TV Star LED24F+ User manual

LED TV SET
TV STAR LED24F+
USER’S MANUAL
ENG

1
Contents
Introduction.......................................................................................................................................2
Warning.............................................................................................................................................3
Caution..............................................................................................................................................4
Main unit description ........................................................................................................................6
Remote control..................................................................................................................................7
OSD basic adjustment.......................................................................................................................8
1 DVB-T & C Tuning .....................................................................................................................14
2 DTV Features...............................................................................................................................14
USB Features ..................................................................................................................................16
PVR Operation ( Optional ) ............................................................................................................17
CI Operation .................................................................................................................................18
Specifications..................................................................................................................................19
Trouble Shooting.............................................................................................................................20

2
Introduction
Thank you very much for your purchase of our product of LED TV. It serves as a
normal colour TV and PC monitor. To enjoy your TV to the full from the very
beginning, read this manual carefully and keep it handy for ready reference.
INSTALLATION
Locate the TV in a room where direct light does not strike the screen. Total darkness
or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
Allow enough space between the receiver and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or
premature component failure.
This TV can be connected to AC100-240V 50/60HZ.
Do not install the TV in a location near heat sources such as radiator, air ducts, direct
sunlight, or in a place somewhere like close compartment and close area. Do not cover
the ventilation openings when using the TV.
The indicator light will last about 30 seconds to go out after cutting off the electricity,
during this period, you cannot repower it on until the indicator light goes out, thanks a
lot for your attention!

3
Warning
This symbol is intended to alert the user to avoid the risk
of electric shock, do not disassemble this equipment by
anyone
except a qualified service personnel.
This symbol is intended to alert the user to the presence
of important operation and maintenance instructions in
the literature accompanying the equipment.
CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER- SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

4
Caution
Caution
High voltages are used in the operation of this product.
- Do not open the product's casing. Refer servicing
to qualified service personnel .
Caution
To prevent fire or electrical shock hazard, Do not expose
the main unit to moisture.
Caution
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Caution
Avoid exposing the main unit to direct sunlight and other
sources of heat. Do not stand the television receiver
directly on other products which give off heat. E. g. video
cassette players, Audio amplifiers. Do not block the
ventilation holes in the back cover. Ventilation is essential
to prevent failure of electrical component. Do not squash
power supply cord under the main unit or other heavy objects.

5
Caution
Never stand on, lean on, push suddenly the product
or its stand. You should Pay special attention to
children.
Caution
Do not place the main unit on an unstable cart stand,
shelf or table. Serious injury to an individual, and
damage to the television, may result if it should fall.
Caution
When the product is not used for an extended period
of time, it is advisable to disconnect the AC power
cord from the AC outlet.
Caution
The LED panel used in this product is made of glass.
Therefore, it can break when the product is dropped
or applied with impact. Be careful not to be injured
by broken glass pieces in case the LED panel breaks.

6
Main unit description
Control Panel Button Function
TV Terminal Connections
1. USB input terminal.
2. HDMI input terminal.
3. VGA input terminal.
4. PC AUDIO input terminal.
5. SCART input terminal.
6. HEADPHONE output terminal.
7. Component input terminal .
8. Video input terminal.
9. AUDIO input terminal.
10 TV antenna
11 CI slot
Power Input Configuration
AC POWER
Optional Configuration as below:
Connect the USB to the USB jack on the set.
NOTE
●It is only 500 mA MAX of DC current output when you
connect with USB jack
●To ensure the Mobile HD works well, you should use other power supply for the Mobile
HD. And do not use the USB jack in the same time.
●It supports Mobile HD by connecting with USB jack (must more than 2 GB). The
partitions of the Mobile HD can’t be more than 4 partitions. The max partition is 2TB. It
supports FAT/FAT32 document. The max FAT document is 4GB and the max FAT32
document is 2TB.
VOL+ : Volume up.
VOL- : Volume down.
CH+: TV channel up.
CH- : TV channel down.
MENU : Press to select the main menu.
TV/AV : Select the input signal.
POWER : Turn the TV on or off.

7
Remote control
: Turn the TV on or off.
:Press this button to mute or restore sound.
NICAM/A2: press this key to select the stereo mode.
ASPECT: Press to adjust picture ratio.
PMODE: Select picture mode.
SMODE: Select sound mode.
0-9: Select and switch to a channel using 0 - 9.
-/--: Switch the program digit.
• :Switch back and front between the current and previous
channels. Repeat the program in MEDIA
DISPLAY: Display TV information.
FREEZE: Press to hold the picture.
:Start to record.
( The U disk will be formatted when in burning , please do
not store important files in the U disk )
AUTO: Adjust the picture automatically in pc mode.
RED, GREEN, YELLOW, BLUE: Correspond to the
different colored subjects.
SLEEP: Set the sleep timer.
SOURCE: Press to change signal source.
ENTER: Enter the selected option or execute the selected
operation.
MENU: Press this button to enter the main menu for various
optional adjustable setting.
EXIT: Exit the OSD (On-screen display).
CH▲/CH▼: Change the channel up and down.
SUBTITLE: Open or close subtitle.
T.SHIFT: Press the button to pause current DTV program
and start record background
(Used for European region only)
VOL▲/VOL▼:Adjust the volume.
HOLD: Freeze a multi-page passage on screen in Teletext mode. (Used for European region
TV mode only
Press to start playing MEDIA, or to pause playing.(Used for models with MEDIA)
REVEAL: Press this button to reveal the hidden information in Teletext page. Press again
to hide the information. (Used for European region TV mode only)
Press to play backward.(Used for models with MEDIA)
SIZE: Display the top, bottom or all of page to read easily in Teletext mode. (Used for
European region TV mode only)
Press to play forward.(Used for models with MEDIA)
INDEX: Press this button to go to the index page in Teletext.
Stop playing Media.(Used for models with MEDIA)

8
Skip to previous chapter(Used for models with MEDIA)
S.PAGE: Carry out the function of SUBCODE in the text while enter the text display mode.
(Used for European region DTV mode only)
Skip to next chapter(Used for models with MEDIA)
TEXT: Press to enter the Teletext mode. (Used for European region TV mode only)
FAV: Switch between custom set " Favorite List" (Used for models with DTV function only)
AUDIO: Press to select the DTV audio.(Used for models with DTV function only)
DTV: Press to switch to DTV (Digital TV) mode
EPG: Enter electronic program guide.(Used for models with DTV function only)
TV/RADIO: Switch between DTV program and radio program (Only audio but not image).
(Used for models with DTV function only)
OSD basic adjustment
Mode Selection
The first boot will prompt mode Selection.
Use the ▲▼ direction buttons and ok button Select
your preferred picture type
Home mode: Suitable for a Dark room. Backlight
Brightness will be lower
Standard mode: Suitable for a normal environment.
Backlight Brightness is normal
Dynamic: Suitable for a bright room.
Mild: Suitable for reducing eye strain
On the mode menu, press the ▲▼ direction button to
select mode, and press the ok button to ok the selected
mode.
Installation Guide
If this is the first time you are turning on the TV and
there are no programs in the TV memory, the “Installation
Guide” menu will appear on the screen.
1. Press the “/” button to select the local language.
2. Press the “/” button to select the local country. Then
press “ENTER” button to do auto search and press the
“MENU” button to skip, or press the “EXIT” button to exit
if necessary.
Note: Searching for platform will take a long time, please be patient!

9
PICTURE
You can select the type of picture, which best corresponds
to your viewing.
1. Press the “MENU” button to enter the OSD menu.
Then press “/” button to select the “PICTURE”
menu.
2. Press “/” button to select “Picture Mode” and press
the “ENTER” button to enter sub-menu. Press “/”
button to select. (Available Picture mode: User, Dynamic, Standard, mild)
3. Press “/” button to select “Contrast” and press the “/” button to enter contrast
adjustment menu to adjust contrast.
4. Press “/” button to select “Brightness” and press the “/” button to enter
brightness adjustment menu to adjust brightness.
5. Press “/” button to select “Color” and press the “/” button to enter color
adjustment menu to adjust color.
6. Press “/” button to select “Sharpness” and press the “/” button to enter
sharpness adjustment menu to adjust sharpness.
7. Press “/” button to select “Tint” and press the “/” button to enter hue adjustment
menu to adjust tint.
Note: The 'Tint' item is used in NTSC mode only.
8. Press “/” button to select “Color Temperature” and press the “ENTER” button to
enter sub-menu. Press “/” button to select. (Available Color Temperature: Medium,
Cool, Warm User).
9. Red /Green /Blue is used in USER mode only
10. Press “/” button to select “Aspect Ratio” and press the “/” button to enter
Aspect Ratio adjustment menu to adjust Aspect Ratio（Auto 4:3 16:9 Zoom1
Zoom2 just Scan Panorama（.
11. Press “/” button to select “Noise Reduction” and press the “ENTER” button to enter
sub-menu. Press “/” button to select. (Available Noise Reduction: Off, Low, Middle,
High)
12. Press “/” button to select “screen” and press the “ENTER” button to enter sub-menu.
Press “/” button to select. (Only in the "PC"
state )
PC (When signal source is PC)
1. Press “/” button to select “Auto Adjust” menu and
press the “ENTER” button to do auto adjustment.
2. Press “/” button to select “Horizontal Pos.” and
press the “/” button to adjust.
3. Press “/” button to select “Vertical Pos.” and press the “/” button to adjust.
4. Press “/” button to select “Size” and press the “/” button to adjust.
5. Press “/” button to select “Phase” and press the “/” button to adjust.
SOUND
You can select the type of sound, which best corresponds to your listening.