Remington RMLS-330 User manual

A
J
J
L
L
C
DE
F
GH
K
M
N
N
O
SAFETY MUST BE YOUR FIRST PRIORITY WITH THIS PRODUCT
Instruction and Safety Manual
Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
Every year serious injury and even death occurs from hunting related falls. To ensure your safety, please COMPLETELY read and follow this safety
manual and ALL warning labels BEFORE assembling, installing or utilizing this product.
DO NOT USE THIS PRODUCT BEFORE FULLY UNDERSTANDING ALL SAFETY WARNINGS AND INSTRUCTIONS. IF YOU HAVE QUESTIONS, ARE
UNSURE ABOUTANY INFORMATION OR NEED ADDITIONAL INFORMATION CONCERNING YOUR PRODUCT, CONTACT OUR CUSTOMER
SERVICE DEPARTMENTAT 1-866-972-6168 OR VISIT WWW.TREESTANDCUSTOMERSERVICE.COM. KEEPAND MAINTAIN THIS SAFETYAND
INSTRUCTION MANUAL IN ASAFE LOCATION FOR FUTURE REFERENCE.
Warning
©2012 (rev. 03/12)
MODEL: RMLS-330
• Always Wear a Safety Harness with this Product
• Practice Using at Ground Level
• Weight Limit: 300 lbs.
• Tree Size: 9”-18” diameter
17’ LADDER TREESTAND

Customer Service Department 1-866-972-6168
TREESTAND SAFETY WARNINGS
Please read the following instruction manual and warnings labels completely before utilizing this product. Failure to understand and execute the instructions
and warnings may result in serious injury or death. In the event of an accident, have a plan for rescue, including the use of devices that may be easily reached
while suspended.
ALWAYS read and understand all warnings and instructions and use all safety products provided before each use of this product. Failure to read and
understand all warnings and instructions may result in serious injury or death. Contact a Customer Service Representative with any questions you may have.
NEVER exceed total weight limit of 300 lbs. DO NOT use if your combined weight with all of your hunting gear and any accessories exceeds 300 lbs. Use of
tree stand over the weight limit may result in serious injury or death.
DO NOT use this tree stand while under the influence of alcohol, medication or any illegal substances. Use of tree stand while under the influence of any of
these substances may result in serious injury or death.
NEVER use this treestand during inclement weather. DO NOT use tree stand during thunderstorms, snowstorms, hurricanes, tornadoes or any other weather
conditions that include (but not limited to) lightning, icy conditions, or high winds that could create slippery or dangerous situations. End your hunt and return to
the ground if inclement weather conditions arise.
NEVER use treestand If you are feeling ill, nauseous, dizzy or if you have a prior condition that could cause a problem. i.e., heart condition, joints that lock-up
spinal fusions, etc., or if you are not well rested and alert. Physical ailments can reduce your ability to safely install, utilize, and remove your treestand. Please
consult a physician prior to use.
NEVER use this tree stand if you have a history of health problems such as (but not limited to) heart problems, back problems, high blood pressure, impaired
vision, equilibrium impairments, are afraid of heights, have been advised by a doctor or physician not to climb. If you are not physically fit, well rested, and
alert, or if you have any other physical or mental condition that would impair your ability to properly use this treestand.
NEVER use this tree stand on a tree that is dead, leaning, diseased, loose barked or on a utility pole as the tree may fall, break, or uproot and may result in
serious injury or death. NEVER rely on a branch for support.
NEVER jump or bounce on the treestand’s platform or ladder sections to seat it to the tree. Instead, step firmly on the first rung of the bottom ladder section to
set the ladder into the ground before proceeding to climb the ladder.
NEVER transport any of your equipment with yourself while ascending or descending the tree. You will need to have two hands free during ascending and
descending for safety. Use a haul line to pull up your firearm (unloaded, chamber opened with safety lock engaged, barrel facing towards the ground), bows,
arrows, knives or any other equipment to your tree stand once you have reached your desired hunting height. ONLY pull up hunting equipment after the tree
stand has been secured to the tree and after you and your harness have been secured to the tree. Prior to descending, lower your equipment on the opposite
side of the tree from which you are climbing. Make sure that the unloaded firearm’s safety lock is engaged and the gun barrel is pointing towards the ground.
ALWAYS hunt with a plan and a buddy. Before you leave home, let others know your exact location, when you plan to return and who is with you.
ALWAYS carry emergency signal devices such as a cell phone, walkie-talkie, whistle, signal flare, PLD (personal location device) and flashlight with you at all
times and within reach even while you are suspended in your harness. Watch for changing weather conditions. In the event of an accident, remain calm and
seek help immediately.
ALWAYS inspect the tree stand and the Fall Arrest System (FAS) (Harness) for signs of wear or damage BEFORE each use. Also inspect to ensure that nuts
and bolts are secure. Pay special attention to the harness and straps, guaranteeing that nothing has been frayed or severed. Destroy all products that cannot
be repaired by the manufacturer. Contact a Customer Service Representative for replacement parts. The FallArrest System MUST be discarded and replaced
after a fall has occurred.
DO NOT ATTACH YOUR FULL BODY HARNESS TO YOUR TREESTAND.
NEVER modify your treestand in any way by making repairs, replacing parts, or altering adding or attaching anything to it except if explicitly authorized in
writing by the manufacturer. Improper installation or adjustment may cause serious injury or death. Remove all contents from box. Inspect for any damaged or
missing parts. If any parts are missing or damaged, you must only use certified replacement parts. Using any other replacement parts will
void product warranty. THERE ARE NO EXTRA PARTS. All parts MUST be used to ensure the safety of you and your stand. If you think parts are missing or
damaged, STOP IMMEDIATELY and contact our Customer Service Department. Using the tree stand with missing or damaged parts may result in serious
injury or death. DO NOT return this product to the retailer. Contact a Customer Service Representative if you have any missing, damaged or extra parts.
PRACTICE installing, adjusting and using your treestand at ground level prior to using it at an elevated position.
ALWAYS keep instructions (written and video) in a safe place and review before each use. It is the responsibility of the treestand owner to furnish the complete
instructions to anyone who borrows or purchases the treestand from you. A safe treestand hunting video has been included. Please view it in it’s entirety prior
to using this product.
NEVER use this treestand for any use other than hunting. Our treestands are designed for hunter’s to wear a Full Body Harness. If you are not completely
comfortable and confident with your ability to safely install, ascend, hunt and descend using a Full Body Safety Harness and this treestand, DO NOT
PROCEED.
NEVER use this treestand for trimming trees.
NEVER fall asleep in your stand as you may fall out resulting in serious injury or death.
ALWAYS be sure to retighten all bolts BEFORE each new use of treestand.
ALWAYS have a minimum of three people present when installing or removing this treestand.
©2012 (rev. 12/11)
www.treestandcustomerservice.com

Customer Service Department 1-866-972-6168
TREESTAND SAFETY WARNINGS
NEVER remove any safety warning
stickers from this product.
Safety must be your first priority
during the use of this product.
NEVER adjust your stand while in use. Practice the attachment of this treestand at ground level before using in a hunting environment. ALWAYS ensure that
you and your treestand are safely secured to a healthy tree. Your tree stand MUST be attached tightly to the tree and secured in place. If the stand is not secure,
it may shift while in use, resulting in serious injury or death.
The Installation Cross Straps and Stabilizer Bar(s) MUST be properly installed before each use of the treestand.
ALWAYS inspect every ladder section connection every time you use the stand before you leave the ground. If ladder sections are separating, with the help of at
least two other people, lower the stand to the ground, make adjustments, and reinstall.
ALWAYS check the ground below the tree stand to make sure it is firm and level. Sloping ground or uneven terrain (one side of a rock or root) can cause your
tree stand to tilt or shift.
ALWAYS maintain three points of contact when climbing the tree stand. (Two feet and one hand or one foot and two hands.)
ALWAYS lean forward as you climb and attach your harness to the tree before securing the platform to the tree and stepping onto the platform.
DO NOT leave your treestand outside since weather or animals may cause damage. Tree growth can also cause stress and damage straps and buckles. It must
be stored inside when not in use.
NEVER wear jewelry or loose fitting clothing, which can cause hazardous conditions. Clothing may be caught in your equipment and cause you to fall. You must
always wear non-slip or rubber boots. Shoelaces must be tucked into your boots. Rings and necklaces MUST NOT be worn.
NEVER use this treestand with a second person. The treestand is designed for use by ONE person.
NEVER let children play with or use this treestand without adult supervision. This treestand is not a toy. No one under the age of 18 should attempt to use this
product without direct adult supervision.
DO NOT use tree stand if any nuts or bolts or parts are loose, bent, or crooked.
ALWAYS know your physical limitations. Don’t take chances. If you start thinking about how high you are, don’t go any higher. Instead, choose a minimum
height that will allow for safe, effective and comfortable hunting.
ALWAYS lean forward towards the tree as you climb and attach your harness to the tree BEFORE securing the platform to the tree and stepping onto the
platform. NEVER lean out from the treestand for any reason.
ALWAYS wear a Fall Arrest System (FAS) (Harness) consisting of a full body safety harness after leaving the ground. A TMACertified Full Body Harness MUST
always be connected to yourself and the tree during ascending, hunting and descending. Single safety belts and chest harnesses are no longer allowed and
should NEVER be used. If you are not wearing a Full Body Harness properly attached to the tree, that is protecting you from a fall, DO NOT leave the ground.
Failure to wear your Full Body Harness may result in serious injury or death.
Be aware that falls can occur at anytime after leaving the ground.
ALWAYS read and understand the manufacturer’s Warnings, expiration date (if applicable) and instructions on how to use and how to properly adjust the
harness. Practice the use of a full body safety harness at ground level in the presence of a responsible adult to experience the feeling of hanging suspended
before using in a hunting environment. Failure to follow harness instructions may result in not being able to return to the stand and being suspended in a
harness after a fall, or serious injury or possibly death. If the hunting location is unknown by anyone and communication efforts are unsuccessful, you MUST
have a personal plan for rescue/escape because prolonged suspension in a harness may be fatal. It is important to exercise the legs by pushing against the tree
or doing other forms of continuous leg exercises to avoid blood pooling while being suspended. Hunters with varying degrees of physical fitness may require
different plans to recover/escape the effects of prolonged suspension. Have a personal plan and practice it in the presence of a responsible adult before leaving
the ground. No one escape/rescue plan will work for every hunter on every tree in every circumstance. Only you can determine the best recovery/escape plan
for your situation before leaving the ground.
ALWAYS have a suspension relief device on your person and readily accessible while using a harness. These devices allow the user to relieve the load on the
lower extremities if suspended in a harness and help maintain circulation in the legs, mitigate suspension trauma (blood pooling) or allow descent to the ground.
Several optional products/systems are available that offer self-recovery or self-extraction from a fall when suspended in a harness. Some systems automatically
descend the user while others allow user control. One of these products/systems can be considered for use as an additional safety precaution against prolonged
suspension and suspension trauma, Be sure to follow the manufacturers’ instructions on the safe use of these products/systems.
Hunt from the ground when self-recovery escape is absent. There is time to make a correct decision on what action to take if a fall occurs while wearing a full
body harness. It is important to remember “DO NOT PANIC.” Remain calm and implement your practiced rescue, relief and recovery plan.
NEVER allow the tether strap to get under your chin or around our neck. The length of the harness tether MUST be minimized at all times. It should be adjusted
so that it is above the head with no slack (snug) in the sitting position and you should have the minimum amount of slack possible when climbing.
W A R N I N G
DO NOT use this ladderstand under the influence of alcohol,
drugs, or medication. Using ladderstand under the influence
of alcohol, drugs, or medication may result in serious injury or
death.
NEVER use ladderstand if you have dizzy spells, a heart
problem, are afraid of heights, have been advised by a doctor
or other health care provider not to climb, or have any
condition that would impair your ability to climb up or down or
use treestand as it could result in serious injury or death.
NEVER remove or deface ladderstand warning labels.
Replacement labels can be obtained from the address below.
NEVER make any alterations or modifications to the ladder
stand.Doing so may result in serious injury or death and will
void all warranties.
NEVER stand on treestand seat or armrests. Standing on any
of these parts may cause the treestand to break or fail resulting
in serious injury or death.
NEVER use treestand in a tree that is dead, diseased, leaning,
or on wet or uneven ground as the tree may fall, break, or
uproot and may result in serious injury or death.
NEVER use ladderstand during inclement weather. DO NOT
use treestand during thunderstorms or any other weather
conditions including (but not limited to) lightning, freezing rain,
high wind that could create slippery or dangerous conditions.
DO NOT use this ladderstand without reading and following all
warnings and instructions before each use. Failure to do so
may result in serious injury or death.
DO NOT exceed the ladderstand's 300 lbs. weight limit, which
includes your body weight as well as the weight of your clothes
and gear. Exceeding the ladderstand's weight limit may cause
the treestand to break or fail resulting in serious injury or death.
ALWAYS wear a Full Body Harness while using this ladder
stand. Failure to wear a full body harness while using
this ladderstand may result in serious injury or death.
ALWAYS inspect your ladderstand before each use. DO NOT
use if parts are missing, worn, or damaged.
SAMPLE
©2012 (rev. 12/11)
www.treestandcustomerservice.com

Customer Service Department 1-866-972-6168
• ALWAYS thoroughly inspect the tree before installing your product. DO NOT install your TREE/LADDER STAND onto any dead or unsafe tree, telephone or utility
pole, structural column, or man-made structure. Doing so may result in serious injury or death.
• ALWAYS select the proper tree for use with your TREE/LADDER STAND. Select a live straight tree that fits within size limits recommended (minimum tree
diameter must be no less than 9 inches and maximum of 18 inches.). DO NOT rely on a branch for support.
• DO NOT select a tree in the dark or choose a tree in close proximity to a fence. You must not have any stumps or rocks beneath your tree.
• NEVER use TREE/LADDER STAND on a tree that is dead, diseased , leaning or on wet and uneven ground as the tree may fall, break or uproot.
• Your tree must not be wet, icy or slippery or on wet, swampy, or loose ground that allows the tree to be unstable. Check the ground under TREE/LADDER STAND
to ensure it is firm and level.
• Be sure you have a level stand platform. Your tree must not lean or have any irregular shape.
• Tree must not have any loose or scaly bark or excessive vines, nails, screws, or any other sharp objects protruding that may sever webbing on product. Any
surrounding trees must not lean or have dead limbs that may fall onto you or your product.
• NEVER HURRY!! HURRYING CAUSES ACCIDENTS!! While climbing a TREE/LADDER STAND, make slow, even movements no more that ten to twelve inches
at a time. Make sure you have proper contact with tree and/or TREE/LADDER STAND every time you move. On ladder tree stand, ALWAYS maintain three points
of contact with each step and ALWAYS lean forward as you climb.
Several treestands are equipped with a footrest, armrests and/or shooting rail. Neither the footrest, armrests nor the shooting rail have been designed to
support a user’s weight. Under NO circumstances should you place more than fifteen (15) pounds of weight on these structures. Doing so will put the user
in serious risk of injury or death.
CHOOSING A SAFE TREE
PROPER CARE AND MAINTENANCE:
• Inspect for defects (damage, rot, corrosion, cracks, freezing, excessive heat, etc.) before every use is required. Do not use if damage is detected or
suspected.
• We recommend replacing all hardware/cables/nuts/bolts/clips on your tree stand every two (2) years or sooner if inspection finds it necessary. Use only
Primal Vantage approved replacement straps and parts. Use of any other straps or parts, will be viewed as a modification to the product. Any modification
will void the warranties and relieve Primal Vantage from all liabilities. Failure to follow these instructions may result in serious injury or death.
• By registering your product, you may be enrolled in our discount program.
You may receive a 20% off coupon for our website store, www.primal-store.com to purchase replacement parts in the future.
• DO NOT overtighten the hardware. DO NOT use a socket wrench. This can lead to structural damage and may negatively affect the performance of your
stand. Failure to follow these instructions may result in serious injury or death.
©2012 (rev. 12/11)
www.treestandcustomerservice.com

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
37”x3/4”x3/4”
Step (1)
K201/4”x3/4”x3/4”
Stabilizer Bar (1)
P231/2”x11/4”x1”
36”x5”x3/4”
HFootrest (1)
23 1/4”x3 1/2”x8 1/4”
CSeat Assembly (1)
30”x27”x15”
Yoke (2)
J20 1/4”x6 1/2”x1”
Shooting Rail Cover (1)
O
M10 Quickclip (4)
QRRatchet Strap (1)
Installation
Cross Strap (2)
T
NShooting Rail
Extender (1) 251/4”x27/8”x3/4”
Shooting Rail (1)
M28”x6”x45/8”
DLeft
Platform (1)
26”x121/2”x3/4”
ERight
Platform (1)
26”x121/2”x3/4”
Seat Support (2)
G37”x3/4”x3/4”
Handle Rail (2)
F56”x1”x13/16”
WWW.TREESTANDCUSTOMERSERVICE.COM
UAdjustment
Knob (1)
©2012 (rev. 03/12)
LPlatform Brace (2)
P
Q
R
S
T
U
A
B
C
D
E
F
G
H
J
K
L
M
N
O
PARTS LIST
1 Shooting Rail Cover Part # PPSC-330
1 Stabilizer Bar Part # DSB-500
1 Tiedown Rope Part # TR-1000
1 Ratchet Strap Part # RA-100
1 Adjustment Knob Part # AK-100
1 Shooting Rail
1 Seat Assembly Part # PSP-330
Part # PSR-330
1 Top Ladder
2 Middle/Bottom Ladder Part # PTL-330
Part # PL-330
1 Left Foot Platform Part # PLP-330
1 Right Foot Platform Part # PRP-330
2 Handle Rail Part # PHR-330
2 Seat Support Part # PSS-330
1 Step Part # PS-330
2 Platform Brace Part # PPB-330
1 Footrest Part # PFR-330
2 Yoke Part # PYK-330
2 Shooting Rail Extender Part # PSX-330
Part # 1615
4 M10 Quickclip
2 Installation Cross Strap Part # ICS-1000
MODEL: RMLS-330
• Always Wear a Safety Harness with this Product
• Practice Using at Ground Level
• Weight Limit: 300 lbs.
• Tree Size: 9”-18” diameter
17’ LADDER TREESTAND
ATop Ladder
Section (1)
41” x 14” x 1”
B
Middle/Bottom
Ladder Section (2)
59”x14”x1”
Hardware
Part # 1245W
Part # 2012
1 M12x45mm Bolt
w/wingnut
1 Harness
45w
8 M12x60mm Bolt Part # 1255 Part # 1260
5 M12x55mm Bolt
60
55
Part # 1063
2 M10x60mm Bolt
w/3 washers
60
2 M12x80mm Bolt
w/3 washers Part # 1283
80
Part # 1025
2 M10x25mm Bolt
25
Part # 1240
4 M12x40mm Bolt
40
2 M12x50mm Bolt
w/4 washers Part # 1254
50
Tiedown
Rope (1)
S

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
WWW.TREESTANDCUSTOMERSERVICE.COM
©2012 (rev. 03/12)
MODEL: RMLS-330
• Always Wear a Safety Harness with this Product
• Practice Using at Ground Level
• Weight Limit: 300 lbs.
• Tree Size: 9”-18” diameter
17’ LADDER TREESTAND
M12x80mm w/3 washers (2)
M10x60mm w/3 washers (2)
M12x50mm w/4 washers (2)
M12x55mm w/2 washers (5)
M12x60mm w/2 washers (8)
M12x40mm w/2 washers (4)
M10x25mm (2)
M12x60
M12x55
M12x80
M12x40
M12x50
M10x60
M10x25
HARDWARE BLISTER PACK
HARDWARE
Part # 1245W
1 M12x45mm Bolt
w/wingnut
45w
8 M12x60mm Bolt Part # 1255 Part # 1260
5 M12x55mm Bolt
60
55
Part # 1063
2 M10x60mm Bolt
w/3 washers
60
2 M12x80mm Bolt
w/3 washers Part # 1283
80
Part # 1025
2 M10x25mm Bolt
25
Part # 1240
4 M12x40mm Bolt
40
2 M12x50mm Bolt
w/4 washers Part # 1254
50
M12x45mm w/wingnut (1)
Above Bolts Shown Actual Size

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
ASSEMBLY INSTRUCTIONS PAGE 1 MODEL: RMLS-330
17’ LADDER TREESTAND
1. Attach Left Platform D to Right Platform E
together using 3-M12x55mm bolts. Set aside
for future steps.
©2012 (rev. 03/12)
3. Attach each Seat Support G to Seat Assembly C
using 2-M12x60mm Bolts at the top of the Seat
Assembly and 2-M12x50mm Bolts w/4 washers at the
seat frame. Place a washer between each of the welded
tabs.
DE
55
1.
2. Attach Shooting Rail Extenders N to
Shooting Rail M using 2-M10x25mm Bolts.
Set aside for future use.
M
25
N
2.
4. Attach Seat Supports G to the rear of assembled
Foot Platform using 2-M12x60mm Bolts.
4
G
60
3.
G
C
50
60
60

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
ASSEMBLY INSTRUCTIONS PAGE 2 MODEL: RMLS-330
©2012 (rev. 03/12)
6.
5. Attach Handle Rails F to Seat Assembly C Foot Platform and Footrest H .
Follow the steps below.
The Handle Rails are interchangeable. The welded brace can be on either side.
6. Attach Handle Rails F to Seat Assembly C using
2-M12x40mm Bolts on each side.
F
40 40
C
REAR VIEW
5.
17’ LADDER TREESTAND
7. Insert 1-M12x80mm Bolt with 3 washers through
Footrest H then through Platform, then through Handle
Rail F .
A washer should be placed on each side of the Footrest
and against the nut.
See below closeup photos.
80
FRONT VIEW
80
H
F
F
7.
Washer
Washer
Washer
Nut
H
F
D
Bolt
Head
LEFT SIDE
Washer
Washer
Washer
Nut
F
E
Bolt
Head
RIGHT SIDE
H

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
ASSEMBLY INSTRUCTIONS PAGE 3 MODEL: RMLS-330
©2012 (rev. 03/12)
8. Attach assembled Shooting Rail to Handle Rails F
using 1- M10x60mm Bolt on each side.
See adjacent closeup photo.
C
N
F
Washer
Nut
Bolt
Head
O
9.
9. Attach Shooting Rail Cover O to Shooting Rail M .
17’ LADDER TREESTAND
10. Insert Yoke J into each Handle Rail F .
Attach Step K to Yokes J using 2-M12x60mm Bolts.
J
K
F
60
10.
F
60
M
8.

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
ASSEMBLY INSTRUCTIONS PAGE 4 MODEL: RMLS-330
17’ LADDER TREESTAND
©2012 (rev. 03/12)
11. Insert Top Ladder Section A into Yokes J .
Attach one end of Platform Brace L to the bottom of Platform
D and E using 2-M12x55mm Bolts.
Attach the other end of Platform Brace L to the sides of Top
Ladder Section A using 2-M12x60mm Bolts.
60
L
55
11.
15. Follow Steps 12-14 to attach the bottom section to the middle section.
12. Insert Ladder Section B into the
sleeved end of Top Ladder Section A .
12.
A
B
13.
14. Close the quickclip to secure
the ladder sections together.
13. Insert 1 - Quickclip through
the hole on the sleeve, and
through the ladder sections on
each side of the ladder.
LADDER ASSEMBLY
14.

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
All Season Deluxe
3.
3. One person will stand at the base of ladder with
his/her foot on bottom rung while holding installation
straps. This will prevent tree stand from sliding. Two
people will stand at opposite ends of tree stand,
facing Platform and slowly walk tree stand upward
using rungs of ladder.
4.
4. As tree stand is being raised, the person
holding Installation Straps will pull toward
themself to take up slack. It will steady and
ease the weight of stand on the other two
people. Continue walking stand upward,
until Tree Contact is resting against the tree.
2. Position bottom of stand 4-5 feet from
base of tree.
2.
NOTE: Drawings are for illustration purposes only and may not depict actual product.
WARNING
Stabilizer Bar and Installation Straps
MUST be secured prior to climbing the
Ladderstand. Failure to comply may result
in serious injury or death.
WARNING
DO NOT climb ladder without stabilizer bar
installed. Serious injury or death may occur if
stabilizer bar is not installed.
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
INSTALLATION INSTRUCTIONS PAGE 1 MODEL: RMLS-330
17’ LADDER TREESTAND
©2012 (rev. 03/12)
1. Attach Ratchet Strap R to the outermost corners of each Tree Connection Brace.
(See Ratchet Instructions).
Attach Installation Cross Straps T just behind the Ratchet Straps.
(See Installation Strap Instructions).
R
T
1.

7. Tie one end of Tiedown Rope J to the
inner part of Stabilizer Bar near the flanged
end. Wrap the rope around the back of the
tree once. Then tie the other end of the rope
to the stabilizer bar.
7.
J
Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
10. Cautiously climb to the top of the
treestand. Wrap the strap of the
ratchet around the back of the tree and
thread it through the ratchet.
(See Ratchet Instructions).
9.
9. After the ladder stand has been secured to the
tree with the installation straps, and the stabilizer
bar has been securely attached to the tree, continue
to have two people hold the ladder, climb cautiously
up to the platform. Once you reach the top,
IMMEDIATELY ATTACH YOUR SAFETY
HARNESS TO THE TREE. Keep the tether strap
above your head.
8. Cross Installation Strap behind tree.
Attach to the top rung of the bottom
ladder section.
(See Installation Strap Instructions).
8.
WARNING
DO NOT sit on seat platform until
the ratchet has been secured.
10. R
NOTE: Drawings are for illustration purposes only and may not depict actual product.
WARNING
Stabilizer Bar and Installation Straps
MUST be secured prior to climbing the
Ladderstand. Failure to comply may result
in serious injury or death.
WARNING
DO NOT climb ladder without stabilizer bar
installed. Serious injury or death may occur if
stabilizer bar is not installed.
5. Slide the inner part of the Stabilizer Bar
into the outer part. Attach Stabilizer Bar P to
the second rung of the Middle Ladder Section
with 1 - M12x45w bolt and 1 wingnut.
Insert the Adjustment Knob U in the
Stabilizer bar at the proper adjustment point
to the tree.
45w
P
U
5.
6. Move base of ladder toward or away from tree
slightly in order to make Platform as parallel to
the ground as possible.
Apply your full weight to the first step so it
settles into the ground.
6.
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
INSTALLATION INSTRUCTIONS PAGE 2 MODEL: RMLS-330
17’ LADDER TREESTAND
©2012 (rev. 03/12)

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
INSTALLATION STRAP INSTRUCTIONS
1. Place looped end of strap under platform. 3. Pull to tighten. Continue with these steps to
install the other strap on the other side of the
platform.
2. Insert loose end of strap through the loop.
4. Place loose end of strap with clip, under
the top rung of the bottom ladder section.
Slot 2 Slot 1
5. Insert the strap through Slot 1 on the clip.
6. Insert the strap through the
Slot 2 with the teeth. 7. Pull strap to tighten.
8. Slide the buckles out to the sides to
create tension on the straps.
DO NOT sit on seat platform until the ratchet and installation straps have been secured.
WARNING

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
RATCHET STRAP INSTRUCTIONS
You MUST follow these instructions prior to installation
Insert ratchet through loop Pull to tighten
Place looped end of
Ratchet under platform
Insert strap through loop
Place looped end of
strap under platform Pull to tighten
5
After strap is tight,
close handle to the
locked position
DETAILED RATCHET STRAP INSTRUCTIONS
Open ratchet handle
flat and insert end of
strap through opening.
2
Pull Strap through
opening
3
Insert end of strap
through slot in ratchet
wheel.
4
Ratchet handle back
and forth to tighten strap
6
To release tension, push spring
loaded retaining lock and
simultaneously pull on strap.
1