriptionOverview of back panel
You can connect the TV with video devices such as DVD/VCD player, VCR and video camera to enjoy the high quality picture. USBHeadphoneDVD playerBlue-ray disc playerPC (HDMI-output)PC Home theater system with digital inputAudio systemPC CamcorderVCRDVD player with component output

12
Overview of Remote ControlGeneral Description
1. INPUT: This button is used to switch among different sources: DTV, ATV, AV Component, PC, HDMI1, HDMI2, USB1, USB2. Select a source and press OK button to confirm.2. POWER: Press this button to switch to standby mode, and press it again to turn TV on.3. Digital buttons(0~9): To select channel with digital buttons.4. INFO: This button is used to start the "Current Service Banner" application that provides information about the current service. In USB source, the button is used to provide information about video.5. RECALL: Switch to the previous program.6. FREEZE: Press this button to freeze the image. Note: The function is not available for the TV.7. MENU: Press this button to display main menu or exit the menu. When you are in the submenu, you can press it to return the main menu. 8. SLEEP: TV will be switched off automatically at preset sleep time if you have set sleep timer. Use your remote control to set the sleep timer. Press SLEEP button on the remote control, then press this button again to set sleep time: off, 10, 20, 30, 60, 90, 120, 180, 240 min. Press MENU button to exit when you have set the sleep timer. After you have set sleep timer, press SLEEP button again, you will see the remaining time. Notes: The sleep timer you have set will be cancelled when the TV turns off or if a p ower failure occurs.9. CH.LIST: Press it to show channel list on screen. 10. FAV: Press it to display favorite list.11. Arrow buttons: Press these buttons to move cursor up/down/left/right for menu. 12. OK:In main menu and submenu it is a validation button.13. GUIDE: In DTV source, this button is used to start the EPG application.14. Exit: Exit the menu.15. DTV: Switch to DTV mode.16. HDMI: Switch to HDMI1 mode directly, press twice to switch to HDMI2.SOUNDAUDIO LANGVOLPROGMENU1234567890INFORECALLFREEZESLEEP
EXIT
HOLDSIZEREVEALCANCELPICTUREMUTEINPUTPOWERTEXTSUBTITLETIMESUBCODE
FAV
CH.LIST
GUIDE
DTVHDMIUSBINDEXREDGREENYELLOWBLUE OKASPECTMIX

13
Overview of Remote ControlGeneral Description
17. USB: Switch to USB mode directly or call the control menu in USB mode. Please see the details in “Digital Media Player” on Page37 to Page45.18. ASPECT: Press this button to switch the screen mode.19. VOL and VOL: Press these buttons to adjust TV volume.20. PROGand PROG: Press these buttons to change channel upward or downward. In the teletext, these buttons are used to display the next page and previous page.21. MUTE: Press this button to shut off sound of the TV, press again to restore TV sound.22. Button/Audio Lang: sourceIn ATV , the button is used to set NICAM sound system. In DTV , the button is used to set the audiosource language. In USB source, the button is used to make language soundtrack switch(video). 23. Red/Green/Yellow/Blue Command: These four buttons are used to request linked buttons with the current menu/page.24. Teletext buttons: Detail operation please refer to "Teletext “ in the next page.25. SOUND: This button is used to select the sound mode.26. PICTURE: This button is used to adjust user picture mode, press this button repeatedly and select one of four settings.27. MIX: Teletext buttons for mix function, please refer to page 14-15.
StandardMildBrightUser  Sports SOUNDAUDIO LANGVOLPROGMENU1234567890INFORECALLFREEZESLEEP
EXIT
HOLDSIZEREVEALCANCELPICTUREMUTEINPUTPOWERTEXTSUBTITLETIMESUBCODE
FAV
CH.LIST
GUIDE
DTVHDMIUSBINDEXREDGREENYELLOWBLUE OKASPECTMIXStandardMusicMovieSportsUser

14
TeletextGeneral Description
OKASPECTSOUNDAUDIO LANGVOLPROGMENU1234567890INFORECALLFREEZESLEEP
EXIT
HOLDSIZEREVEALCANCELPICTUREMUTEINPUTPOWERTEXTSUBTITLETIMESUBCODE
FAV
CH.LIST
GUIDE
DTVHDMIUSBINDEXREDGREENYELLOWBLUEMIX
13
Teletext is an information system broadcast by certain channels which be consulted like a newspaper. It also offers to subtitles for viewers with hearing problems or who are not familiar with the transmission language.You can press these buttons to operate the teletext: Text Press TEXT button to enter or exit teletext mode. Hold Press HOLD button to toggle Hold function on or off. When Hold is switched on, the page acquisition is stopped. When Hold is switched off, the page acquisition is started. Size Press SIZE button one time to display the upper half of the screen in double height, press the SIZE button two times to display the lower half of the screen in double height, press three times to display the full screen in normal size. Red/Green/Yellow/Blue Command These four buttons are used for quick access to different pages as numbered at the bottom of the screen. Index Press INDEX button, then index page displays. Reveal Pressing this button will reveal any hidden data (answers to quizzes for example).Press the REVEAL button again to return to normal screen.

15
TeletextGeneral Description
Cancel The CANCEL button will exit from any Teletext on the display. Press CANCEL button again to exit Teletext and return to live TV broadcast. Subtitle Turning the Teletext subtitles on or off. Subtitles is a separate mode with only a few buttons available. There will be no OSD visible other than the Teletext Subtitles. In USB source, the button is used to make subtitle switch for video. Subcode Subcode mode gives the possibility to select certain subcode pages of a Teletext page. Entry of digits within the range 0...9 for current subcode entry. If the digit completes the entry, a page request is started. Press buttons to change thePROG/ PROG subcode pages. Time This button is used to show the time of the Teletext. Digital buttons(0~9) You can press them to enter the number of the Page required. PROG/PROG You can press them to change page upward or downward. Mix Press MIX botton, the teletext page changes transparent, TV content and teletext page content will display at the same time. Press MIX button again to exit MIX mode. OKASPECTSOUNDAUDIO LANGVOLPROGMENU1234567890INFORECALLFREEZESLEEP
EXIT
HOLDSIZEREVEALCANCELPICTUREMUTEINPUTPOWERTEXTSUBTITLETIMESUBCODE
FAV
CH.LIST
GUIDE
DTVHDMIUSBINDEXREDGREENYELLOWBLUEMIX
1313

Installing Batteries in the Remote ControlGeneral DescriptionAntenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the antenna jack. For details Please refer to the following drawing.Use a 75ohm - 300ohm converter300ohm coaxial cableAntenna feederANT IN75ohm coaxial cableAntenna cable
Antennas with 300  flat twins LeadsAntennas with 75  Round LeadsExternal Connection
Installing BatteriesPoint the remote towards the remote control sensor of the TV and use it within 8 meters.Put the used batteries into the recyc-ling bin since they can negatively affect the environment.The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.161Open the battery compartment cover on the back side.2Insert two 1.5V AAA size batteries in correct polarity. Don´t mix old or used batteries with new ones.3Closed the cover.INPUTMENUPROGVOL

Connecting VCR
These instructions assume that you have already connected your TV to an antenna or a cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable system. Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape. Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. 1. Unplug the cable or antenna from the back of the TV.2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.4. Connect a Component Cable between the COMPONENT [Y, Pb, Pr] jacks on the DVD player and COMPONENT [Y, Pb, Pr] jack on the TV. 5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AUDIO L and AUDIO R jacks on the TV.Note: 1. Whenever you connect an external device to your TV, make sure that power on the unit is turned off. 2. When connecting an external device, match the color of the connection terminal to the cable.VCR Rear PanelTV Rear Panel
WhiteRed
Red
White
ANTANT OUTS-VIDEOAUDIO OUT
RedBlueGreen
VIDEO OUT
213Audio Cable (Not supplied)YPbPr cable(Not supplied) RF Cable (Not supplied)123
External Connection
17
RedBlueGreen

External ConnectionConnecting a Camcorder
The rear panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR.18Each Camcorder has a different back panel configuration. When connecting a Camcorder or DVD, match the color of the connection terminal tothe cable.1. Connect a Video Cable between the AV VIDEO jacks on the TV and the VIDEO OUT jack on the camcorder.2. Connect Audio Cables between the AUDIO L and AUDIO R jacks on the TV and the AUDIO OUT jacks on the camcorder.3. Connect a Video Cable between the component IN Y on the TV and the VIDEO OUT jack on the DVD.4. Connect Audio Cables between the component IN AUDIO L and R jacks on the TV and the AUDIO OUT jack on the DVD. Note: 1. Whenever you connect an external device to your TV, make sure that power on the unit is turned off. 2. When connecting an external device, match the color of the connection terminal to the cable.Video Cable (Not supplied)1Audio Cable (Not supplied)2CamcorderWhite
Yellow
Red
Red
White
Yellow