STUDIOSPARES 401241 User manual

Studiospares 16U Equipment Rack - Assembly Instructions
Included items: -
Assembly: -
Step 1
Take the two outer frames and arrange the
placement so the outer face (larger holes) is
on the outside and then the inner face
(smaller holes) is on the inside of the
placement.
Step 2
Take one of the screws included with the support poles
and insert into the large outer face hole.
Step 3
Align the screw and support pole.

Step 4
Screw the screw into the support pole until firmly in
place.
Step 5
Repeat the process until all four support poles are attached as
seen in the photo.
Step 6
Remove any remaining screws from the support poles
before the next stage of attaching the second outer frame.
Step 7
Place/align the second outer frame with the already
attached support poles. Ensure the larger holes (outer
face) are on the outside, like in Step 1.

Step 8
Screw the screws into the support pole again
until firmly in place, like in Step 4.
Step 9
Once completed the Studiospares 16U Equipment
Rack should look like the following.