Steel City 20530 User manual

R
ManualPartNo. OR20530M
User Manual
Read and understand this manual before using machine.
17” VS DRILL PRESS
®
STEEL CITY TOOL WORKS
VER. 11.20.13
Model Number
20530

THANK YOU for purchasing your new Steel City Drill Press.
This drill press has been designed, tested, and inspected with you,
the customer, in mind. When properly assembled, used and main-
tained, your drill press will provide you with years of trouble free
service, which is why it is backed by one of the best machinery
warranties in the business.
This drill press is just one of many products in the Steel City’s
family of woodworking machinery and is proof of our commitment
to total customer satisfaction.
At Steel City we continue to strive for excellence each and every
day and value the opinion of you, our customer. For comments
about your drill press or Steel City Tool Works, please visit our web
site at www.steelcitytoolworks.com .
®

1
TABLE OF CONTENTS
INTRODUCTION
This user manual is intended for use by anyone working with this machine. It should be kept available
for immediate reference so that all operations can be performed with maximum efficiency and safety.
Do not attempt to perform maintenance or operate this machine until you have read and understand the
information contained in this manual.
The drawings, illustrations, photographs, and specifications in this user manual represent your machine
at time of print. However, changes may be made to your machine or this manual at any time with no
obligation to Steel City Tool Works.
INTRODUCTION
SECTION 1
SECTION 2
Product Specifications............................................................................................................................2
SECTION 3
Accessories and Attachments ................................................................................................................2
SECTION 4
Definition of Terms..................................................................................................................................3
SECTION 5
Feature Identification..............................................................................................................................4
SECTION 6
General Safety........................................................................................................................................5
SECTION 7
Product Safety........................................................................................................................................8
SECTION 9
Grounding Instructions..........................................................................................................................10SECTION 8
Electrical Requirements..........................................................................................................................9
SECTION 10
Unpacking & Inventory..........................................................................................................................11
SECTION 11
Assembly..............................................................................................................................................13
SECTION 12
Adjustments..........................................................................................................................................16
SECTION 13
Operations............................................................................................................................................20
Maintenance..........................................................................................................................................23
SECTION 14 Troubleshooting....................................................................................................................................24

HandleOperation360degreerotation
MotorcontrolIndustrialpushbutton
withOFFpaddle
Tablesize14"widex14"deep
Tabletilt 45 eftandright
TablemovementRackandpinion
TablematerialCastiron
DepthstoptypeExternalMicro-Adjust
withQuickSet
DepthYes
Columndiameter3-1/8"(80mm)
° l
SHIPPINGDIMENSIONS:
CartonType
Length
Depth
Height
GrossWeight
Thereareavariety of accessoriesavailableforyourSteelCityProduct.Formoreinformation on
anyaccessoriesassociatedwiththisandothermachines,pleasecontactyournearestSteelCity
distributor,orvisitourwebsiteat:www.steelcitytoolworks.com.
2
PRODUCTSPECIFICATIONS(cont)
MOTOR
noitcudnIepyT
Continuousduty HP 1-1/2 HP
13spmA
201stloV
elgniSesahP
06ztreH
)daolo-n(5271MPR
PRODUCTDIMENSIONS:
Height
Width
Depth
Weight
69"
14"
27"
218 lbs
Box
58"
26"
13"
240 lbs
PRODUCTSPECIFICATIONS
V-yloPepyttleB
petSepytyelluP
BeltTensioningMotorslide
Number of speeds VS
0052-005sdeepsllirD
Spindletaper#2 Morsetaper
3TJrepatkcuhC
Chuckcapacity5/8" (3-16 mm)
Chuck to tabledimension
Chuck to basedimension43"
Quilldiameter 2" (52 mm)
"6levartlliuQ
seYkcollliuQ
Maximum
"32mumixam

3
DEFINITION OF TERMS
Belt cover - Can be opened to provide access to belts,
pulleys, and speed chart.
On/Off switch - Access power to drill press or turn
power off.
Feed handles - Used to lower chuck and apply
pressure toward work piece.
Quill lock - Holds quill in predetermined position.
Keyed chuck - Key is used to loosen or tighten drilling
and sanding tools.
Table - Holds work piece.
Column - Used to support work table and drill press
head.
Base - Sits on floor, adds stability, and attaches to
column.
Depth scale - Keeps track of tool travel into work
piece.
Motor - Supplies power to drill press.
Flexible lamp - Provides light source for all operations.