Runco Reflection VX-5000ci Operation manual

OWNER’SOPERATING MANUAL
VX-5000ci Projector
& PFP™ Controller
Widescreen Digital Light Processing™ Projector &
Pixel For Pixel™ Controller with Vivix™ Technology

Table of Contents
1
Introduction ...................................................................................................................... 3
Warnings and Safety Precautions.................................................................................. 4
Warning ........................................................................................................................ 5
Safety Tips.................................................................................................................... 5
Limited Warranty.............................................................................................................. 6
Features and Benefits .................................................................................................... 8
Projector Description ...................................................................................................... 9
Top View ...................................................................................................................... 9
Input Panel .................................................................................................................. 9
Ceiling Mount Dimensions............................................................................................ 10
Horizontal and Vertical Lens Shift................................................................................ 11
Lens Shift Range............................................................................................................ 12
Lens Adjustments.......................................................................................................... 14
ProntoNeo Remote Control Description .................................................................... 16
Battery Installation and Replacement ........................................................................ 17
ProntoNeo Remote Control Usage .............................................................................. 18
PFP Controller Description .......................................................................................... 19
Front Panel ................................................................................................................ 19
Rear Panel ................................................................................................................ 20
Quick Set-up Guide ...................................................................................................... 21
Connection Example .................................................................................................. 21
Overall Functional Description .................................................................................... 22
Menu Description and Navigation................................................................................ 23
Menu Tree .................................................................................................................. 23
Main Menu.................................................................................................................. 23
Picture Quality Adjustments ........................................................................................ 25
Main Menu.................................................................................................................. 25
Installation Menu............................................................................................................ 28
Installation Menu ........................................................................................................ 28
Lamp Mode ................................................................................................................ 28
Keystone .................................................................................................................... 28
Picture Orientation...................................................................................................... 29
IR Code Set .............................................................................................................. 29
Lamp Hours................................................................................................................ 29
System Reset ............................................................................................................ 29
Quick Menu .................................................................................................................... 30
Lens Replacement Procedure ...................................................................................... 32
Basic Troubleshooting Tips.......................................................................................... 35
RS-232 Communications .............................................................................................. 37
RS-232 Commands ........................................................................................................ 38
Dimensions .................................................................................................................... 40
Specifications ................................................................................................................ 42

2

3
Introduction
The new VX-5000ci builds off of the versatility of the VX-5000c DLP™by employing Runco's 3rd
Generation engineering practices. The GEN 3 features included with the VX-5000ci are: motorized
Reflectance Volume Regulation (RVR), digital video input with HDCP, 9 point Color Balance, and the
contrast 16:9 HD-2 DMD (Digital Micro-Mirror Device) from Texas Instruments. The remote controlled
Reflectance Volume Regulation (RVR) allows adjustable iris control of contrast ratio versus light out-
put for the best imaging performance in any viewing environment. The digital video input with HDCP
permits the signal to stay digital through the entire signal path. A 9-point color balance, accurately
adjusts color balance for some of the best gray-scale tracking available on a consumer DLP. The HD-
2 DMD generates an exceptionally high contrast ratio for high light output and better black level than
obtainable with FILM. By incorporating 5 customizable lens optics a wider range of specified throw
distances from 0.8:1 to over 7.0:1 can be projected in a large living space or concealed behind a cabi-
net. The VX-5000ci projector system also includes the PFP™Controller with VIVIX™technology
upconverting standard definition sources to virtual high Definition. For added flexibility, horizontal and
vertical lens shift allows the most versatility in placement ever available on a consumer projector.
Features
• ProntoNeo Remote Control with 3 AA batteries
• Rack Mount hardware for the PFP Controller
• Power cables (one for Projector, one for PFP Controller)
• 50’ RJ-11 phone type cable
• 6” RGBHV Extension
• D-Sub9 to RJ-11
• 3/16 Allen Tool for lens adjustment
• User’s Manual
• Warranty information
Included Accessories
• Native 1280x720, Single HD-2 16:9 DMD Chip
• GEN 3 Technology with RVR or Reflectance Volume Regulation
• 5 lens options for the most versatility of a 720p DLP
• 16:9 Widescreen Native Resolution - Designed exclusively for 16:9 aspect screens
• Multiple aspect ratio (on 16:9 screens) - Anamorphic, Letterbox, 4:3, VirtualWide
• 2500:1 Contrast Ratio
• DVI-I Input
• HDTV capable (via an outboard DTV decoder); 720 (native), 1080i, 480p, 540p
• PAL compatible
• 3:2 pulldown detection
• Horizontal and Vertical lens shift
• Vertical Electronic Keystone Correction

4
Warnings and Safety Precautions
WARNING
FCC Regulations state that any unauthorized changes or modifications to this equipment not express-
ly approved by the manufacturer could void the user's authority to operate this equipment.
CAUTION: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT REMOVE COVER.
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT'S POLAR-
IZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE
PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE
HIGH-VOLTAGE COMPONENTS INSIDE. NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
High brightness light source. Do not stare into the beam of light, or view directly. Be especially careful
that children do not stare directly into the beam of light.
WARNING
The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off.
During normal operation, when turning the power off always use the power (OFF) button on the pro-
jector or on the remote control. Ensure the cooling fan has stopped before disconnecting the power
cord. The power outlet socket should be installed as near to the equipment as possible, and should
be easily accessible.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING
THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP
FAILURE.
PRODUCT DISPOSAL
This projector utilizes tin-lead solder, high intensity discharge lamp (HID lamp) containing a small
amount of mercury. Disposal of these materials may be regulated due to environmental considera-
tions. For disposal or recycling information, please contact your local authorities or, if you are located
in the United States of America, the Electronic Industries Alliance: www.eiae.org.
INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the operation manual, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.

5
Declaration of Conformity
SAFETY TIPS
Please read and follow the safety precautions listed below to ensure the equipment is free from
damage, and to ensure that no injury will occur as a result of improper use.
· Do not insert any object, especially metal or liquids, into the Projector or PFP Controller.
· Do not place any objects containing water or any other liquid on top of the Projector or PFP
Controller.
· Do not place the units in direct sunlight, near heaters or in extremely dusty or humid locations.
· Do not install this system outdoors or otherwise exposed to the elements.
· Do not place heavy objects on top of the Projector or Controller.
· If the power cord is damaged or frayed in any way, electrical shock and/or fire may result. Please do
not place objects on the power cord, and keep the cord away from heat-emitting devices. Should the
power cord become damaged in any way, please contact your Runco Dealer for a replacement cord.
· Do not remove the cover of the Projector or PFP Controller for any reason. If any problems arise
with the unit, please contact a Runco Dealer or Runco International for service. Removing the covers
will void the warranty.
RUNCO PROJECTOR, MODEL VX-5000ci
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Some IC chips in this product include confidential and/or trade secret property belonging to Texas
Instruments. Therefore you may not copy, modify, adapt, translate, distribute, reverse engineer,
reverse assemble or discompile the contents thereof.
WARNING
INTELLECTUAL PROPERTY RIGHTS
----- IMPORTANT -----
READ BEFORE USING THE PRODUCT
• Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas
Instruments.
• Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States
and/or other countries.
• PC/AT is a registered trademark of International Business Machines Corporation in the United
States.
• Adobe Acrobat is a trademark of Adobe Systems Incorporated.
• Macintosh is a registered trademark of Apple Computer, Inc. in the United States and/or other
countries.
• Minolta is a registered trademark of Minolta Co., Ltd.
• All other company or product names are trademarks or registered trademarks of their respective
companies.

6
LIMITED WARRANTY
Congratulations on your purchase of a Runco video product and welcome to the Runco family! We
believe Runco produces “The World’s Finest Home Theater Products”. With proper installation, setup
and care, you should enjoy many years of unparalleled video performance. Please read this consumer
protection plan carefully and retain it with your other important documents.
This is a LIMITED WARRANTY as defined by the U.S. Consumer Product Warranty and Federal
Trade Commission Improvement Act.
WHAT IS COVERED UNDER THE TERMS OF THIS WARRANTY:
SERVICE LABOR: Runco will pay for service labor by an approved Runco service center when need-
ed as a result of manufacturing defect for a period of two (2) years from the effective date of delivery
to the end user.
PARTS (Not including projector lamp): Runco will provide new or rebuilt replacement parts for the
parts that fail due to defects in materials or workmanship for a period of two (2) years from the effec-
tive date of the warranty. Such replacement parts are then subsequently warranted for the remaining
portion (if any) of the original warranty period.
LAMP: Six months or 1000 hours (which ever comes first).
WHAT IS NOT COVERED UNDER THE TERMS OF THIS WARRANTY:
This warranty only covers failure due to defects in materials and workmanship that occur during nor-
mal use and does not cover normal maintenance. This warranty does not cover cabinets or any
appearance item; any damage to laser discs; failure resulting from accident, misuse, abuse, neglect,
mishandling, misapplication, faulty or improper installation or setup adjustments; improper mainte-
nance, alteration, improper use of any input signal; damage due to lightning or power line surges,
spikes and brownouts; damage that occurs during shipping or transit; or damage that is attributed to
acts of God. In the case of remote control units, damage resulting from leaking, old, damaged or
improper batteries is also excluded from coverage under this warranty.
CAUTION: DAMAGE RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER INSTALLATION
OR SETUP IS SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. IT IS
IMPERATIVE THAT INSTALLATION AND SETUP WORK BE PERFORMED ONLY BY AN AUTHO-
RIZED RUNCO DEALER TO PROTECT YOUR RIGHTS UNDER THIS WARRANTY. THIS WILL
ALSO ENSURE THAT YOU ENJOY THE FINE PERFORMANCE YOUR RUNCO PRODUCT IS
CAPABLE OF PROVIDING WHEN INSTALLED AND CALIBRATED BY RUNCO AUTHORIZED PER-
SONNEL.
RIGHTS, LIMITS AND EXCLUSIONS:
Runco limits its obligations under any implied warranties under state laws to a period not to exceed
the warranty period. There are no express warranties. Runco also excludes any obligation on its part
for incidental or consequential damages related to the failure of this product to function properly.
Some states do not allow limitations on how long an implied warranty lasts, and some states do not
allow the exclusion or limitation of incidental or consequential damages. So the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights that vary from state to state.
Limited Warranty

7
EFFECTIVE WARRANTY DATE:
This warranty begins on the effective date of delivery to the end user. For your convenience, keep the
original bill of sale as evidence of the purchase date.
IMPORTANT: WARRANTY REGISTRATION:
Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach
you promptly if we should discover a safety problem or product update for which you must be notified.
TO OBTAIN SERVICE, CONTACT YOUR RUNCO DEALER:
Repairs made under the terms of the Limited Warranty covering your Runco International video prod-
uct will be performed at the location of the product, during usual working hours, providing location of
product is within normal operating distance from a Runco Authorized Service Center. If, solely in
Runco’s judgement, location of product to be repaired is beyond normal operating distance of the
closest Runco Authorized Service Center, it is the owner’s responsibility to arrange for shipment of the
product for repair. These arrangements must be made through the selling Runco dealer. If this is not
possible, contact Runco directly for a return authorization number and shipping instructions. Runco
will return product transportation prepaid in the United States, unless no product defect is discovered.
In that instance, shipping costs will be the responsibility of the owner.
ADDITIONAL INFORMATION:
To locate the name and address of the nearest Runco Authorized Service location, or for additional
information about this warranty, please call, write or visit our website:
CUSTOMER SERVICE DEPARTMENT
RUNCO INTERNATIONAL
2900 Faber Street
Union City, CA 94587
Ph: [phone] / Fax: [phone]
www.runco.com

Features and Benefits
The VX-5000ci system is a very unique system and has many important features, including:
• Native 1280 x 720, Single HD-2, 16:9 DMD™ Chip creates images with appropriate black levels in
darkened scenes.
• DVI input allows digital connections for a richer pixel for pixel and unadjusted signal.
• RVR or Reflectance Volume Regulation, a GEN 3 engineering advancement. It allows the Installer
to adjust light output vs. contrast ratios for proper image quality in any viewing environment.
• Full control of the Projector via the PFP Controller. This control includes all image quality
adjustments as well as Projector adjustments such as image configuration.
• 1500 ANSI lumens light output.
• Lamp life of approximately 2000 hours.
• An adaptive two-dimensional comb filter that greatly reduces artifacts when using Composite video.
• A Luma edge enhancement circuit makes the edges of objects appear sharper without the
ringing and noise associated with traditional sharpness circuits.
• A Chroma edge enhancement circuit is included to compensate for lower chroma resolution
found in composite and S-Video.
• Inverse telecine (3:2 pulldown) detection and processing allows the scaler to completely eliminate
interlace artifacts associated with scalers and film to video source materials.
• A Time Base corrector circuit is provided for unstable sources such as VCRs.
• 12v outputs for drop screens and screen masking.
• Automatic switching between NTSC and PAL signals.
• Fully RS-232 controllable, with direct access to sources and aspect ratios.
• A simple remote controls all aspects of operation, and includes discreet on/off, aspect ratio
and source selection commands.
• Input 5 terminal for DVI (Digital, Computer RGB and Component)
• Horizontal and Vertical lens shift (including manual adjustments) for placement versatility.
• Vertical Electronic Keystone Correction
• 5 lens options to meet any throw distance specification.
• Motorized zoom and focus for accurate installation and long throw distance.
(Not available with 0.8:1 Fixed Lens)
• Programmable ProntoNeo remote control.
8