Terra ID001 User manual

DIN rail holder for accessories of modular reception system
Figure 2. Mounting positions of the DIN rail holder on the base plate BD001
Vers. 1.01
Product description
DIN rail holder ID001 is intended for mounting on the base plate BD001.
Safety instructions
Read and follow safety instructions of each modules, which are mounted on the base plate BD001.
EN
Figure 1. External view of DIN rail holder ID001
1. The DIN rail holder can be mounted on the left
side in the rst position
2. The DIN rail holder can be mounted below
on the base plate
M3x6
2 pcs.
included in
a package.
This product complies with the relevant clauses of the European Directive 2002/96/EC. The unit must be recycled or discarded according
to applicable local and national regulations.
Equipment intended for indoor usage only.
This product is in accordance to following norms of EU: safety norm EN IEC62368-1, RoHS norm EN50581.

Figure 3. Mounting of the ethernet switch NeTGear GS308 on ID001
Figure 3.1 Lift the xing arm
Figure 3.3 Insert DC adapter and place GS308
Figure 4.1 SRM522 can be mounted on the left side of ID001
Figure 3.2 Set the xing screws
Figure 3.4 Pull down and x the xing arm
Figure 4.2 SRM522 can be mounted on the right side of ID001
Figure 4. Mounting of the SRM522 series dSCR multiswitch
3.6 mm
M4x8
2 pcs.
included in
a package.
M4x12
2 pcs.
included in
a package.
M3x8
2 pcs.
included in
a package.
DC adapter
included in
a package.
Draugystes str. 22, LT-51256 Kaunas, Lithuania, tel.: +370 37 - 31 34 44, fax: +370 37 - 31 35 55
E-mail: [email protected], http://www.terraelectronics.com