timkid CLEXO User manual

www.timkid.de
ASSEMBLY INSTRUCTIONS CLEXO
timkid GmbH | Mühlendeich 15 | 19303 Dömitz | 03875836933 | [e-mail]

ALL PARTS FOR THE ASSEMBLY OF CLEXO
1x table support
2x footrest
A 2x bolts for fastening
the table top
B 1x sleeve nut
C 1x for support to the
table top 6x10 mm
D 1x for fastening the
table support 6x25 mm
E 2x for fastening the
seat plate 6x60 mm
F 2x grub screw fixation
Screw the two boltsAinto the table top.
A
Insert thetable topwith the bolts into
the holes until it rests firmly.
ASSEMBLY INSTRUCTIONS
G 2x for footrest 6x15 mm
Insertion of the back leg.
Fixation with cross bolt nut
(is already present inthe leg)
IMPORTANT! The nut must point
inwards, the slot must bevertical.
F
C
Use the screws G to screw the footrests
E tothe requiredheight.
Do the same with the front leg.
Tighten the seat plate with the screws E.
G
DONE!
Screw ingrubscrews F
Insert sleeve nut B fromthe inside.
Connect screw D with table support
and sleeve nut B.
Fasten screw Cwiththe table support
into the table top.
D
B