Telemetrics CAM-CMBKT User manual

TotalLoad-20lbs.
CP-ITVPan/TiltVideoCameraMountingAccessories CAM-CMBKT
Ref:14700162
Caution
Duetovariationofwalland
ceilingconstruction,hardware
formountingthebracketsisnot
provided.Exercisecarewhen
securingbracket.Installation
shouldbeverifiedforproper
fasteningandsafety.
2.50”
4.00”
3.00”
5.00”
.28”Dia
2Holes
.25”Dia
2Holes
3/03printedinU.S.A.
6LeightonPlace
Mahwah,NewJersey,U.S.A.07430
Phone:[phone]Fax:[phone]
www.telemetricsinc.com
Specificationsandfeaturessubjecttochangewithoutnotice.
TheCAM-CMBKTisalightdutyceilingmountingbracketintendedforusewiththepan/tiltcamerasintheTelemetricsCP-
ITVsystem.Itishasahollowbodytoallowconcealedcableroutingifdesired.Theadjustableheadallowsfor360degree
rotationaswellasvaryingtiltanglesforawiderangeofcamerapositions.
Camera
10.75”
MountingPlate
54252000
¼-20x½PH
¼-20x5/8FH
10.50”
MaterialList:
(1)MountingPlate54252000
(1)¼-20x5/8FHScrew
(2)¼-20x½PHScrew
InstallationInstructions:
1.Mountthebrackettotheceilingusingthetwo¼”holesandproperhardwareforthemountingsurface.
2.Ifroutingthecablesthroughthebracket,runtheunterminatedwiringthroughtheholeallowingenoughslack
forcameramovement.
3.Terminatethewireswiththerequiredconnectors.
4.Mounttheadapterplatetothebottomofthecamerausingthe¼-20flatheadscrewprovided.
5.Mountthecameraassemblytothebracketusingthetwo¼-20panheadscrewsprovided.

TotalLoad-7.5lbs.
CP-ITVPan/TiltVideoCameraMountingAccessories CAM-WMBKT
Caution
Duetovariationofwalland
ceilingconstruction,hardware
formountingthebracketsisnot
provided.Exercisecarewhen
securingbracket.Installation
shouldbeverifiedforproper
fasteningandsafety.
Camera
8.90"
4.50"
.15”Dia
2Holes
.21”Dia
2Holes
2.90”
1.45”
2.65"3.20"
3/03printedinU.S.A.
6LeightonPlace
Mahwah,NewJersey,U.S.A.07430
Phone:[phone]Fax:[phone]
www.telemetricsinc.com
Specificationsandfeaturessubjecttochangewithoutnotice.
InstallationInstructions:
1.Mountthebasetothewallusingtheproperfastenersforthemountingsurface.
2.Hookthewallmounttothebaseandattachwiththe#8selftappingscrewprovided.
3.Ifroutingthecablesthroughthebracket,runtheunterminatedwiringthroughtheholeallowingenoughslack
forcameramovement.
4.Terminatethewireswiththerequiredconnectors.
5.Installthebottomcoverbyhookingthecurvedendintothebaseandsecuringwiththe#6screwprovided.
6.Mountthecameraandlockinthedesiredpositionusingthelockingknobs.
Base
Bracket LockingKnobs
BottomCover
TheCAM-WMBKTisalightdutywallmountingbracketintendedforusewiththepan/tiltcamerasintheTelemetricsCP-ITV
system.Itisconstructedoflightgray,highimpactplasticandhasahollowbodytoallowconcealedcablerouting.The
adjustableheadhasseparatelockingknobsforhorizontalandverticalmovementallowingawiderangeofcamera
angles.