Robert audio Solutions FrontRow Juno User manual

User guide - Juno
Inputs and Outputs - The main unit
1 = 3.5mm Jack stereo input for external audio, to
connect to other classroom devices such as a DVD
player etc
2 = Sound output with volume control to allow you to
connect a hearing impairment device
3 = Phono Stereo inputs for external audio, to connect
to other classroom devices such as a DVD player
etc
4 = Two serial ports for charging microphones
5 = Socket for power supply
6 = Power Switch
Supplied and Serviced by Roberts audio Solutions LTD
Prioryfield House, 20 Canon street, Taunton, Somerset, TA1 1SW |
www.robertsaudiosolutions.co.uk |[e-mail] |
Tel: [phone] | 01823323363
1
2
3
4
Tower Controls Master Volume
Your Juno system has a master volume control that increases or
decreases the mixed volume of all devices and microphones.
From the home screen you can adjust or mute the master
volume of your Juno Tower.
You can control the individual volume of each device connected to
your Juno Tower. Devices that are currently playing audio will
appear in white text and have a green check mark in the far right
on the blue bar.
To Adjust the microphone volume. To control the volume of
each microphone press the volume icon and select the mic which
you want to change adjust (Display 1). The mic that is active
and un-muted will appear in white text and will have a green
checkmark in the far right of the blue bar. Adjust the volume of
the connected device using the up or down arrow (Display 2).
Previous version model
Latest version model
Master volume control
Settings
Device volume control
Microphone volume control
Display 1 Display 2
Page 1
6 5

User guide - Juno
Supplied and Serviced by Roberts audio Solutions LTD
1. Select the audio device for which you want to change the volume (Display 1).
Adjust the volume of the connected device using the up or down arrow (Display 2).
Teacher’s Microphone Student’s Microphone
Microphone element
Mute Indicator light
OFF/STANDBY = Un-muted
SOLID RED = Muted
Power Indicator
SOLID GREEN = Power On
NO LIGHT = OFF / Standby
One-Touch Button
PRESS MOMENTARILY =
Awaken
PRESS MOMENTARILY =
Mute / Un-mute
PRESS AND HOLD = Issue
Voice Command
Battery Indicator
FLASHING RED = Battery Low
6. Charging Jack for
charging via USB
cable
7. 3.5mm audio input
jack. This allows you use
the Pendant Mic to
transmit audio from any
secondary audio source
such as a computer or
MP3 player.
Microphone element
3 Power Indicator
SOLID GREEN = On
OFF = Power Off
Power/Push-to-talk Switch
PRESS AND HOLD = Push-to-talk
PRESS AND SLIDE UP = Power On
Battery Indicator, O
FF = Battery Charged
FLASHING RED = Battery Low
Charging / Programming Jack For
charging via USB cable
Audio Socket
3.5mm audio input jack allowing you to
transmit audio from any secondary audio
source such as a computer or MP3 player.
2
3
4
1.
2.
3.
4.
5.
6.
5 6
1.
2.
3.
4.
5.
5
Prioryfield House, 20 Canon Street, Taunton, Somerset, TA1 1SW |
www.robertsaudiosolutions.co.uk |[e-mail] |
Tel: [phone] | 01823323363
Display 1 Display 2
Page 2