TINY LAND TLTGPT001 User manual

Climbing Playset
2.5x63cm 2.5x50cm
6x25mm 6x48mm 4x28mm
WARNING:
Not for children under 2 years. Adult assembly only.
Using align key is required when assembling.
There may be small parts and sharp objects
while assembling.
Before using this product, please read the
instruction carefully and keep it safe for future
reference. Failure to follow the instruction
may result in damage to the product and put your
baby at risk.
X2
X2
X13 X9
X6 X6 X16
X54
Assembly Instruction
5B5A

Place all the blocks randomly on the ‘7’ board
and screw each one using two ‘d’ screws.
Place and fasten two ‘13’ pillars on both sides
of the ladder. Screw and tighten 5 ‘c’ screws
on each side.
Once everything is fastened tightly, place the
climbing board on a flat place.
01 02 03
04 05 06
07 08
09 10 11
Place and fasten the provided poles on the
arch with 9 ‘c’ screws.
Repeat the same step for the other side of
the arch.
Place and tighten 7 ‘c’ screws on each side
of the ladder.
Repeat the same step for the other side of
the ladder.
Place and fasten the climbing board between
the ladder and the arch to complete assembly. Fold it as shown when not in use.
Take it off
Fold it inward
Insert the protruding part into the groove.
Place 3 ‘b’ screws on each inner side and tighten the cat lock with the ‘a’ plastic plugs and repeat
the same step to complete the ladder.
Place and tighten two ‘6’ screws on both sides
of the ladder.
X2
X6 X6
X10
X7
X14
X6
X12
X9
X9
X9
X2
X16
~
5A 5B
11
10
10
4