Sencor SLE 1960 User manual

LED Television
operation. Keep it for future use. Record the model number and
the serial number of the television. See the label on the rear cover
and provide this information to your vendor in the event that you
require repairs.
SLE 1960

EN
2
???Table of Contents
Important safety measures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
1. Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2. Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
3. Connecting and setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. Selecting an input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5. Initial setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6. Using the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.1 Picture (Picture) menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.2 Sound (Sound) menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.3 Channel (Channel) menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6.4 Lock (Lock) menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
6.5 Setup menu (Setup). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
7. USB control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
7.1 Photo (Photos) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
7.2 Music (Music). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
7.3 Movie (Movie) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
7.4 Text (Text). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
8. Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
9. Technical specications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
10. Information sheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

EN
3
Important safety measures
If you want to use this product correctly, carefully read this user'smanual and store it for future
reference. If you give (sell) the appliance to somebody, please also include all the documentation
together with this appliance, including this user'smanual.
The ash symbol in an equilateral triangle indicates that there is dangerous voltage inside
this appliance, which presents arisk of injury by electrical shock.
The exclamation mark in an equilateral triangle symbol indicates important operating or
servicing instructions in the appliance'sdocumentation.
To reduce the risk of injury by electrical shock do not remove the cover (or the rear side). There are
no components inside which the user can repair. Have all repairs or adjustments performed at an
authorised service centre.
GENERAL SAFETY INSTRUCTIONS
• Carefully read this manual before using the appliance. Follow the instructions contained in this
user'smanual.
• Heed all warnings.
• Adhere to all instructions.
• Use only accessories determined by the manufacturer.
• AN OPEN FLAME MUST NOT BE PLACED ON THE APPLIANCE, E.G. ABURNING CANDLE.
DO NOT PLACE HOT ITEMS OR OBJECTS WITH AN OPEN FLAME E.G. CANDLES OR NIGHT
LAMPS ON OR IN THE VICINITY OF THE APPLIANCE. HIGH TEMPERATURES MAY MELT
PLASTIC PARTS AND CAUSE AFIRE.
• Use the appliance in atemperate climate zone.
• Under no condition does the manufacturer or the vendor of the appliance take responsibility for
any direct or indirect damages caused by not adhering to instructions for installation, setup, use,
service or cleaning of this appliance as described in this user'smanual.
• Protect the appliance against being knocked, dropped, hit and shaken and against vibrations,
humidity and dust.
• Before allowing children to use the appliance, they must be appropriately to their age, informed
about the correct and safe use of the player.
• If the appliance is equipped with aheadphone jack, do not use headphones set to an extreme
volume. There is adanger of hearing damage or loss.
Installation, operation
• Install the appliance according to the instructions in the user'smanual.
• Leave free space on all sides of the appliance necessary for proper air circulation. This removes the
heat created during operation. Covering the ventilation openings of the appliance'scase creates
arisk of overheating or damaging the appliance. It is necessary to ensure that the ventilation
openings are not blocked, e.g. by anewspaper, table cloth, curtain, etc. Follow the installation
instructions in the user'smanual.
• This appliance should not be located in aconned area such as abookshelf or rack, if sucient
ventilation is not provided for or the instructions of the manufacturer are not followed.
• Never insert any items into any ventilation or other openings because they could come into
contact with points with dangerous voltage levels or cause ashort circuit of parts, which could
cause are or injury by electric shock. Never pour any liquid into the appliance.
• Do not install the appliance in direct sunlight or near sources of heat, such as heaters, heat
exchangers, stoves or other appliances (including ampliers) producing heat. High temperatures
signicantly reduce the lifetime of electronic components in the appliance. Do not use or leave the
appliance in the vicinity of an open re.

EN
4
• The appliance must not be exposed to dripping or running water and objects lled with water
must not be placed on it, e.g. vases. Protect the appliance against rain, spray or contact with any
other liquid, do not leave or install the appliance outdoors. Do not use the appliance outdoors. Not
adhering to these instructions creates arisk of electrical shock or re hazard.
• Do not use this appliance near water.
• Treat the glass panel and appliance cover with care. The screen glass can break on impact and
cause serious injuries.
• Make sure that the power cord is not stepped on or compressed, particularly near the power plug,
power socket and at the point where it exits the appliance or the adapter. The power plug (adapter)
is used as adisconnection device and must be easily accessible.
• Never use aappliance with adamaged power cord or plug. If the power cord or plug are damaged,
turn o the appliance, disconnect it from the power source and contact an authorised service
centre. Adamaged power cord or plug may only be replaced by qualied personnel. Under no
circumstances attempt to replace the power cord or plug yourself.
• Do not attempt to circumvent the polarised power plug safety feature. If the power plug cannot
be inserted into your power socket, contact aqualied electrician to replace the old type of power
socket.
• Before connecting the appliance into apower socket, check that the voltage in your power socket
corresponds to the voltage on the rating label of the appliance or on its power adapter. If you are
not certain about the type of the power sources in your home, contact your vendor or the local
energy company.
• Before turning on the appliance, check that the electrical connection is performed properly and
in accordance with the instructions of the manufacturer. Before connecting or changing the
connection, turn o the appliance and disconnect it from the mains.
• Remember to always disconnect the power plug (adapter) from the power socket before
disconnecting the power cable from the rear side of the appliance.
• Insert the power plug into aindependent power socket. Do not overload wall sockets with
extension cords or multi-socket adapters. There is arisk of injury by electric shock.
• When disconnecting, hold the power cord by the plug and not by the cord itself.
• Disconnect the appliance from the power socket during storms or if you will not be using it for
alonger time.
• Avoid moving the appliance from acold environment to awarm one or vice versa, or when using
the appliance in avery humid environment. Air humidity may condense on some components
inside the case of the appliance and the appliance may stop working temporarily. If this occurs
leave the appliance in awarm and well ventilated place and wait 1 – 2 hours until the moisture
evaporates and the appliance can once more be used as usual. Take care especially during the rst
use of the player immediately after its purchase during acold season.
• Do not place this appliance on an unstable cart, pedestal, stand, bracket or table. The appliance
could fall and cause serious injuries to children or adults or could be seriously damaged or
damage other items. Only use the appliance with acart, pedestal, stand or table designated by
the manufacturer or sold with the appliance. Any mounting of the appliance should be carried out
according to the manufacturer'sinstructions and the mounting accessories recommended by the
manufacturer should be used.
• Do not lean on the appliance, do not lean over it or use it as astep. Protect it against violent
movements. Ensure that children do not play with the appliance.
If using the cart, be careful when moving it. Stopping suddenly, excessive force and uneven
surfaces could cause the cart to fall over with the appliance.
• Neither the manufacturer nor the vendor of the appliance under any condition takes responsibility
for any direct or indirect damages caused by not adhering to the instructions for installation, setup,
use, service or cleaning of this appliance as described in this user'smanual.
• Protect the appliance against being knocked, dropped, hit and shaken and against vibrations,
humidity and dust.
• Do not expose the appliance to extreme temperatures or humid conditions.
Important safety measures

EN
5
Note:
If the appliance is powered by an adapter, use only the adapter and AC power cord supplied with the
appliance. Do not use faulty power sockets. Check that the power plug is properly inserted into the
power socket. If the power plug is loose, arching could result in are. Contact aqualied electrician to
have your socket replaced.
Note:
Only connect the appliance to aproperly grounded socket with aprotective grounding pin.
Note:
If you will be installing the appliance on awall or to the ceiling, follow the manufacturer'sinstruction
found in the user'smanual of the particular appliance.
Repairs and maintenance
• To prevent risk of injury through electric shock or the creation of are, do not take the appliance
out of the case - there are no parts inside the case repairable or adjustable by the user without
appropriate equipment and qualications. Should the appliance require adjustment or repair,
contact aprofessional service centre.
• In the case of any unusual events occurring during the use of the appliance, e.g. if there is adistinct
smell of burning insulation or smoke comes out of the appliance, immediately turn o the
appliance, disconnect the appliance from the power source and do not use the appliance until you
have received the results of an inspection by the employees of the professional service centre.
• Have all repairs carried out by qualied personnel. Repairs are necessary if the appliance has
been damaged in any way, for example if the power cord is damaged, liquid was poured on the
appliance, foreign objects have entered the appliance, the appliance has been exposed to rain or
moisture, if the appliance is not working as usual or if it has fallen.
• In the event of repair or replacement of apart of the appliance, ensure that the service technician
uses components designated by the manufacturer or that these components have the same
specications as the original ones. Unauthorised replacements could cause are, lead to adanger
of injury by electrical shock or other dangers.
• Before cleaning, carrying or other maintenance, disconnect the plug (adapter) from the power
socket.
• Clean the appliance only with adry cloth.
• For cleaning do not use petrol, thinners or any other solvents or use any abrasive cleaning agents,
steel wool or any sponges with steel wool.
Note:
Do not throw the appliance into ordinary household waste. For disposal follow all local laws and
regulations.
Remote control and batteries
• Do not expose the remote control or the batteries to direct sunlight or sources of heat, such as
heaters, heat exchangers, stoves or other appliances (including ampliers) that produce heat. Do
not use or leave the appliance in the vicinity of an open re.
• Ensure that the sensor is not exposed to astrong light source (e.g. sunlight) or light from
uorescent light tubes, which could reduce the eectiveness and reliability of the remote control.
• Neither the remote control nor the batteries may be exposed to dripping or running water and
objects lled with water must not be placed on them, e.g. vases. Protect against exposure to rain,
spraying or pouring of any kind of liquid. Do not use outdoors. Not following these instructions
creates adanger of damage to the remote control or to the battery.
• Do not use this appliance near water.
• It is necessary to pay attention to the environmental impact aspects of battery disposal.
Important safety measures

EN
6
Important safety measures
• The incorrect use of batteries may cause the leakage of the electrolyte and corrosion. To ensure
that the remote control works correctly, proceed according to the instructions below:
- Do not insert the batteries in the wrong polarity orientation.
- Do not charge, heat, open or short circuit the batteries.
- Do not throw batteries into are.
− Do not leave discharged batteries in the remote control.
- Do not combine various types of batteries or new and old batteries.
- If you will not be using the remote control for alonger period of time, remove the batteries to
prevent potential damage caused by asubsequent battery leakage.
- If the remote control is not working correctly or its operational range is reduced, change all
batteries for new ones.
- If electrolyte leaks out from the batteries, have the remote control cleaned by an authorised
service centre.
Attention: To prevent are hazard or injury by electrical shock, do not expose this appliance to rain or
humidity.
Attention: Batteries must not be exposed to excessive heat, for example sunlight, re, etc.
This symbol indicates that the appliance has double insulation between the dangerous mains
voltage and the parts accessible to the user. In the event of repairs use only identical spare
parts.
Supplement to the LCD TV user'smanual
Measures to take when astatic image is displayed; red/blue/green pixels on the screen
Astatic image can permanently damage the display part of the television
• Do not leave a static image on an LCD screen for longer than 2
hours, because this could damage the screen. This type of damage
is known as "screen burn-in".
• Similar damage to the LCD screen can be caused by a statically
located TV channel logo.
• Watching television in 4:3, 16:9 formats or similar (formats not
covering the entire area of the screen) for along time may leave marks on the right or left side, or
possibly in the middle of the picture as aresult of the dierences in light emission. Similar damage
may also occur when watching aDVD or playing games.
• The display of a static image from video games or computers for an extended period of time
may cause apartial eect of a"persistent image". To prevent this eect from occurring, lower the
brightness and contrast when displaying astatic picture.
Damage to the screen resulting from the above mentioned causes is not covered by the warranty!
Red/blue/green/black pixels may appear on the screen
• This is a characteristic feature of liquid crystal displays and does not represent a problem. LCD
screens are manufactured using avery precise technology in order to achieve avery ne picture
resolution. From time to time several inactive pixels may appear on the screen as apermanently red,
blue, green or black pixel (up to 0.001% of the total number of pixels on the screen). This does not in
any way aect the features and performance of your television.

EN
7
Important safety measures
Notes on the USB connector:
USB memory devices must be inserted into the appliance directly. To prevent data transmission failure
or its interference, do not use USB extension cables. Electrostatic discharges may cause the appliance to
malfunction. In such an event the user must restart the appliance.
Before using aUSB ash drive test its ability to communicate with the appliance and its data reading
and writing speed.
To achieve maximum reading speed we recommend that you keep disk space defragmented. Use the
FAT32 le system, asingle partition, without protection. If reading and writing on the USB memory
device is not continuous, undesirable eects may occur such as partial image loss (distortions/
checkering eects) or complete image loss, audio defects, and in extreme cases the operation will be
stopped. Unexpected behaviour of the connected memory device, or the presence of viruses or other
damaging software may cause the functions of the appliance to stop working, necessitating arestart.
The USB connector is the standard type and is not able to power aUSB device with ahigh power usage
(e.g. hard disk drives HDD). Use devices with independent power supplies and power them from their
own power supplies.
The appliance was designed to achieve maximum compatibility with memory devices. With respect to
the variety of devices on the market it is not possible to guarantee compatibility with every USB device.
In the event of diculties try formatting the ash drive directly in the appliance. If problems persist, use
adierent ash drive.
Due to the wide range of USB devices available on the market it is not possible to guarantee the
compatibility of the appliance with all USB devices.
Serial number of the appliance
The serial number of the appliance is unique and unequivocally identies your appliance.
Enter the serial number of your appliance together with other details necessary for the denite
identication of your appliance below.
Serial number: ______________________________________
Date of purchase: ____________________________________

EN
8
1. Description of the appliance
IR remote control sensor
Power indicator
Description of the appliance
INPUT button

EN
9
2. Remote control
1. STANDBY button
Turns the television on from the stand-by mode.
2. SOURCE button
Press to select the desired input.
3. Numerical buttons 0-9
Press 0-9 to directly select aTV channel while watching
the TV.
In teletext mode enter the page number, etc.
4. FAV button
Press in the TV mode to enter / exitthe favourites
menu.
5. button
Button for switching to the previously watched
channel.
6. SMODE button
Repeatedly press to select asound mode.
7. PMODE button
Repeatedly press to select apicture mode.
8. SLEEP button
Set the automatic shut o time for the television.
9. TV/RADIO button
Switching between the television and radio modes.
10. DISPLAY button
Button for displaying the source and information about
channels.
11. ////OK buttons
Used for navigating in amenu on the screen and for
setting up the television according to your preferences.
12. MENU button
In TV mode it displays the LCD television'smain menu.
13. EXIT button
Function for exiting amenu or ascreen.
14. MUTE button
Press to mute the sound. Press it again to renew the
sound or press VOL +.
15. EPG button
Press to show/hide the electronic program guide.
16. VOL +/- buttons
Press to increase/decrease the volume.
17. CH +/- buttons
Press to switch between individual channels.
18. MEDIA button
Press to switch to the Media (USB) mode.
19. T.SHIFT button
It is used to start recording with atime shift
(i.e. time shift). Function is only available in the DTV
mode.
Remote control

EN
10
20. REC button
Used to start recording (only in DTV mode).
21. AUDIO button
DTV/MEDIA mode: select abackground sound, if
available.
ATV mode: select asound mode: Stereo/Dual I/
II/Mono.
Other sources: select the left / right channel
22. SIZE button
Press SIZE to change the size of the screen in the
MEDIA mode.
23. REVEAL button
Press REVEAL to display or hide hidden teletext
information (depends on the broadcast).
24. TTX button
Turn teletext on or o.
Note: The teletext function is optional and the
availability of buttons depends on the model.
Teletext information fully depends on the
operator of the channel.
25. HOLD button
Freezes the current picture.
26. SUBPAGE button
Press to enter ateletext subpage.
27. RECLIST button
Enter the list of recordings
28. SUBTITLE button
Button for showing / hiding subtitles in the
bottom part of the screen, if they are available.
29. ///////MIX buttons
: start / pause playback, start timeshift
recording function.
: Stop recording / playback.
: Fast rewind
: Fast forward
: Skip to previous track
: Skip to next track
MIX: TV picture and teletext content are
simultaneously displayed on the screen.
30. RED, GREEN, YELLOW, BLUE button:
corresponds to various colour functions in the
menu or teletext.
Note:
Remove the batteries if you will be storing the
appliance or not using it for an extended period
of time.
• To control the appliance using the remote
control, point the remote control at the
appliance and then press the button with
the required function. The eective range of
the remote control is up to about 5 meters
with amaximum deviation of +/- 30° from
the perpendicular direction to the reception
sensor of the remote control on the front
side of the appliance. The falling capacity of
the batteries gradually reduces the remote
control range. There must be no solid
obstacles in the area between the remote
control and the appliance when the remote
control is being used.
• During standard use the lifetime of batteries
in the remote control is about 1 year. When
the eective range of the remote control
is substantially reduced or when there are
problems with its use, change both the
batteries in the remote control. If you will
not be using the remote control for alonger
period of time, take out both batteries - in
this way you will prevent potential damage
caused by their leakage.
• Prevent strong light from falling on
the appliance, (e.g. sunlight or strong
uorescent lamps or ecological light bulbs),
which could reduce the eectiveness and
reliability of the infrared remote control.
Remote control

EN
11
Connecting and setting up
YVideo (yellow AV)
RAudio right (red AV)
WAudio left (white AV)
GComponent Y (green)
BComponent Pb (blue)
RComponent Pr (red)
Connecting and setting up

EN
12
Installing cables
Please carefully read the entire user'smanual before installation and operation.
1. Take the TV out of the packaging and place it on an even rigid surface.
Note:
Before connecting or disconnecting aTV, computer or other devices it is necessary to check that the
power cord is disconnected. When disconnecting power or signal cables, hold the cable by the end,
never pull on the cable itself.
2. An IEC antenna connector can be connected with the VF television input connector.
3. The AV output connector DVD can be connected with the television'sAV output using an AV cable.
4. Connect one end of the VGA cable to the VGA port on the computer and the other end of the
VGA cable to the VGA port on the television and on both ends tighten the screws in the clockwise
direction.
Note:
When connecting the 15-pin VGA connector, do not use excessive force so as not to damage the
individual pins.
5. Connect one end of the HDMI cable to the HDMI device and the other end of the HDMI cable to the
TV.
Note:
When connecting HDMI cables ensure that the correct orientation is maintained and do not use
excessive force so as not to damage the individual pins.
6. Check that all AV cables are correctly inserted into the corresponding ports.
7. To these connectors connect the input or output SCART connector of the external device.
8. Connect the power cord to apower socket with avoltage of 110 – 240 V~.
Note:
The permitted power voltage range for this TV is 12 V. Do not connect the TV to apower source outside
of this range.
When connecting and disconnecting the power cord, hold the plug by the insulated part and do not
touch the metal parts of the plug.
Connecting and setting up

EN
13
Selecting an input source
4. Selecting an input source
Press the SOURCE button to show the input source list.
Use the /or SOURCE buttons to select the required input source.
Press the OK button to conrm the input source.
Press the EXIT button to exit the menu.

EN
14
5. Initial setup
Use an antenna cable to connect the television (RF-IN input) with the antenna socket.
OSD Language (OSD language)
Use the /buttons to select alanguage for the menus and messages.
Mode Setting (Mode settings)
Use the /buttons to select amode.
Country (Country)
Use the /buttons to select the country of installation.
Antenna Type (Antenna type)
Use the /buttons to select the antenna type.
Auto Scan (Automatic search)
Use the /buttons to select amode: DTV + ATV, DTV or ATV.
Auto Tuning Status (Auto tuning status)
The rst tuning is digital. To leave out digital tuning, press the MENU button.
The second tuning is analogue. To leave out analogue tuning, press the MENU button.
Initial setup

EN
15
6. Using the menus
6.1 Picture (Picture) menu
Press MENU to show the main menu.
Use the /buttons to select Picture (Picture) and enter the menu by pressing the OK/button.
1. Press /to select the desired item that you wish to modify.
2. Use the OK//button to make the settings.
3. After completing setup, press the MENU button to save and to return to the previous menu.
Picture Mode (Picture mode)
Use the /buttons to select the item Picture Mode (Picture mode) and the /buttons to select
amode. In the menu there are the following modes: Standard (Standard), Mild (Mild), Personal
(Personal), Dynamic (Dynamic).
Brightness (Brightness) /Contrast (Contrast) /Sharpness (Sharpness) /Saturation (Saturation) /
Hue (Hue)
Use the /buttons to select an option and the /buttons to perform the setting.
Brightness (Brightness) Set the brightness of the entire picture.
Contrast (Contrast) Set the picture contrast, nevertheless the hue of the picture will remain
the same.
Sharpness (Sharpness) Set the sharpness of the picture details.
Saturation (Saturation) Set the colour saturation.
Hue (Hue) Set the colour hue used in NTSC mode.
Color Temperature (Colour temperature)
Serves to change the colour spectrum of the picture.
Use the /buttons to select the item Color Temp (Colour temperature) and change the settings
using the /buttons. In the menu there are the following modes: Standard (Standard) /Cool (Cool)
/Warm (Warm).
Standard (Standard) The result is avivid picture.
Cool (Cool) The result is aslightly blueish hue of the picture.
Warm (Warm) The result is areddish hue of the picture.
Aspect Ratio (Side aspect ratio)
Use the /buttons to select Aspect Ratio (Side aspect ratio) and the /buttons to select the
respective side aspect ratio.
Auto (Automatic) Automatic side aspect ratio setting depending on the size of the TV and
the program that is being broadcast.
Full /4:3 /Zoom 1 /Zoom 2 Select depending on the recommended format.
PC Setting (PC settings)
Press the INPUT button and select PC.
Press the MENU button to enter the main menu, then use the /buttons to select PICTURE (Picture).
Press the OK/button to enter the menu and then use the button to select PC Setting (PC Settings).
Using the menus

EN
16
Using the menus
Use the /buttons to select an item and set the value using the /buttons.
Auto Adjust (Automatic adjustment) Press the MENU/button to automatically set the optimal
picture position.
H position (H position) Set the horizontal position of the picture
Vposition (Vposition) Set the vertical position of the picture
Phase (Phase) Minimum horizontal distortion
Clock (Clock) Minimum vertical distortion
Screen Mode (Screen mode)
Use the /buttons to select the HDMI mode, then use the /buttons to select Auto (Automatic),
Video (Video) or PC (computer). These option are only available in the HDMI mode.
Advanced Settings (Advanced settings)
Perform advanced settings to ne tune the picture.
Use the /buttons to select Advanced Settings (Advanced settings) and the OK /button to enter
the submenu.
NR (Noise reduction)
Set the picture noise reduction option. Use the /buttons to select option NR and the /buttons to
select the mode.
O (O) Noise reduction will be o.
Weak (Weak) Detection and reduction of weak picture noise.
Medium (Medium) Detection and reduction of medium picture noise.
Strong (Strong) Detection and reduction of strong picture noise.
Dynamic Contrast (Dynamic contrast)
Automatic picture detail and brightness settings Use the /buttons to select Dynamic Contrast
(Dynamic contrast) and the /buttons to select the desired mode. The following option are
available: O (O), Weak (Weak), Medium (Medium), Strong (Strong).

EN
17
Using the menus
6.2 Sound (Sound) menu
Press MENU to show the main menu.
Use the /buttons to select Audio (Audio) and enter the menu by pressing the OK/button.
1. Press /to select the desired item that you wish to modify.
2. Use the OK//button to make the settings.
3. After completing setup, press the MENU button to save and to return to the previous menu.
Sound Mode (Sound mode)
Use the /buttons to select Sound Mode (Sound mode) and use the /buttons to select an audio
mode. The following option are available: Standard (Standard), Music (Music), Personal (Personal),
Movie (Movie).
Treble (Treble) /Bass (Bass) /Balance (Balance)
Use the /buttons to select an item and the /buttons to make asetting.
Treble (Treble) Set the treble for the sound. Increase or decrease the high tones.
Bass (Bass) Set the bass for the sound. Increase or decrease the low (deep) tones.
Balance (Balance) Set the balance of the left and right loudspeaker for the desired playback.
Surround sound (Surround sound)
Use the /buttons to select Surround Sound (Surround sound) and use the /buttons to select
On (On) or O (O).
EQ Setting (Equaliser settings)
You can choose from up to 7 equaliser bands.
Use the /buttons to select EQ Setting (Equaliser settings) and use the OK/button to enter the
submenu.
EQ Mode (Equaliser mode)
Use the /buttons to select EQ Mode (Equaliser mode) and use the /buttons to select amode.
The following option are available: O (O), Rock (Rock music), Pop (Pop music), Jazz (Jazz music),
User (User).

EN
18
Using the menus
AVL (Automatic volume limiter)
Set the automatic volume control function. Use the /buttons to select AVL and then use the /
buttons to select On (On) or O (O).
SPDIF
Use the /buttons to select SPDIF and then use the /buttons to select O (O) /Auto
(Automatic) /PCM.
Audio Description (Audio description)
Use the /buttons to select Audio Description (Audio description) and then use the OK/button
to enter the submenu.
In it you can turn the Audio Description on (On) or o (O) and set the volume ratio of astandard audio
track and audio description track.
Note:
The audio description is placed in the broadcast by the TV station. Find out which TV stations and which
programs have audio description available.
Mode (Mode)
Use the /buttons to select Mode (Mode) and then use the /buttons to select On (On) or O
(O). When the mode is on, the volume may be set by the user.
Sound Type (Sound type)
Use the /buttons to select Sound Type (Sound type) and then use the /buttons to select
amode. The following option are available: Stereo /Dual I, Dual II, Mixed (mixed).

EN
19
Using the menus
6.3 Channel (Channel) menu
Press MENU to show the main menu.
Use the /buttons to select Channel (Channel) and enter the menu by pressing the OK/button.
1. Press /to select the desired item that you wish to modify.
2. Use the OK button to enter the submenu.
3. After completing setup, press the MENU button to save and to return to the previous menu.
Tuner Type (Tuner type)
Use the /buttons to select Tuner Type (Tuner type) and then use the /buttons to select
Antenna (Antenna) or Cable (Cable).
Auto Scan (Automatic search)
Use the /buttons to select Auto Scan (Automatic scanning) and then use the OK/button to
enter the submenu.
Tuner type Antenna Tuner type Cable
Country (Country)
Use the /buttons to select acountry.
Mode (Mode)
Use the /buttons to select amode.
Scan Type (Scan type)
Use the /buttons to select the scan type: Advanced (Advance), Quick (Quick), Full (Full).
Network ID (Network ID)
Use the /buttons to select the network ID: Auto (Automatic) or enter anumerical value.
Frequency (Frequency)
Use the /buttons to select afrequency. Auto (Automatic) or enter anumerical value.
Symbol Rate (Symbol Rate)
Use the /buttons to select the symbol rate: Auto (Automatic) or enter anumerical value.
Start
Press the OK/button to start the automatic scan. The television will rst scan the digital channels
and thereafter the analogue channels. Before launching the automatic scan, it is necessary to select an
antenna. An incorrectly set antenna may result in certain channels not being found. The number of the
found channels does not include coded channels.

EN
20
Using the menus
Manual Scan (Manual search)
Use the /buttons to select Manual Scan (Manual scanning) and then use the OK/button to enter
the submenu.
Digital Manual Scan (Digital Manual Search)
Use the /buttons to select Digital Manual Scan (Digital manual scanning) and then use the OK/
button to enter the submenu.
Tuner type Antenna Tuner type Cable
Network ID (Network ID)
Use the /buttons to select the network ID: Auto (Automatic) or enter anumerical value.
Frequency (Frequency)
Use the /buttons to select afrequency. Auto (Automatic) or enter anumerical value.
Symbol Rate (Symbol Rate)
Use the /buttons to select the symbol rate: Auto (Automatic) or enter anumerical value.
Modulation (Modulation)
Use the /buttons to select the modulation type: Auto (Automatic), 16QAM, 32QAM, 64QAM,
128QAM, 256QAM.
Start
Press the OK/button to start the automatic scan.
Analogue Manual Scan (Analogue manual search)
Use the /buttons to select Analogue Manual Scan (Analogue manual scanning) and then use the
OK/button to enter the submenu.