tropitone Slat KD User manual

1
4
MORE INFORMATION
For care and cleaning instructions, refer to the Tropitone® Care,
Maintenance, Safety & Warranty Information guide included with your
furniture and available at www.tropitone.com/warranty.
Additional care information, “How To” videos and assembly
instructions for Tropitone Outdoor Furniture and Basta Sole shade
products are also available at our website.
If you have difficulty understanding any of the instructions and need
assistance while assembling your Crestwood KDTables, please call
Tropitone’s Customer Service Center at 949-951-2010.
Slat KD Tables
Assembly Instructions
Congratulations on the purchase of your Tropitone® Slat KD
Table. Read through all steps before fastening components
together.
CAUTION: Do not try to lift or flip furniture components
with only one person. Components may be heavy and
awkward to handle, and may result in injury to persons or
damage to property if not lifted properly. Once the Table
Top has been installed, use 2 persons to turn the
assembled table over to an upright position.
Tools Required
Safety Glasses
¼” Hex Key
Parts List
(1) Table Base
(1) Table Top
Tropitone Furniture Co.,Inc.
5 Marconi, Irvine, CA 92618
9499512010 phone
www.tropitone.com
Part # R9T00066
(4 or 6) 5/16”-18X1” Socket Head Cap screw
(4 or 6) 5/16”LockWashers
Revised:11.07.2023
2023 Tropitone Furniture Co., Inc.
✓ Check that all items listed in the Parts List are in your carton.
Assembledfurniture
is heavy. Assemble
at place of use.

2
3
Prepare a smooth, non-scratchwork surface(shipping carton, a
tarp or pool towels can be used).
Place Table Top upside down on the prepared work
surface. Threaded inserts should be facing upwards.
Place the four legs of the base onto the four threaded inserts of
the Table Top
Loosely attach each leg with one bolt and one washer. Do not
fully tighten until all four legs are attached.
Fully tighten all bolts.
Check 4 bolts to ensure that all arefully tightened.