SIRUI DK28 User manual

DK28碳纤维气垫灯架
如图：
旋开锁紧旋钮，展开脚管至所需的角度，锁紧旋钮。
1. 打开扳扣。
2. 上下移动中柱。
3. 至所需高度后，锁紧扳扣。
图3.2
图1 图3.1图2
16mm接头
1/4"螺丝
中柱
脚管
脚垫
扳扣
锁紧旋钮
2. 灯架展开 3.1 灯架伸缩
3.2 灯架收缩缓冲
灯具 灯架
如图：
由于采用气压缓冲，重力越大气压越明显，
收缩中柱时请用较小力度下压。
DK28 3 32 25 22 860 2800 1.20 10
脚管管径
850
灯架参数表

As is shown:
Loosen the locking knob and open the
legs to your desired position. Tighten the
locking knob.
1. Open the flip locks.
2. Extend/Retract the column.
3. Close the flip locks when the stand is
set to your desired height.
Locking Knob
3.1 Column Extension & Retraction
3.2 Air Cushioning
DK28 Carbon Fiber
Air-Cushioned
Light Stand
INSTRUCTIONS
16mm Spigot
1/4"Screw
Center Column
Leg Tube
Rubber Foot
Flip Lock
Fig. 11. Name of Parts Fig. 2 Fig. 3.1
Fig. 3.2
2. Stand Deployment
Flip Locks
Rotatable Center Column
Convenient for beam angle
adjustment
Please remove your gear (the fixture, for example) from the stand when
transporting the stand from one place to another.
3 Sections
As is shown:
Air cushioning gently lowers the light
when making height adjustments to
protect equipment and fingers.
DK28
32/1.263 25/0.98
2800/110.24 850/33.46 1.2/2.65 10/22.05
Data Chart
Section Max Tube Dia
(mm/inch)
Min Tube Dia
(mm/inch)
22/0.87
Tube Dia
(mm/inch)
860/33.86
Min Height
(mm/inch)
Max Height
(mm/inch)
Folded Height
(mm/inch)
Weight
(kg/lb)
Max Load
(kg/lb)