LED Area Light
Important: Read all instructions prior to installation. HPAL2 Series
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V1.0 12/21/2020
User Manual
Installation
Safety and Notes
Environmental Specications
Operating Temperature -22°–122° F (-30°–50° C)
IP Rating IP66
• Product should be installed and serviced by a certied electrician
in accordance with applicable national, state, and local building
and electrical codes.
• To reduce the risk of electric shock, ensure that the main power
source and circuit breakers are switched o before performing
any installation or wiring procedures.
• Avoid looking directly into lamp when illuminated.
• Ensure all mounts are securely attached and will support the
weight of the xture. Failure to properly support xture may
result in damage or injury, for which the manufacturer does not
assume responsibility.
Specications
HPAL2-50K450-90
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
1. Remove supply power prior to installation.
2. If using optional mounting method, remove included bracket
and attach optional one.
3. Securely mount light and connect wiring.
Note: In some cases, such as with slip-tter mount, the
wiring will need to be connected before mounting.
4. Restore supply power and on mounts that allow for it, adjust
angle as desired.
Optional Accessories
Wiring Diagram
HPAL-SM
Surface Mount Bracket Set
HPAL-SF-TMB
Slip-Fitter Mount with
Wall Mount Tenon Bracket
HPAL-FA
Fixed Square Pole Mount
HPAL-SF
Adjustable Slip-Fitter Mount
for Round Poles
HPAL-UB-IH
Alternate U-Bracket Mount
with Eye Bolt
HPAL-UB
Alternate U-Bracket Mount