Sim-Lab GT1-EVO User manual

GT1-EVO
VERSION 2.0
Last updated: 17-12-2021
INSTRUCTION MANUAL

2|2 23
Breaking tabs:
Sometimes tabs from corner brackets need to be broken off in
order to fit as instructed. Place a flathead screwdriver behind
the tab and tilt upwards.
Always make sure to point away from you while doing so.
To know when to do this, we will show the following
symbol next to the brackets.
Inserting Slot-Nuts:
You got excited, finished the build, put the caps on, but forgot to install
one element. Do not worry. It happens to everyone. In this diagram, you
can see how to insert a Slot-Nut directly into the slot from the side.
You can also use one of your smaller Hex wrenches to help wiggle
the Slot-Nut in place.
Tools needed:
Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions on
assembly. This requires only a set of simple tools and some of your time. Please check the bill of materials before
starting (page 22) and make sure all the parts are delivered.
Note:
Depending on your date of purchase, you may or may not have received a large bag of additional washers. If this
is the case, use one on every M8 bolt to install brackets. This was a temporary solution and will be phased out as
soon as possible and therefore is omitted from this instruction manual.
BEFORE YOU START:
5/6MM -

3|3 23
BUILD 2X
1350MM
1X
Slot-Nut M8
4X
A26
P1

4|4 23
BUILD 2X
500MM
1X
Slot-Nut M8
4X
P3
A26

5|5 23
500MM
or
20”
Corner
Bracket
8X
M8 X 16
16X
A12
A17

6|6 23
120MM
or
5”
Corner Bracket
Cap
8X
Profile 80x40
End-Cap
4X
Rubber
Feet
M6 X 20
(A19)
4X4X 4X
Slot-Nut M6
(A27)
A14
A13
A19
A11
A27

7|7 23
BUILD 2X
Corner
Bracket*
2X
M8 X 16
2X
Slot-Nut M8
2X
500MM
1X
A26
A12
A17
P6

8|8 23
Corner Bracket
Cap
4X
Profile 40X40
End-Cap
4X
M8 X 16
4X
Slot-Nut M8
4X
A17
A15
A13
A26

9|9 23
BUILD 2X
M8 X 16
2X
Slot-Nut M8
2X
580MM
1X
Corner
Bracket
2X
A26
A17
A12
P2

10 |10 23
430
430MM
or
17”
M8 X 16
4X
Slot-Nut M8
4X
A26
A17

11 |11 23
Corner Bracket
Cap
4X
Profile 80X40
End-Cap
2X
M8 X 16
2X
Slot-Nut M8
8X
Corner
Bracket
2X
A13
A26
A14
A12
A17

12 |12 23
500MM
1X
Slot-Nut M8
4X
P3
A26

13 |13 23
M8 X 16
2X
Corner Bracket
Cap
2X
A17
A13

14 |14 23
M8 X 16
4X
Corner Bracket
Cap
2X
Corner
Bracket*
2X
A12 A17 A13

15 |15 23
Lock-Nut M8
4X
M8 X 20
4X
Washer M8
8X
M8 X 20
4X
Wheel Deck
Pivot Plate
Right (A10)
1X
Wheel Deck
Pivot Plate
Left (A9)
1X
Wheel Deck
1X
A22
A23
A16
A8
A9
A10

16 |16 23
M8 X 16
4X
Washer M8
4X
Slot-Nut M8
4X
A22
A26
A17

17 |17 23
BUILD 2X
Profile 80X40
End-Cap
1X
M8 X 16
1X
Slot-Nut M8
1X
200MM
1X
Corner
Bracket
1X
A17
A12
A26
A14
P5

18 |18 23
M8 X 16
2X
Slot-Nut M8
4X
Corner Bracket
Cap
2X
A26
A17
A13

19 |19 23
M8 X 16
4X
Washer M8
4X
Pedal Deck
1X
A17
A22
A7

20 |20 23
Profile 80X40
End-Cap
1X
M8 X 16
2X
Slot-Nut M8
2X
400MM
1X
Corner
Bracket
2X
A17 A12
A26
P4
A14