Soundcast OutCast Jr. User manual

CONNECT
OutCast & OutCast Jr.
+
Connect Outcast or Outcast Jr. to
SONOS to add a “Roaming” Zone
Soundcast portable speakers make a great addition to any SONOS®music system. Simply add a
SONOS:CONNECT (ZP90) to your Soundcast OutCast or OutCast Jr. and the Soundcast UAT transmitter.
Now you can easily add a weather-resistant battery powered “portable” zone to your SONOS system.
Step1:
Using the RCA audio cable included in the UAT package,
connect “audio out” located on the rear panel of your
SONOS connect to “audio in” on the Soundcast UAT transmitter.
Minimum
3 Foot Distance
SONOS:CONNECT UAT

NOTE:
• Setting the SONOS:CONNECT (ZP90) zone’s audio
to ‘variable’ will maintain volume control from the
SONOS app and will also require volume control on the
Soundcast speaker(s).
• Setting the SONOS:CONNECT (ZP90) zone’s audio to
‘xed’ will deliver full volume from the SONOS and all
volume will be controlled by the Soundcast speaker(s).
• You may also operate up to two Soundcast speakers per
transmitter.
• Refer to the user’s manual of your SONOS system or
your Soundcast system for additional setup instructions
not mentioned in this guide.
Step2:
Ensure that your UAT is connected to an AC outlet and that your OutCast
speaker and UAT are set to the same channel.
Step3:
Open your SONOS app, look under
“Settings” and “Add a Player or Sub” to
connecto to the SONOS:CONNECT and your OutCast speaker will
be ready to play music outdoors.
©2016 Soundcast, LLC. [phone]
Connect Outcast or Outcast Jr. to SONOS to add a “Roaming” Zone