Sevenoak SK-A7C2 User manual

SK-A7C2
Warnings
Components:
Features:
Limited One-year Warranty
Sevenoak provides a limited warranty that this product
is free from defects in materials and workmanship to
the original purchaser under normal use for a period of
one (1) year from the original purchase date or thirty
(30) days aer replacement (the “Warranty Period”),
whichever occurs later. Our responsibility with respect
to this limited warranty shall be limited solely to repair
or replacement, at its opon, of any product which fails
during normal consumer use.
To obtain warranty coverage during the Warranty
period, contact your place of purchase (”Seller”) to
obtain a return merchandise authorizaon (”RMA”)
number, and return to Seller the defecve product
along with proof of purchase and the RMA number.
This warranty does not extend to damage or failure
which results from misuse, neglect, accident,
alternaon, abuse, improper installaon or
maintenance. EXCEPT AS PROVIDED HEREIN,
SEVENOAK MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specific
legal rights, and you may also have addional rights
which vary from state to state.
1. Top hand grip
2. Top hand grip connector
3. Main body
4. 1/4” camera locking screw
5. Quick release plate
6. HDMI plug protector
7. Micro HDMI adapter cable
8. Base plate
9. 2*15mm standard rods
10. M4 Screws
11. Allen Key
■ Form-fing cage
■ Aluminum construcon
■ Comfortable wood grip
■ Removable top hand grip
■ Quick release plate
■ Built in 1/4” and 3/8” mounng points
■ Built in cold shoes
■ A pair of 15mm standard rods
■ Full access to camera’s controls, buons, memory slot
and baery
■ Can use together with baery grip and sony microphone
Cage Kit for Sony A7, A7S, A7R, A7 II，A7S II， A7R II
SK-A7C2 is a portable aluminum cage kit built for the
Sony A7, A7S, A7R, A7 II, A7S II, A7R II which adds
protecon, stability and mounng opons to the
camera. It includes form fing camera cage, wood grip,
top hand grip, micro HDMI adapter cable, HDMI plug
protector, quick release base plate, cold shoes, 1/4” and
3/8” mounng points etc. The form fing camera cage
allows full access to the camera’s controls, buons,
baery and SD card slot. The cold shoes, 1/4” and 3/8”
mounng points allows you to mount different
accessories.
The HDMI plug protector frees you from worrying about
wearing out or damaging the micro HDMI port by
repeatedly plugging or replugging a micro HDMI cable
into your camera body. It also helps to prevent your
HDMI cable from accidentally coming unplugged during
a shoot which is parcularly important when using an
external monitor or recorder.
The comfortable wood grip and removable top hand
grip enable users to switch from one to the other easily
for different shoong requirement. The built in 1/4” and
3/8” mounng points as well as two cold shoes on the
top hand grip enables users to mount various kinds of
useful accessories.
The cage also comes with quick release base plate and a
pair of 15mm standard rods that allows you to remove
and remount the camera from the rods easily and
quickly. With 1/4” and 3/8” mounng points on the
quick release plate, the cage can be easily mounted
onto or removed from a tripod, rig or other device. ■ Please read and follow these instrucons, and keep
this manual in a safe place.
■ Handle the unit with care.
■ Clean the unit with a so, dry cloth.
■ Use only parts provided by the manufacturer.
■ Make sure everything is secure before proceeding.
■ Make sure the item is intact and that there are no
missing parts.
■ Do not exceed the maximum load capacity.
■ All photos are for illustrave purposes only.
换图
换
图
换图

Instrucon Manual:
Step 1:
Use the included Allen key and three M4*6 screws to
install the top hand grip and the top hand grip
connector as shown in the below picture, ensure the
screws are ghtened.
Step 2:
Use the Allen key and two M4*8 screws to aach the
top hand grip to he main body as shown in the following
picture, ensure the screws are ghtened.
Step 5:
Aach the HDMI plug protector to the main body as
shown in the following picture, use two M4*14 screws
and Allen key to lock the HDMI plug protector, make
sure the screws are securely locked.
Step 3:
Turn the cage and camera upside down, put the camera
into the cage, make sure the camera locking screw point
is right under the locking point on the cage (see
following picture), use the 1/4” screw to lock the
camera, you may need to use a coin to ghten the
screw, make sure the camera is securely fastened.
Step 4:
Use two M4*8 screw to lock the quick release plate onto
the main body as shown in the below picture, ghten
the screws with the Allen key.
Step 6:
Loosen the screws on the right side of the HDMI plug
protector, insert the micro HDMI plug to the camera
through the holder of the HDMI plug protector. Then fix
the HDMI plug to the HDMI plug protector, ghten the
srews.
Step 7:
Insert two 15mm rods into the base plate, fix the rods at
a proper posion by ghten the screws on both sides of
the base plate.
Step 8:
Loosen the locking screw on the base plate, put the
quick release plate onto the base plate, lock the quick
release plate by ghng the locking screw on the base
plate, make sure the screw is securely fastened.
Now the basic installaon is completed, it is ready for
shoong. You can add other accessories to this kit
according to your requirement. You can hold the wood
grip or top hand grip while shoong, or you can mount
on tripod. Aer shoong, remember to remove the
camera from the cage.
换图
换图
换图
换图
换图 换图
换图 换图
换图