Simply Shade AG35-3037R-LS-6 User manual

1
welcoming • sophisticated • inspiring
PLEASE RETAIN YOUR RECEIPT. WARRANTY CLAIMS
WILL NOT BE RECOGNIZED WITHOUT A DATED RECEIPT.
Purchase Date
MODEL #AG35-3037R-LS-6
10x12FT CANTILEVER UMBRELLA
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 1-844-230-9904 , 8 a.m. – 8 p.m., EST, Monday - Friday, or visit
www.myshadesource.com for more information.
ITEM #0774211

PART DESCRIPTION QUANTITY
A Umbrella 1
B1
C
Rotating Hub
Thank you for purchasing the SimplyShade 10x12-ft Cantilever Umbrella.
1
HH Inverted Base Stem 1
II Tube
Plastic Base
1
PACKAGE CONTENTS
2
A
B
CJJ
AA
LL
KK
FF
GG DD
HH
II
BB
CC
EE
NOTE: There are total two cartons.
Umbrella and plastic base are packed in separate carton.

3
HARDWARE CONTENTS (not shown to actual size)
SAFETY INFORMATION
AA BB
DD EE FF GG
CC
Large Wrench (x 1) Small Wrench (x 1)
Allen Wrench (x 1) Screw (x 4) Bolts (x 4) Washer (x 4)
Crank Handle (x 1)
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
Assemble on a soft, non-abrasive surface, such as a carpet, to avoid damage to the item. Item is heavy.
Use care when handling. May require two adults for safe assembly. Crank the umbrella to its closed
position during windy weather conditions.
This outdoor umbrella is designed and made for personal non-commercial use. It should not be used as
a toy or a tool. Children under age of 16 should not be engaged in the assembly, removal or disassem-
bly. Children under age of 10 should be supervised by a competent adult while using this furniture.
CAUTION
To prevent personal injury or damage, always take down the umbrella when not in use, during windy
conditions or in rain.
PREPARATION
Before beginning the assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble, install or operate the product.
Estimated Assembly Time: 40 minutes
Tools Required for Assembly (included): Wrench
1. Hardware for Umbrella:
2. Hardware for Base:

4
ASSEMBLY INSTRUCTIONS
1
2
3
II
JJ
II
1. Remove the Inverted Base Stem (HH) from the
Tube (II). Then remove the Tube (II) by using the
Steel Wrench (JJ) turning counter-clockwise
direction .
Remove the base lid from the base shell.
2. Re-install the Tube (II) to base shell to prevent
sand getting into the threads. Fill the base with
at least 220 lbs of sand (not included), pouring
water into the base intermittently to help pack
the sand.
3. Remove the Tube (II) from the base shell.
HH
JJ
II
JJ Steel Wrench x 1
JJ Steel Wrench x 1

5
ASSEMBLY INSTRUCTIONS
4
5
6
JJ
II
4. Set the base lid back onto the base shell and re-
install the Tube (II) using the Steel Wrench (JJ)
and turning clockwise .
6. Insert the Rotating Hub (B) & Base Stem (HH)
B
EE
DD
HH
WARNING: DO NOT OVER TIGHTEN TUBE (II) OR
PARTS MAY BE DAMAGED.
AA
B
II
HH
FF
GG
Allen Wrench
Screws
JJ Steel Wrench x 1
EE
DD
x 4
x 1
into the Tube (II). Secure the Rotating Hub (B)
to the Tube (II) with 4pcs Bolts (FF) and 4pcs
Washers (GG). Tighten with Large Wrench (AA)
by clockwise .
AA Large Wrench x 1
FF Bolt x 4
GG Washer x 4
5. Remove the Rotating Hub (B) from the Umbrella (A)
pole using the Large Wrench (AA).
Line up the holes in the Rotating Hub (B) on top of
the Base Stem (HH). Secure the Rotating Hub (B)
to the Base Stem (HH) with 4pcs Screws (EE).
Tighten with Allen Wrench (DD).

6
ASSEMBLY INSTRUCTIONS
7
A
B
C
AA
8
9
7. Fit the Crank Handle (CC) over the crank
mechanism.
Secure the Crank Handle (CC) onto the crank
mechanism using the Small Wrench (BB) to
tighten the setscrew.
BB
BB
CC
Small Wrench
Crank Handle
BB
CC
x 1
x 1
AA
Large Wrench x 1
8. Line up the two holes in the bottom of the Umbrella (A)
pole with the Rotating Hub (B) and slide the Umbrella (A)
pole down over the Rotating Hub (B). Using the Large
Wrench (AA), secure the Umbrella (A) pole to the
Rotating Hub (B) with the 2pcs Bolts (KK) and 2pcs
Washers (LL).
9.
and
Release the
andle to lock into
place.
clockwise
Slowly turn the
Crank Handle (CC)
until the canopy is fully
opened.
a
Storage Tie
CC
Crank clockwise to open ,
Crank counter-clockwise to close .
CAUTION: DO NOT open the umbrella counter-clockwise
. It will not stay open and may close unexpectedly.
LL
KK

7
ASSEMBLY INSTRUCTIONS
10
11
10. With the canopy fully opened, grip the lever on the
vertical slide handle and raise or lower the canopy to
desired angle. Release the slide handle to lock into place.
To close the umbrella, turn the Crank Handle (CC)
counter-clockwise .
CAUTION: When cranking the umbrellaopen, if you feel
resistance and the canopy is not opening, do not force
the Crank Handle (CC). Gently spread the umbrella
ribs by handandshake the fabric, then continue to
crankopen.
11. To rotate the Umbrella (A) canopy horizontally,
place foot on the foot pedal of the Rotating Hub (B)
and hands on the Umbrella (A) pole. Depress the
pedal androtate the umbrellain eitherdirection to
reach desired position. Release foot pedal to lock
into place.
WARNING:Alwaysclose the Umbrella (A) and secure
the canopy to the Umbrella (A) pole with Storage Tie
when notin use andduring highwinds orrain. Failure
to do so may resultin personal injury and/ordamage.

CARE AND MAINTENANCE
Umbrella frames are warranted for a period of one (1) year.
Exceptions: Items used for commercial, contract or other non-residential purposes, display models,
items purchased as is, or items damaged due to acts of nature, vandalism, misuse or improper
assembly are not coverd. Discoloration or fading of the finish or fabrics as a result of exposure to the
elements, chemicals or spills are not covered. Tabletop glass breakage, corrosion or rusting of hard-
ware and damages to frames or welds caused by improper assembly, misuse or natural causes are
not covered.
Warranty to the original purchaser is non-transferable. All warranty claims require a dated sales
receipt. Any replacement of warranted items will be in the original style and color, or a similar style
and color if the original is unavailable or has been discontinued. We don't reimburse for transportation
or delivery costs, or compensate the individual or any outside party for assembling or disassembling
the product.
REPLACEMENT PARTS LIST
ONE- YEAR LIMITED WARRANTY
For replacement parts, call our customer service department at 1-844-230-9904 , 8 a.m. - 8 p.m.,
EST, Monday - Friday, or visit www.myshadesource.com for more information.
AA
BB
CC
DD
EE
FF
GG
KK
LL
DESCRIPTION PART#PART
AA #6
BB
Large Wrench
CC
Small Wrench
Crank Handle
Screw
Bolt
Washer
Bolt
Washer
#2.5
DD Allen Wrench
#35
EE
FF
GG
KK
LL
#5
A228
C-08-025
D10
. Before using, clean the product completely with a soft, dry towel.
. Wash with a mild solution of soap and water; rinse dry completely. Do not use strong detergent or
abrasive cleaners.
. Store the product in a cool, dry location away from sunlight.
. Store the umbrella out of bad weather or high winds.
TROUBLESHOOTING
POSSIBLE CAUSE
The canopy isnotopenedfully
CORRECTIVE ACTION
Make sure the canopy isfully opened
PROBLEM
The canopy surface isuneven
8
C-08-019
D13
x4
x4
x4
x2
x2