THOMSON QY-K600 User manual
Dear valued user:Welcome to join the big family of Urain! Thank you very much for
purchasing our products.
In order to use this player efficiently, please read this Manual carefully to master the
connection method and key operation instructions of this system before use. We have
made some explorations in design, manufacturing process, humanized operation, etc.
to meet your demands.
Please keep this Manual properly for future reference.
Please unpack, carefully check the following accessories and put them together to
avoid missing.
speaker X 1 User's Manua X 1 Type-Ccharge cable X 1
Wireless microphone X 2 Remote controller X 1
Contents1. Preface 2. Accessories3. Product introduction4 Precautions5. Panel introduction6. Operation instructions7. Equipment compatibility8. Main technical parameters9. Simple troubleshooting solutions10. Charge instructions0101010102030304040501
1. Preface
1.Advanced Bluetooth function, enabling pairing and connecting to any devices with
Bluetooth function (applicable to products with Bluetooth function).
2.Designed with large-capacity batteries, easy to carry and use and longer duration.
3.Support high-quality MP3 music files. 4.Support Karaoke function.
5.High-power horn and 3D digital audio technology contributing to remarkable tone
quality.
6.Compatible with external audio devices, such as IPAD, IPOD, mobile phone, comput-
er, MP3 and MP4.
3. Product introduction
First of all, thank you for using our digital audio products! Please read this Manual
before use this product to ensure correct operation. To provide better serve, the
contents of this Manual are subject to change due to changes in product performance
and functions without prior notice. Please do not use this product in places that are too
cold, too hot, too dusty or too humid and avoid the following situations to ensure better
performance:
1、Wet or underwater environment
2、Heater or high temperature working environment
3、Direct exposure to sunshine 4、Easy to fall off
5、Do not disassemble the audio system, otherwise the warranty will be void.
WARNING 1. Please pay attention to keep avoid from water and avoid water drop,
splashing, etc. Do not place containers with water, such as a vase on the top of the
equipment to prevent accidents. 2. In order to avoid fire, electric shock and other
accidents, please check whether the charging voltage is completely consistent with the
specified requirements.
4. Notes
2. List of Accessories
02 03
5. Panel introduction
Remote-control unit
6. Operation instructions
Introduction to buttons and hole sites: A total of 8 buttons and hole sites which are
defined as follows:
Note: Press button 13 "Volume mode switch" to switch among three modes, i.e.
tE/bA/UO. It can be used in conjunction with “Volume +/-” key to adjust the volume
size. It is defaulted as UO.
Turn on the microphone switch in any mode to activate the Karaoke function.
Karaoke function
This machine theoretically supports all mobile phones with Bluetooth function and any
related devices to connect Bluetooth and play music.
7. Equipment compatibility
1. /M: Long press to start up/shut down; short press to switch mode;
2. : Short press to play or suspend music.
3. : Long press to reduce the volume; short press to shift to the previous song.
4. : Long press to increase the volume; short press to shift to the next song.
5. OUT: Audio output 6. U6. USB: USB play
7. DC IN: Type C 5V/2A charging 8. AUX: Audio input (built-in reset button)
1. Power off
2. Microphone volume +
3. Volume +
4. Previous song
5. Bluetooth disconnected
/loopback connection
6. Microphone reverberation +
7. Mute
8. Microphone volume -
9. Play / suspend
10. Next song
11. Volume-
12. Sound
13. Menu
/ Volume mode switch
14. Microphone reverberation -
15. Reset
16. Mode switch
1.Short press /M key to switch to Bluetooth mode, which will enter the default
Bluetooth mode and wait for pairing.
2.Turn on the Bluetooth function on the device, and the device will start searching the
Bluetooth device.
3.Select "K600" from the list of found devices.
4.Enter the password "0000" as requested and press OK.
5.After successful pairing with the device, the indicator light will be constantly on.
Note: Bluetooth playback is controlled by the buttons on your device and
the remote control.
Bluetooth mode
After start up, use a 3.5mm audio cable to connect other audio devices to the "OUT"
jack of the speaker, and then short press the speaker " /M " button or the "MODE"
button on the remote-control unit to switch to the audio output mode. At this time, the
sound is played from the speaker as an audio source.
Coaxial output mode
Audio input mode
After start up, use a 3.5mm audio cable to connect external audio sources to the "AUX"
jack of the speaker, and then short press the speaker “ /M" button or the "MODE"
button on the remote-control unit to switch to the audio input mode.After that, you can
play music from an external audio source such as MP3/CD (please adjust the volume
of the external audio source to moderate and play).
123456781.In any play state, insert the U disk stored with MP3 songs into the USB interface. The
speaker will automatically identify and skip to the U disk play mode. The songs will be
played in copy order.
2.Short press “ " button to play and suspend music.
3.Short press to switch to the next song; long press to increase the volume.
4.Short press to switch to the previous song; long press to decrease the volume.
U disk play mode
Manufacturer: Shenzhen Qiuyu Electronic Co., Ltd.
Address: 3F,E Building, Hongzhuyongqi Industrial Park, Lezhujiao village, xixiang town,
Bao'an District, Shenzhen
After-sale service hotline: 0755-86323159
Website: http://www.u-rain.com/
V1.0
Product
Output power
Speaker frequency
Bluetooth version
Bluetooth range
Bare machine weight
Dimensions
QY-K600
15W*2
45Hz-20KHz
5.0, A2DP, AVRCP
Within 10 meters
About 830g
speaker: 250*105*63mm
8. Main technical parameters
10. Charging instructions
Low volume or distortion
Bluetooth indicator light is not on
Music discontinuity
Pairing failure
Solutions
9. Simple troubleshooting solutions
When the speaker prompts low battery, please charge it in time. It can be connected to
the 5V/2A charging device with the attached charging cable, and it can be fully charged
in about 4 hours.When the LED light of the speaker flashes, it means that it is charging.
After it is fully charged, the LED light will be always on, indicating battery is charged.
1. Check the audio volume and adjust it
to the right size
2. Battery low , need to be charged
1.Battery low. Please charge and try again.
2.Restart
1. There is an obstacle between the mobile
device and the Bluetooth device. Please
remove the obstacle.
2. Beyond the effective connection distance.
1.Check if the phone is in the pairing state.
2.The speaker has been successfully paired with
other equipment. Please disconnect the pairing
with other equipment first.
3.Delete the original device name on your
phone and re-pair.
Trouble
04 05
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be
usedinportableexposureconditionwithoutrestriction.
FCC Warning:
Other THOMSON Turntable manuals
