Sferalabs Iono Pi with Raspberry Pi 3 Model B IPMB20R User manual

!
Iono
Safety Instructions
Quick Reference Guide
August 2022, Revision 031
Iono Pi IPMB20R IPMB20RP IPMB20R41 IPMB20R42 IPMB20R44 IPMB20R48
Iono Pi Max ICMX10XS ICMX10XPL ICMX10XP1 ICMX10XP2 ICMX10XP3
Iono RP IRMB10X IRMB10R IRMB10S
Iono RP D16 IRMD10X IRMD10R IRMD10S
Be sure to always remove the power supply before inserting or removing the
Raspberry Pi from the Iono.!
In order to meet the relevant CE requirements, Iono must be operated fully
enclosed in a DIN-rail cabinet.!
Follow all applicable electrical safety standards, guidelines, specifications
and regulations for installation, wiring and operations of Iono.
Carefully and fully read the Iono user guide before installation:
https://www.sferalabs.cc/iono/
Iono is not authorised for use in safety-critical applications where a failure of the product
would reasonably be expected to cause personal injury or death. Safety-critical
applications include, without limitation, life support devices and systems, equipment or
systems for the operation of nuclear facilities and weapons systems. Iono is neither
designed nor intended for use in critical military or aerospace applications or environments
and for automotive applications or environment. Customer acknowledges and agrees that
any such use of Iono is solely at Customer's risk, and that Customer is solely responsible
for compliance with all legal and regulatory requirements in connection with such use.
Sfera Labs S.r.l. may make changes to specifications and product descriptions at any time,
without notice. The product information on the website or materials is subject to change
without notice.
Iono and Sfera Labs are trademarks of Sfera Labs S.r.l. Other brands and names may be
claimed as the property of others.
Copyright © 2022 Sfera Labs S.r.l. All rights reserved.
Page of1 8

Safety information
Carefully and fully read the user guide before installation and retain it for future reference.
Qualified personnel
The product described in this manual must be operated only by personnel qualified for the
specific task and installation environment, in accordance with all relevant documentation
and safety instructions. A qualified person should be capable of fully identifying all
installation and operation risks and avoid potential hazards when working with this product.
Hazard levels
This manual contains information you must observe to ensure your personal safety and
prevent damage to property. Safety information in this manual are highlighted by the safety
symbols below, graded according to the degree of danger.
Indicates a hazardous situation which, if not avoided, will result in death or serious
personal injury.
Indicates a hazardous situation which, if not avoided, may result in death or serious
personal injury.
Indicates a hazardous situation which, if not avoided, can result in minor or moderate
personal injury.
Indicates a situation which, if not avoided, can result in damage of property.
DANGER
WARNING
CAUTION
NOTICE
Page of2 8

Safety instructions
General safety instructions
Protect the unit against moisture, dirt and any kind of damage during transport, storage
and operation. Do not operate the unit outside the specified technical data.
Never open the housing. If not otherwise specified, install in closed housing (e.g.
distribution cabinet). Earth the unit at the terminals provided, if existing, for this purpose.
Do not obstruct cooling of the unit. Keep out of the reach of children.
Life threatening voltages are present within and around an open control cabinet.
When installing this product in a control cabinet or any other areas where dangerous
voltages are present, always switch off the power supply to the cabinet or equipment.
Risk of fire if not installed and operated properly.
Follow all applicable electrical safety standards, guidelines, specifications and regulations
for installation, wiring and operations of this product.
The internal components could generate a substantial amount of heat. Ensure that the
product is properly installed and ventilated to prevent overheat.
When present, an internal fan significantly improves the airflow and heat dissipation.
Depending on external environment conditions, the fan could collect a significant amount
of dust or other impurities, that could prevent it from spinning or could reduce its
effectiveness. Periodically check that the fan is not blocked or partly obstructed.
The connection of expansion devices to this product may damage the product and other
connected systems, and may violate safety rules and regulations regarding radio
interference and electromagnetic compatibility.
Use only appropriate tools when installing this product. Using excessive force with tools
may damage the product, alter its characteristics or degrade its safety.
WARNING
WARNING
NOTICE
Page of3 8

Battery
This product may include a small lithium non-rechargeable battery to power its internal real
time clock (RTC). Some models also optionally uses an external rechargeable lead-acid
battery for the uninterruptible power supply.
Improper handling of lithium batteries can result in an explosion of the batteries and/or
release of harmful substances.
Worn-out or defective batteries can compromise the function of this product.
Replace the RTC lithium battery before it is completely discharged. The lithium battery
must be replaced only with an identical battery. See the "Replacing the RTC backup
battery" section for instructions.
Do not throw lithium batteries into fire, do not solder on the cell body, do not recharge, do
not open, do not short-circuit, do not reverse polarity, do not heat above 100°C and protect
from direct sunlight, moisture and condensation.
Only use a lead-acid battery with electrical ratings recommended in the technical
specifications for this product.
Follow the battery manufacturer's instructions when installing the external UPS battery (not
provided).
Dispose of used batteries according to local regulations and the battery manufacturer's
instructions.
WARNING
Page of4 8

Warranty
Sfera Labs S.r.l. warrants that its products will conform to the specifications. This limited
warranty lasts for one (1) year from the date of the sale. Sfera Labs S.r.l. shall not be liable
for any defects that are caused by neglect, misuse or mistreatment by Customer, including
improper installation or testing, or for any products that have been altered or modified in
any way by Customer. Moreover, Sfera Labs S.r.l. shall not be liable for any defects that
result from Customer’s design, specifications or instructions for such products. Testing and
other quality control techniques are used to the extent that Sfera Labs S.r.l. deems
necessary.
Warranty will not apply in the event of:
• installation, maintenance and use contrary to the instructions and warnings provided by
Sfera Labs S.r.l.!or in conflict with legal regulations or technical specifications;
• damages occurred due to: defects and/or abnormalities of the electrical wirings, defects
or abnormal distribution, failure or fluctuation of electrical power, abnormal
environmental conditions (such as dust or smoke, including cigarette smoke) and
damages related to air conditioning systems or humidity control systems;
• tampering;
• damage due to natural events or force majeure or not related to the original defects,
such as damage due to fire, flood, war, vandalism and similar events;
• damage caused by use of the product outside of the limitations set in the technical
specifications;
• removal, modification of the serial number of the products or any other action which
prevents its unique identification;
• damage caused during transportations and shipment.
The complete Terms and Conditions document applicable to this product is available here:
https://www.sferalabs.cc/terms-and-conditions/
Page of5 8

Disposal
Waste Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with
separate collection systems). This marking on the product, accessories or
literature indicates that the product should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal,
separate these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take these items for
environmentally safe recycling. This product and its electronic accessories should not be
mixed with other commercial wastes for disposal.
Iono may include a small non rechargeable manganese dioxide lithium coin battery. This
battery is not accessible from the outside. You should first remove the case body to gain
access to the Iono circuit boards. Always remove the battery before disposing of this
product.
Installation and use restrictions
Standards and regulations
The design and the setting up of electrical systems must be performed according to the
relevant standards, guidelines, specifications and regulations of the relevant country. The
installation, configuration and programming of the devices must be carried out by trained
personnel.
The installation and wiring of connected devices must be performed according to the
recommendations of the manufacturers (reported on the specific data sheet of the product)
and according to the applicable standards.
All the relevant safety regulations, e.g. accident prevention regulations, law on technical
work equipment, must also be observed.
Safety instructions
Carefully read the safety information section at the beginning of this document.
Set-up
For the first installation of the device proceed according to the following procedure:
✓make sure all power supplies are disconnected
✓install and wire the device according to the schematic diagrams on the specific product
user guide
✓after completing the previous steps, switch on the power supply and other related
circuits.
Page of6 8

Conformity Information
EU
The declaration of conformity is available on the internet at the following address:
https://www.sferalabs.cc/iono/
USA
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Shielded cables must be used with this equipment to maintain compliance with FCC
regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
CANADA
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
RCM AUSTRALIA / NEW ZEALAND
This product meets the requirements of the standard EN 61000-6-3 - Emission for
residential, commercial and light-industrial environments. See the product's User Guide for
additional information.
Page of7 8

Compliance information for Raspberry Pi Model B
IPMB20R contains a standard Raspberry Pi 3 Model B single board computer. IPMB20RP
contains a standard Raspberry Pi 3 Model B+ single board computer. IPMB20R41,
IPMB20R42, IPMB20R44, IPMB20R48 contain a standard Raspberry Pi 4 Model B single
board computer. These boards have WiFi and Bluetooth radios. They are user accessible
and replaceable.
EU
Raspberry Pi 3 Model B, Raspberry Pi 3 Model B+ and Raspberry Pi 4 Model B are in
conformity with the essential requirements and other relevant requirements of the Radio
Equipment Directive 2014/53/EU.
USA
Raspberry Pi 3 Model B FCC IDENTIFIER: 2ABCB-RPI32
Raspberry Pi 3 Model B+ FCC IDENTIFIER: 2ABCB-RPI3BP
Raspberry Pi 4 Model B FCC IDENTIFIER: 2ABCB-RPI4B
The antenna(s) used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be colocated or operating in conjunction
with any other antenna or transmitter, except in accordance with FCC multitransmitter
product guidelines. This (WiFi DTS) device has 20 MHz bandwidth mode.
CANADA
Raspberry Pi 3 Model B IC CERTIFICATION No.: 20953-RPI32
Raspberry Pi 3 Model B+ IC CERTIFICATION No.: 20953-RPI3BP
Raspberry Pi 4 Model B IC CERTIFICATION No.: 20953-RPI4B
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Page of8 8