RoyalTek RMP-8200 User manual

Cinema on–the–GO !
RMP-8200
User’s Manual

2
Table of Contents
Introduction........................................................................................ 3
What is inside the box:.......................................................................3
Overview.............................................................................................................3
System Requirement:.......................................................................................4
Getting Started.................................................................................4
Insert the battery...............................................................................................4
Power adaptor ...................................................................................................5
Connections....................................................................................... 7
Connecting to a Notebook or Perosonal Computer ..................................7
Via Micro SD card/T Flash card......................................................................9
Connecting to a Composite Video Device....................................................9
Remote control................................................................................................10
Intended Use....................................................................................................10
Powering Off....................................................................................................12
Adjusting Image Size......................................................................................11
Control the Brightness...................................................................................12
Control Volume................................................................................................13
Using ....................................................................................................15
Main Menu........................................................................................................15
Video and Audio File Support ...........................................................16
Photo View .................................................................................................18
Settings .......................................................................................................19
A/V in ...........................................................................................................22
Office Viewer ..............................................................................................23
Product Specification...................................................................28
Trouble Shooting.............................................................................29
Support................................................................................................30

3
Introduction
Thanks for purchasing RoyalTek’s product.
What is inside the box:
lRMP-8200 CINEMA ON-THE-GO
lAC/DC Power adaptor(EU/UK/US plugs)
lRechargeable battery
lUSB cable
lA/V cable
lTripod
lRemote control
lCarry Pouch
Overview
System Requirement:
lWindows 7, Vista (32bits & 64bits), XP (32bits & 64bits)
lUSB port (1.1 or above, 2.0 recommended)

4
Getting Started
Insert the battery
1. Slide the battery cover.
2. Insert the battery.
3. Replace the battery cover and slide it up gently until hearing a click.

5
Slide the lens cover to the other side
Switch on the power button. From “O” side to “I”.
Before you use, we suggest you to fully charge the battery.
It will take around 2.5 hoursfor battery charging.
Power adaptor
1. Select the correct plug for your environment.

6
2. Connect the plug to the power adapter.
To disconnect, please push the button and push out the plug.
Notes:
If The RMP-8200 CINEMA ON-THE-GO power is off, allow 3 hours for the
battery to fully recharge. The battery will stop charging if The RMP-8200
CINEMAON-THE-GO power is on to avoid damage caused by high operating
temperature. The battery can also be charged by connecting The RMP-8200
CINEMAON-THE-GO to a computer USB port. This method will fully charge
the battery in six hours. The battery has a lifespan and ages every time it is
fully charged and discharged. The battery will gradually loose charge capacity
as it ages. Therefore, as the battery ages the battery life will decrease due to
natural loss.

7
Connections
The RMP-8200 CINEMAON-THE-GO is designed to project with built-in memory
or via expandable Micro SD card slot or connecting to other media devices.
Connecting to a Notebook or Personal Computer
Use the USB cable to connect The RMP-8200 CINEMA ON-THE-GO to
desktop computers, laptop computers, ultra-portable computers for data
transfer.
Turn on the power and read the main menu as follows:
Push the switch to side. Connect USB cable to your PC

8
When the main menu disappears, the connection succeeded and home screen
shows.
You can proceed with the data transfer.
Note:
To conserve power, The RMP-8200 CINEMA ON-THE-GO will stop projecting
an image while connected to a computer USB port.
Via Micro SD card/T Flash card
Store the files you wish to project in a Micro SD or T/F card.
lInsert the Micro SD Card/T Flash card
Pull back the cover and insert the memory card.
The memory card's electrical contacts should face up.

9
lRemove the memory card
Pull back the cover and push to release the memory card.
When the main menu disappears, the connection succeeded and you can
proceed with the data transfer.
Note:
To conserve power, The RMP-8200 CINEMA ON-THE-GO will stop projecting
an image while connected to a computer USB port.
To project, switch to side as and unplug USB cable.
The main menu will show.

10
Connecting to a Composite Video Device
Use the A/V cable to input video from camcorders, digital cameras, DVD
players, smart phone with TV-out function and digital media players into the
AV input on The RMP-8200 CINEMA ON-THE-GO .
a. Connect the AV cable to The RMP-8200 CINEMA ON-THE-GO ’sAV input.
b. Connect the other end of theAV cable to the video device’s audio
and video outputs.
Some video devices do not have the standard audio and video connections
and may require anAV cable specified by the vendor. TheAV cable allows you
to connect yourvideo device to your TV monitor or your projector.Also may be
purchased from the video device vendor. When you have theAV cable, use
the cable adapter to connect the video device cable and The RMP-8200
CINEMAON-THE-GO cable.

11
Remote control
Intended Use
The RMP-8200 CINEMAON-THE-GO is designed to operate with the
ROYALTEK-specified battery and power adapter in normal office or home
environments.
0˚–30˚C (32˚–86˚F)
10–40% RH (without condensation)
0–1829 m (0–6000 feet) above sea level
The operating environment should be free of airborne smoke, grease, oil and
other contaminants that can affect the operation or performance of The
RMP-8200 CINEMA ON-THE-GO.

12
Powering Off
Switch off the power button. From “I” side to “O”.
Status Indicator Light
The status indicator light provides information about The RMP-8200 CINEMA
ON-THE-GO ’s state.
Green：The RMP-8200 CINEMA ON-THE-GO is powered on
Amber：The RMP-8200 CINEMA ON-THE-GO is charging the battery
Red：Low battery
Blue：Key pad
Adjusting Image Size
The RMP-8200 CINEMAON-THE-GO can project a diagonal image of 8 to 60
inches (203–1524 mm).
Note:
As increases the size of the projected image, you will need to decrease
(darken) the room lighting.
Adjusting the Focus

13
Control the Brightness
The brightness mode can be accessed in setting menu . Press the right or
the left button for medium or high.
Control Volume
While playing music or video files, push the ▲button for volume up and ▼for
volume down when connected to a video or music source during video or song
playback.

14
Checking the Battery Level
The amount of charge currently in the battery displays in the status bar battery
icon at the top right of the screen.
Attaching the Tripod
The RMP-8200 CINEMAON-THE-GO includes a table-top tripod that mounts
to the bottom of the.
Tip: RMP-8200 CINEMAON-THE-GO will attach to most camera tripods.
Using the Micro SD Card Slot
The RMP-8200 CINEMAON-THE-GO has a Micro SD card slot for expanding
up to 32 GB card. You can either place files on the card before you insert it into
The RMP-8200 CINEMAON-THE-GO ’s card slot or while The RMP-8200
CINEMAON-THE-GO is connected to a USB port on a computer.
Insert Micro SD Card
Insert the Micro SD Card/T Flash card
Pull back the cover and insert the memory card. The memory card's electrical
contacts should face up.

15
Using
Main Menu
At power on, the main menu will display for choice. The RMP-8200 CINEMA
ON-THE-GO provides an easy way to view all functions with their own icon.
Each file list icon, when chosen, displays a listing of all files in the internal
memory or Micro SD card. For example, when you choose the document file
list, The RMP-8200 CINEMAON-THE-GO will display all *.doc and *.pdf files.
Main MENU
1. MP3
2. Photo files
3. Settings
Audio Option
Display Option
Timer Mode
System Option
Languages
Information
System Upgrade
4. Video files
5. AV in
6. Office Viewer
Micro SD Card: When a Micro SD card is installed in the slot, this icon will

16
display in the list. Select icon to display the contents of the Micro SD card.
Video and Audio File Support
There are many video and audio file formats. They contain various types of
encoded video and audio. The table below shows the file type and video and
audio codecs that the RMP-8200 CINEMAON-THE-GO can read the decode.
The table shows the file containers and video and audio formats that the
RMP-8200 CINEMAON-THE-GO supports. Because of differences in video
and audio encoders, some of these files that are listed may still not play.
Video Files Support
Video
Decoder Profile, Level Max. resolution & fps
Max. Bitrate
H.264 BP, L3 D1, 30fps 2Mbps
MPEG4 ASP, SP, AVC D1, 30fps 2Mbps
Audio or
Speech
Decoder Layer, Version,
or Mono/Stereo Sampling Frequency
Max. Bitrate
MP3 MPEG-1 layer 1,
2, and 3 Audio 48kHz 320kbps
Container Video Decoder Audio or Speech
Decoder
*.avi H.264, MPEG4 MP3
*.mp4 H.264, MPEG4 MP3 or AMR-NB or
AMR-WB
*.mov H.264, MPEG4 MP3 or AMR-NB or
AMR-WB
*.3gp H.264, MPEG4 AMR-NB or AMR-WB
Image
Container Audio Format Max. MPixels
*.jpg JPEG 7MB
*.bmp Bitmap 2MB
Setting
Operation

17
Play the music; the music is playing
Pause the music; the music is paused
Stereo sound is on
left channel is on
right channel is on
next - skip the music for next one
previous - back to previous one
Play all Once; This plays all music once on either the MicroSD card or internal
memory and then returns to the media file list. The play location depends on the
first song played
Shuffle play: plays music at random
Repeat this one; Plays the selected file one time and returns to the media file list
Repeat All: This plays all music continuously on either the MicroSD card or
internal memory. The play location depends on the first song played
Pause Playback
1. Press the MENU button to pause video and audio playback.
2. Press the MENU button again to resume playback.
Skip to Previous or Next File During Playback
1. Press the BACK and choose button and press to be
back to file list.
2. Press the NEXT button to skip or Press the PREVIOUS to the
previous file.
Return to File List

18
Press the BACK button to return to the Main Menu.
Photo View
The photo view displays thumbnails of files in the internal memory or the Micro
SD card. You can show one picture at a time or a slideshow, with or without
background music in the photo view
Photo File Support
The RMP-8200 CINEMAON-THE-GO can open and display bitmap (.bmp),
gif and jpeg (.jpg) files. The RMP-8200 CINEMAON-THE-GO supports up
to a 2M (two megapixel) bitmap file or a 7M (seven megapixel) jpeg file.
View a Photo
1. Use the key pad buttons to select a photo as wished to view. The
RMP-8200 CINEMAON-THE-GO will display up to 35 photo thumbnails
at a time. Press the DOWN button to see other thumbnails further down
the file list.
2. Press the MENU button to view the photo.
Skip to the Next or Previous Photo
Press the BACK button on the key pad and press the NEXT button
to skip to the next file in the file list or Press the PREVIOUS to the
previous in the file list.
Start and Pause a Photo Slideshow

19
1. Once the thumbnails is on, press button to start the photo slideshow.
2. During a photo slideshow, press BACK to pause the slideshow. Move
to and press to resume playback.
3. During a photo slideshow, press button to turn on background music
from the files in music files and press back button back to Setting
for turning off background music during slideshows.
Return to File List
Press the BACK (in amber) button to return to the photo thumbnail
view.
Settings
Audio Option – press UP and Down to select
Equalizer – Press MENU and move UP and DOWN to select your
preferred sound field from Normal, Classical, Jazz, Pop, Rock &
Bass and press Menu to confirm
Background music – Move to turn on and to turn off.
Track – Press or to select from Left, Right to Stereo
Display Option – Press UP and Down to select
Brightness – Press or to select from High to Medium
Gamma – Press or to select from MODE 0 TO 15
Timer Mode – Photo Slide Interval
Press or to select from 5, 10, 20, 30 or 60 Seconds
System Option – Press UP and Down to select
Load Default Setting – Press Yes or No to load your default Settings
Format Memory – Press “Yes” or “No” to format internal memory
press “Yes” will format memory which will lead your
files deleted.

20
Format MicroSD Card – Press “Yes” or “No” to format memory
press “Yes” will format memory of Micro SD card
which will lead your files deleted.
Languages – Press MENU and move UP and DOWN to select your
preferred language from English, Traditional Chinese, Simplified
Chinese, French, German, Spanish, Portuguese, Italian, Turkish
or Japanese.
Information – Shows model name, SW version, Manufacture Date, and
memory sizes
System Upgrade – If a software update becomes available, ROYALTEK
will post the file and instructions on the ROYALTEK
website.
The following instructions will guide you to upgrade the RMP-8200 CINEMA
ON-THE-GO.
For update, you need to
1. Copy and paste the folder (Folder name: upgrade) into the root of your
Micro SD card.
2. Insert the Micro SD card into RMP-8200 CINEMAON-THE-GO and plug in
AC adaptor.
3. Switch on the power and find the screen as below then select setting icon.