Status Battery
4 LEDs On
3 LEDs On
2 LEDs On
1 LED On 10-25%
1 LED blinks 0-10%
75%-100%
50%-75%
25%-50%
Blue LED On
Blue LED blinks fast
Blue LED blinks slowly
Connection
Binding
Disconnection
Connect to Flight Controller
Use Connection Cable to connect
Flight Controller and the Sky Part
of ZYX-BD.
Sky Part
Attentions!
1Quick Start
2
Introduction of Ground Part
For Tarot ZYX-M Flight Control System.
ZYX-BD
Bluetooth Datalink
!
Power LED
Status LED
Status LED
USB Port Power Button
Antenna
Binding
Button
Binding
Button
Power LED
Status LED
3
Introduction of Sky Part
Initial Bind
Charging Turn On / Off
Press the binding button on Sky Part over 1s, and poke the binding button
inside the Ground Part.
Observe the Status LED on the Ground Part：
Blue LED blinks fast, binding；
Blue LED blinks slowly, bind finishes.
Connect the USB port and charger
with Mirco-USB cable.
Press the button for 1s and then
press it for over 3s.
1
Ground
Part
Ground
Part
3
Ground Part
Status
Blue LED On
Blue LED blinks fast
Blue LED blinks slowly
Connection
Binding
Disconnection
Status LED
Status
4-24-1
2
DATA / USB GIMBAL
PMU-5V
LED/OSD AUX1
Sky Part
