RecorderGear CG1000 User manual

HD CAMERA GLASSES
CG1000
INSTRUCTION MANUAL

WHAT’S IN THE BOX?
A. USB Cable
B. CG1000 Camera Glasses
C. USB Charging Adapter
D. Extra Nose Pads
E. Dark Tint Lens Set
F. Replaceable Baery
AB
C
D
F
E

CAMERA
TOP VIEW
REPLACEABLE BATTERY
LED INDICATOR
USB PORT
ON/OFF
RESET

BOTTOM VIEW
ON/OFF
RESET

NOSE PADS
NOSE PAD ATTACHMENT PRONGS
(may require adhesive when changed)
BEHIND VIEW

Removing Lenses
1) Apply pressure from behind the lenses
2) It will then come free from the frame
Inserng Lenses
1) Place the lens above the correct poron of the frame
2) Apply pressure on the front of the lens unl it pops into place
3) Make sure the lens is inside of the frame all the way around
CHANGING LENSES

INSTRUCTIONS
Turn On
1) Hold the on/o buon for about 3 seconds.
2) The LED indicator light will ash blue 5 mes this indicates
that the camera glasses are on and recording has begun
3) Light will remain o while recording
Pause Recording/Standby Mode
1) Press the on/o buon for 1 second to pause
2) Press the on/o buon again to resume recording
Stop Recording/Turn O
1) Hold the on/o buon for about 3 seconds
2) LED will ash red 4 mes indicang recording has ceased
and device is powering o

Charging
1) Plug the USB cable into your computer or USB charger
2) Plug the other end of the cable into the charging adapter
piece
3) Plug the replaceable baery into the USB charging adapter
end
4) While the unit is charging, an LED light on the charging
adapter will shine solid red. When charging is complete the light
will turn solid blue
Reset
If the camera glasses have stopped recording or are not
responsive, it may be necessary to reset the device.
1) Insert a paper clip or ne-pped object into the reset hole,
press unl you feel the reset buon click hold momentarily and
remove. Repeat if necessary

Viewing Recordings
1) Remove your replaceable baery (glasses arm)
2) Plug your glasses into your computer via USB cable
3) Access les on the glasses by selecng the drive in My
Computer (Windows) or Finder (Mac)
4) The video les are located in a folder named “DCIM”
5) The les can be transferred by either copy and pasng or by
dragging and dropping onto your computer desktop
6)To Play videos open the movie les with your default media
player. We also recommend downloading VLC player to view
your recordings