Rolbak NGD2118 User manual

NGD2118
ASSEMBLY INSTRUCTIONS

Thank you for your purchase of this Rolbak product.
We work around the clock and around the globe to ensure that Rolbak
products maintain the highest possible quality. However, in the rare
instance that your product is defective or missing parts, contact your
retailer to submit parts requests or warranty claims. Please read the
warranty information at the back of these assembly instructions for
further details.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS IN ENTIRETY
BEFORE ASSEMBLING YOUR PRODUCT.
THANK YOU!

WARNINGS!

TABLE OF CONTENTS
5
6
9
12
14
15
16
17

PARTS IDENTIFIER (NOT TO SCALE)
5

ASSEMBLY INSTRUCTIONS
PART 1 - ATTACHING THE ROLBAK NET | METHOD A - EXTENSION ARM ATTACHMENT
6
1. Assemble three pieces of Square Black Tubes to form Lower Support Tube. Attach Tubes using two
Hex Head Screws and the Small Hex Wrench supplied.
[Note: All three Square Black Tubes may not be necessary for Upper Support Tube if working with a narrow
extension arm.]

ASSEMBLY INSTRUCTIONS (CONT.)
7
10. Join the three Round Silver Tubes together-swaged ends t into one another and lock forming one
Assembled Tube.
11. Slide Assembled Tube through the opening at the top of the Rolbak Net Header.Assembled Tube.
PART 1 - ATTACHING THE ROLBAK NET | METHOD A - EXTENSION ARM ATTACHMENT

ASSEMBLY INSTRUCTIONS (CONT.)
8
13. Insert square end of Pipe Insert Bracket into one open end of Lower Support Tube. Place circular
end of Bracket into Assembled Tube/Rolbak Net Header below. Lock into place with Locking Pin.
(PG. 14)
(PG. 15)
PART 1 - ATTACHING THE ROLBAK NET | METHOD A - EXTENSION ARM ATTACHMENT

ASSEMBLY INSTRUCTIONS (CONT.)
9
1. Assemble three pieces of Square Black Tubes to form Lower Support Tube. Attach Tubes using two
Hex Head Screws and the Small Hex Wrench supplied.
PART 1 - ATTACHING THE ROLBAK NET | METHOD B - RIM MOUNTING BRACKETS

ASSEMBLY INSTRUCTIONS (CONT.)
10
7. Join the three Round Silver Tubes together-swaged ends t into one another and lock forming one
Assembled Tube.
8. Slide Assembled Tube through the opening at the top of the Rolbak Net Header.
PART 1 - ATTACHING THE ROLBAK NET | METHOD B - RIM MOUNTING BRACKETS

ASSEMBLY INSTRUCTIONS (CONT.)
11
10. Insert square end of Pipe Insert Bracket into one open end of Lower Support Tube. Place circular
end of Bracket into Assembled Tube/Rolbak Net Header below. Lock into place with Locking Pin.
(PG. 14)
(PG. 15)
PART 1 - ATTACHING THE ROLBAK NET | METHOD B - RIM MOUNTING BRACKETS

ASSEMBLY INSTRUCTIONS (CONT.)
12
1. Assemble three pieces of Square Black Tubes to form Lower Support Tube. Attach Tubes using two
Hex Head Screws and the Small Hex Wrench supplied.
Call 800-759-0977 for part
PART 1 - ATTACHING THE ROLBAK NET | METHOD C - SADDLE BRACKET

ASSEMBLY INSTRUCTIONS (CONT.)
13
4. Join the three Round Silver Tubes together-swaged ends t into one another and lock forming one
Assembled Tube.
7. Insert square end of Pipe Insert Bracket into one open end of Lower Support Tube. Place circular
end of Bracket into Assembled Tube/Rolbak Net Header below. Lock into place with Locking Pin.
5. Slide Assembled Tube through the opening at the top of the Rolbak Net Header.
(PG. 14)
(PG. 15)
PART 1 - ATTACHING THE ROLBAK NET | METHOD C - SADDLE BRACKET

ASSEMBLY INSTRUCTIONS (CONT.)
14
(PG. 16)
PART 2 - SECURING THE NET BASE | METHOD A - SAND BAG

ASSEMBLY INSTRUCTIONS (CONT.)
15
(PG. 16)
PART 2 - SECURING THE NET BASE | METHOD B - WATER BAG

SUGGESTED USAGE
16
For longer system life, disassemble and store your Rolbak
Return Net during winter months.